Home > Panasonic > IP Phone > Panasonic Kx Tda50 User Manual

Panasonic Kx Tda50 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Panasonic Kx Tda50 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							2.1 Control Features
    User Manual 111
    To select the time service switching mode (Automatic/Manual)
    2.1.3 Dial Tone Transfer
    Besides the time mode, there is Holiday mode. It can change mode once on a specified 
    date.
    The Time Service (Day/Night/Lunch/Break) button light shows the current status as 
    follows:
    Off: Day mode
    Green on: Lunch mode
    Flashing Green: Break mode
    Red on: Night mode
    Flashing Red: Holiday mode
    The Time Service Switching Mode (Automatic/Manual) button light shows the current 
    status as follows:
    Off: Automatic
    Red on: Manual
    Customizing Your Phone
    3.1.3 Customizing the Buttons
    Create or edit a Time Service (Day/Night/Lunch/Break) button or a Time Service 
    Switching Mode (Automatic/Manual) button.
    The manager can change the restriction level, permitting an extension to make 
    a call.
    PT/SLT/PS
    Off-hook.On-hook.Enter    780.
    1
    0
    2
    3
    Day
    Night
    Lunch
    Break
    Enter 0 to 3 as you desire.
    807C.Tone
    PT/PS
    Press Time Service
    Switching Mode 
    (Automatic/Manual)
    .
    (Time Service
    Switching Mode
    (Automatic/Manual))
    While on-hook 
    						
    							2.1 Control Features
    112 User Manual
    2.1.4 External Background Music (BGM)
    The manager extension can broadcast background music in the office through external speakers.
    To start/stop the background music
    2.1.5 Outgoing Messages (OGM)
    The manager extension can record three kinds of greeting messages (OGM) as follows: The restriction level is changed to the preprogrammed level of Toll Restriction button.
    Customizing Your Phone
    3.1.3 Customizing the Buttons
    Create or edit a Toll Restriction (TRS) button.
    1.DISA message: Used to greet and guide callers so that they access 
    extension group or outside party without operator assistance.
    2.Incoming Call Distribution Group message: Used to greet and guide 
    callers to an incoming call distribution group.
    3.Timed Reminder message: Used for a wake-up call message when the 
    extension answers the Timed Reminder.
    During a conversation with an extension
    PT/PS
    (Toll Restriction)
    Press Toll Restriction.On-hook.
    The extension can hear the dial 
    tone and then make a call. C.Tone
    PT/SLT/PS
    Off-hook.On-hook.Enter    35.
    0
    Enter 1 to start 
    or 0 to stop.
    53C.Tone
    Enter 1.Start
    Stop
    OR1
    1 
    						
    							2.1 Control Features
    User Manual 113
    All messages have their own extension numbers. You can select the desired message. You have two 
    methods for recording a message. One is recorded using the handset, and the other is recorded from 
    an external BGM (MOH) port.
    To record
    To play back
    On-hook.
    Off-hook.
    PT
    Enter 1.
    1
    Record
    message.
    Press STORE.
    When the time limit passes, 
    it stops automatically.
    The message 
    is played back.Enter 
    OGM floating
    extension number.
    36OGM floating
    extension no.
    AUTO DIAL
    STORE
    Progress
    Tone & 
    C.Tone
    C.Tone
    Enter    36.
    The message 
    is played back. Off-hook.
    On-hook.
    2
    PT
    Enter    36.Enter 2.
    63C.Tone
    Enter OGM floating
    extension number.
    OGM floating
    extension no. 
    						
    							2.1 Control Features
    114 User Manual
    To record from an external BGM (MOH) port
    To clear the message
    Record voice messages only; avoid the recording of music.
    PT
    On-hook.
    Off-hook.Enter 31.
    31
    Press STORE.
    When the time limit 
    passes, it stops
    automatically.
    The message 
    is played back.
    The message
    is recorded.You hear
    the message.
    Press 
    CONF.
    36
    AUTO DIAL
    STORECONF
    Progress
    Tone & 
    C.Tone
    C.ToneC.Tone
    Enter OGM floating
    extension number.
    OGM floating
    extension no.
    Enter    36.
    PT
    Off-hook.
    0
    Enter     36.Enter 0.On-hook.
    63Progress 
    Tone & 
    C.Tone
    Enter OGM floating
    extension number.
    OGM floating
    extension no. 
    						
    							User Manual 115
    Section 3
    Customizing Your Phone & System
    This chapter shows you how to customize your 
    individual telephone or PBX according to your needs. 
    Find the desired setting and program as necessary. 
    						
    							3.1 Personal Programming
    116 User Manual
    3.1 Personal Programming
    3.1.1 Personal Programming
    You can customize your telephone features. For example, you can change the initial settings or button 
    features according to your needs.
    — Extension PIN (Personal Identification Number)
     Extension PIN (Personal Identification Number)
    You can assign a password to each extension.
    The following features require an extension PIN.
    1.Screening calls (Live Call Screening [LCS])
    2.Prohibiting other people from seeing your personal directory and call log (Directory and Call 
    Log Lock)
    3.Using the same settings as your extension at other extensions (Walking Extension)
    4.Remote Control Operation (Walking COS)
    5.Extension Lock Clear
    To set
    If you change your desk and extension, refer to 1.10.1 Walking Extension.
    PT/SLT/PS
    Off-hook.Enter    799. 
    1
    Enter 1. Enter extension 
    PIN (max. 10 digits).
    extension PIN
    #
    Enter #.
    same
    extension PIN#
     Enter #.On-hook.Enter same extension 
    PIN (max. 10 digits).
    799
    C.Tone
    PIN: Personal Identification Number 
    						
