Panasonic Kx-Td500 Features Guide

OFeatures Guide
182 Features Guide
Programming References
System Programming................................Installation Manual, Section 4
4.2.2  System - Numbering Plan
Ñ (45) Call Waiting Set/Cancel
4.2.3  System - Class of Service
Ñ Off-Hook Call Announcement (OHCA)
4.2.7  System - System Option
Ñ (32) Whisper OHCA to extensions other than T74XX
Feature ReferencesBusy Station Signaling (BSS)  Call Waiting
Off-Hook Call Announcement (OHCA)
Operation ReferencesStation Features and...

Features GuideO
Features Guide 183
Off-Hook Monitor
DescriptionAllows a PT user on a handset call to let other people around
him/her monitor the call by pressing the SP-PHONE button.
Conditions¥ This feature is available for KX-T7400 series PT only.
¥ If the SP-PHONE button is pressed during a handset call, either Off-
Hook Monitor or SP-PHONE mode (hands-free mode) will be estab-
lished. This is determined by System Programming (Section 4.2.7
System - System Option, (20) Off-hook MonitorÓ in the...

OFeatures Guide
184 Features Guide
Off Premise Extension (OPX)
DescriptionSLTs installed off the premise can be operated via a public or pri-
vate network in the same way as extensions on the premise.  These
telephones are called Off Premise Extensions (OPX).
Conditions¥ Hardware Requirements
OPX card (KX-T96185) or T-1 Digital trunk card (KX-T96187), and
OPX Power Unit (KX-T96186) are required.
¥  Ring Tone Pattern
When an incoming call is placed to an OPX, the ringing tone is same
as the CO line...

Features GuideO
Features Guide 185
One-Touch Dialing 
DescriptionOne-Touch Dialing offers the PT user One-Touch access to a
desired party or system feature by storing an extension number,
telephone number, account code or a feature number (up to 16 dig-
its) in a One-Touch Dialing button.  The number of buttons avail-
able depends on the type of PT.  One-Touch Dialing buttons can be
programmed to flexible buttons: CO, DSS or PF (Programmable
Feature).  
Conditions¥ Combination dialing
Speed Dialing,...

OFeatures Guide
186 Features Guide
One-Touch Transfer
DescriptionThis feature can be categorized as follows:
One-Touch Transfer (DSS or Phantom) forAutomatic Hold Ð All Calls
Allows the PT and DSS console users to transfer a call (extension,
outside) to another extension simply by pressing the DSS or
Phantom button (PT only) associated to that extension.
One-T
ouch Transfer (DSS) forAutomatic Hold Ð Trunk (DSS)
Allows the PT user to transfer an outside call to another extension
simply by pressing the DSS...

Features GuideO
Features Guide 187
Operator Call
DescriptionTo direct operator-seeking incoming calls to the Operators, one of
the following ways can be used.
Inter
com calls
Extension users can call the Operator:
- by dialing the feature number for Operator Call
- by dialing the FDN for Operator Group
Outside calls
To direct outside callers to the Operators, set the FDN of an
Operator Group as the destination of the following calls:
-DISA
-DID
-DIL 1:1
-IRNA
-TIE
Conditions¥  An operator-seeking call...

OFeatures Guide
188 Features Guide
Outgoing Message (OGM)
DescriptionAllows the Manager or an Operator to record and playback
Outgoing Messages. The following three types of Outgoing
Messages can be recorded.
DISA message: 
This message is played when an outside caller accesses the
system via DISA line.  
Timed Reminder (wake-up) message: 
This message is used in Timed Reminder.  When answering
the Timed Reminder alarm (often used as a wake-up call),
the extension user will hear this message. 
UCD...

Features GuideO
Features Guide 189
Feature ReferencesDirect Inward System Access OGM Group
(DISA)
Timed Reminder (Wake-Up Call)
Extension Group-Uniform Call Distribution (UCD) Group
Operation ReferencesOperator/Manager Service Features...............User Manual, Section 4.4
Outgoing Message (OGM) Record/Playback 

OFeatures Guide
190 Features Guide
Outgoing Message (OGM) Group
DescriptionOGM resources on the DISA card can be grouped together as an
OGM Group. Up to eight OGM Groups can be created in the sys-
tem.
Conditions¥ Tenant Service
If Tenant Service is employed, the affiliation of OGM Group should be
decided by System Programming.
Connection References
Installation..................................................Installation Manual, Section 2
2.6.1  DISA Card (KX-T96191)
Programming References
System...

Features GuideP
Features Guide 191
PAGING FEATURES Ð SUMMARY
DescriptionAllows the extension user to broadcast a paging announcement to
other users in the system.
The KX-TD500 System provides the following two types of
Paging.
¥  Paging - Station
Pages through the built-in speakers of PTs.
The extension user can make a paging announcement by specifying
one of Station Paging Groups or to all of them simultaneously.
A maximum of 16 Station Paging Groups, each consisting of
one or more Extension Groups, can...