Panasonic Kx-Td500 Features Guide

RFeatures Guide
212 Features Guide
Operation ReferencesOperator/Manager Service Features...............User Manual, Section 4.4 
Call Log Lock Control, Incoming
Live Call Screening Password Control 
Remote DND (Do Not Disturb) Control
Remote FWD (Call Forwarding) Cancel - Once
Remote Station Lock Control
Timed Reminder, Remote (Wake-Up Call) 

Features GuideR
Features Guide 213
Remote Station Lock Control
DescriptionAllows the Manager and the Operators to lock other extensions
remotely, that is, from their own extensions.
Locked extensions cannot be used for making calls, either outside
calls or intercom calls (except calls to the Operators and the emer-
gency calls) depending on the setting.
Conditions¥ Electronic Station Lockout Override
ÒRemote Station Lock ControlÓ overrides ÒElectronic Station Lockout.Ó
If Station Lockout has already been...

RFeatures Guide
214 Features Guide
Ringing, Delayed 
DescriptionThe extension can be set to ring immediately, delayed ringing, or no
ringing.
Conditions¥DIL 1:N Call
When a DIL 1:N call (an outside call directed to multiple extensions)
comes in, all destination extensions ring immediately by default.  This
setting can be changed to delayed ringing or no ringing on each mem-
ber of the DIL 1:N Group basis.
¥ 
At an ICM type PT, this feature does not apply to DISA or DIL 1:1
calls.
¥ 
Line Ringing...

Features GuideR
Features Guide 215
Ringing, Discriminating 
DescriptionAllows the extension user to identify the incoming call by the ring-
ing pattern (See Section 6.1 ÒTone / Ring ToneÓ in the Installation
Manual).  
Conditions¥ Call Ringing Priority
When there are multiple incoming calls and the extension goes from
off-hook to on-hook, the calls ring according to the following priority:    
 Consultation Hold Recall
 An incoming call from a line in which the Prime Line 
Preference Ð Incoming function...

RFeatures Guide
216 Features Guide
Ringing Tone Selection
DescriptionAllows the DPT user to select one of eight ringer frequencies for
each line access button (ICM, CO, DN).  This is useful to distin-
guish the type of incoming calls by ringing.
ConditionsNone 
Programming References
System Programming................................Installation Manual, Section 4
4.4.2  Line - Extension Line
Ñ Flexible CO Key Assignment
4.4.3  Line - DSS Console
Ñ Flexible DSS Key Assignment
User...

Features GuideR
Features Guide 217
Ringing Transfer
DescriptionIf the Extension 100 has an SDN button which corresponds with
the PDN button of the Extension 200 (PDN owner), the Extension
100 can transfer the call on the SDN button to the Extension 200
with a simple operation. This is called ÒRinging Transfer.Ó
Conditions¥SDN button
SDN button can be assigned to a flexible CO button on a DN type PT
by Station, User or System Programming.
¥FWD/DND Override
The call transferred by this feature overrides...

SFeatures Guide
218 Features Guide
Secret Dialing 
DescriptionUsed to conceal all or part of a registered telephone number that
normally appears on the display.  
Secret Dialing applies to the following features:
¥ One-Touch Dialing
¥ System Speed Dialing
¥ Station Speed Dialing(Special Display Features)
When a display PT user makes a call using a telephone number
with Secret Dialing, all or part of the number does not appear on
the display.
Conditions¥ CO line access code must be placed before placing...

Features GuideS
Features Guide 219
SPECIAL DISPLAY FEATURES Ñ SUMMARY
With the display telephone, KX-T7235, KX-T7431, KX-T7433 or KX-T7436, 
the extension user can easily access several features.  
The display telephones have the ability to perform the following features.
Ò4Ó indicates the feature is available.
Feature
Call Directory
Extension Dialing
Station Speed Dialing
System Speed Dialing
Call Forwarding / Do Not Disturb
Call Log, Outgoing
System Feature Access MenuKX-T7235
4
4
4
4
4
4
4
KX-T7433
4...

SFeatures Guide
220 Features Guide
Special Display Features 
Call Directory Ñ Extension Dialing
DescriptionProvides a display of extension names. This is convenient to make
an extension call just by name. The extension user can call another
extension simply by pressing the Function button associated with
the name.
Conditions¥ Extension name can be programmed either by User or System
Programming.
¥  Tenant Service
If Tenant Service is employed, only the extension names within the
same tenant are...

Features GuideS
Features Guide 221
Special Display Features 
Call DirectoryÑ Station Speed Dialing 
DescriptionA list of the names and telephone numbers stored in One-Touch
Dialing is displayed. This allows the extension user to make a One-
Touch call by knowing just the name.  
Conditions¥ It is necessary to program One-Touch Dialing Numbers and Names
into one of the 10 Function buttons (F1 through F10).  
¥Initial Display Selection
Initial display of Station Speed Dialing display can be number or...