    							3.1 Personal Programming
    User Manual 117
    To cancel
    3.1.2 Settings on the Programming Mode
    You can program features using the programming mode.
    — Setting Features
    — Clearing Features
     Setting Features
    The default settings are shown in bold letters. For later reference, place a check mark in the boxes 
    below to indicate your customized setting.WARNING
    When a third party discovers the password (extension PIN) of the PBX, there will be 
    a risk that they will make fraudulent phone calls using the telephone line, and the 
    cost will be charged to your own account. In order to avoid this problem, we 
    strongly recommend the following points:
    a) Carefully maintain the secrecy of the PIN.
    b) Specify a complicated PIN as long and random as you can make it.
    c) Change the PIN frequently.
    Valid numbers for an extension PIN are 0 through 9.
    If the wrong extension PIN is entered for a preprogrammed number of times, the PIN is 
    locked. 
    If you forget your extension PIN or your extension PIN is locked, your manager can clear 
    the extension PIN and extension PIN lock.
    To exit at any time, lift the handset.
    To enter the programming mode when using a PS, refer to Operating Instructions for PS.
    PT/SLT/PS
    Off-hook.Enter    799. 
    0
    Enter 0. Enter stored extension PIN.
    On-hook.
    stored
    extension PIN799C.Tone
    PIN: Personal Identification Number 
    						
    							3.1 Personal Programming
    118 User Manual
    ItemProgramming 
    InputSelection & Parameter
    Your extension informationPT: The display shows the PBX number, slot number 
    and port number.
    
    PS: The display shows the PS number.
    
    Preferred display contrast 
    level from the 4 levels 
    available. 
    (Display Contrast 
    Selection)*
    1
     Light
     Little Light
     Little Dark
     Dark
    Which display language do 
    you prefer?
    (Display Language 
    Selection) English
     2nd Language
     3rd Language
     4th Language
     5th Language
    Follow programming
    input.
    To programTo exitTo enter the programming mode
    Follow Selection
    & Parameter. Press PROGRAMor PAUSE.Press PROGRAMor PAUSE.
    selection & 
    parameterprogramming
    inputOR
    PROGRAM
    PAUSEOR
    PROGRAM
    PAUSE
    Press ENTERor STORE.
    ORAUTO DIAL
    STORE
    Press ENTERor STORE.
    ORAUTO DIAL
    STORE
    00
    EXT1050:10308
    PBX no. Port no.
    Slot no.
    EXT3001:99001
    PS no.
    01
    1
    2
    3
    4
    02
    1
    2
    3
    4
    5 
    						
    							3.1 Personal Programming
    User Manual 119
    Would you like the call 
    duration to be shown 
    automatically on the display 
    when answering an outside 
    call?
    (Display Switching Mode) No—Manual (The display 
    keeps showing all of the outside 
    caller’s information unless you 
    change it to the call duration 
    manually.)
     Ye s—Automatic (The first 
    line of the display will change 
    to the call duration 
    automatically when you 
    answer an outside call.)
    Would you like to turn on 
    the display backlight of the 
    KX-T7633/KX-T7636?
    (Display Backlight 
    Selection)*
    1
     Ye s—ON in use
     Ye s—always ON
      No—always OFF
    Would you like to dial a 
    preset number simply by 
    going off-hook?desired no. (max. 32 digits)
     Do not use
     Use
    Should you prevent your 
    number being displayed on 
    the called party’s 
    telephone?
    (Calling Line Identification 
    Restriction [CLIR]) No—Allows your number 
    to be displayed
     Ye s—Prevents your number 
    being displayed
    Which do you prefer to 
    seize when you go off-hook 
    to make calls?
    (Preferred Line 
    Assignment—Outgoing) No line
     An idle CO line
     + 
    CO button no.*
    2 
    (01-36) 
    or  A CO/G-DN button
     
    or 
     Intercom ItemProgramming 
    InputSelection & Parameter
    03
    0
    1
    04
    0
    1
    2
    11
    12
    0
    1
    13
    0
    1
    19
    0
    1
    2
    (CO)
    3
    INTERCOM 
    						
    							3.1 Personal Programming
    120 User Manual
    Which line do you prefer to 
    answer when you go off-
    hook?
    (Preferred Line 
    Assignment—Incoming) No line
     The longest ringing line 
    (when multiple calls arrive)
     + 
    CO button no.*
    2 
    (01-36) 
    or  A assigned outside button
    How do you prefer to 
    receive an intercom call?
    (Alternate Receiving—
    Ring/Voice)*
    1
     Ringing (Tone Call)
     Directly—The party’s voice is 
    heard without ringing.
     Ring only—Prohibiting the 
    caller switching to the voice 
    mode.
    Should the single line 
    telephone in parallel ring? 
    (Paralleled Telephone)*
    1
     No—The telephone will not 
    ring.
     Ye s—The telephone will 
    ring.
    Do you prefer to answer a 
    call without going off-hook 
    regardless of the AUTO 
    ANS button status?
    (Forced Answerback 
    Selection)*
    1
     No—Disable
     Ye s—Enable
    Which service do you prefer 
    when a calling party is 
    recording a message in 
    your mailbox?
    (Live Call Screening Mode 
    Set)*
    1
     You can monitor the 
    message through the telephone 
    speaker. (Hands-free mode)
     Only an alarm tone is heard. 
    (Private mode)
    Would you like to keep 
    recording after answering 
    the call in the LCS mode? 
    (LCS Mode Set [After 
    Answering]) No—Stop recording
     Ye s—Keep recording ItemProgramming 
    InputSelection & Parameter
    20
    0
    1
    2
    (CO)
    21
    0
    1
    2
    22
    0
    1
    23
    0
    1
    25
    0
    1
    26
    0
    1 
    						
    All Panasonic manuals Comments (0)

    Related Manuals for Panasonic Kx Tda50 User Manual