Panasonic Kx-Td500 Features Guide

PFeatures Guide
192 Features Guide
Paging Ð All 
DescriptionAllows the extension user to make a voice announcement through
the built-in speakers of the PTs and the External Paging Equipment
(external pagers) simultaneously. The paged party can reply to the
paging announcement by dialing the feature number for paging
answer from any extension.  
Conditions¥ Confirmation tone for station paging
A confirmation tone is sent to extensions, when the paging is made or
answered.  Eliminating the tone is...

Features GuideP
Features Guide 193
Paging Ð External 
DescriptionAllows the extension user to make a voice announcement through the
External Paging Equipment (external pagers). Up to two External
Pagers can be installed in the system. It is possible to select one or
two pagers to perform the paging.  Any extension user can answer
the Paging Ð External by dialing the appropriate feature number.
Conditions¥ A user-supplied external pager is required to utilize this feature.  
¥ External Paging Priority...

PFeatures Guide
194 Features Guide
Paging Ð Group 
DescriptionAllows the extension user to make a voice announcement by speci-
fying one of 16 Paging Groups.  All PTs in the group will receive
the page. The paged party can reply to the paging announcement
by dialing the feature number for paging answer. 
Conditions¥ A maximum of 16 Paging Groups, each consisting of up to 24
Extension Groups, can be set up.
¥ A single Extension Group cannot belong to two or more different
Paging Groups at a time.
¥ A...

Features GuideP
Features Guide 195
Paging Deny 
DescriptionAllows the PT users to deny receiving a paging announcement
through the built-in speakers of their PTs.  
ConditionsNone
Programming References
System Programming................................Installation Manual, Section 4
4.2.2  System - Numbering Plan
Ñ (93) Paging Deny Set/Cancel
Feature ReferencesPAGING FEATURES
Operation ReferencesStation Features and Operation.......................User Manual, Section 4.3
Paging Deny 

PFeatures Guide
196 Features Guide
Paralleled Telephone 
DescriptionAny PT can be connected in parallel with an SLT.  
The following two combinations of telephones are available: 
(1)APT + SLT(an Analog Proprietary Telephone and a
Single Line Telephone/a single extension port)
(2)DPT + SLT(a Digital Proprietary Telephone and a Single
Line Telephone/a single extension port) 
When a parallel connection is made, an extension user can make
and answer a call using either one of two telephones.  
Conditions¥...

Features GuideP
Features Guide 197
Connection References
Installation..................................................Installation Manual, Section 2
2.4.12  Parallel Connection of the Extensions 
Programming References
System Programming................................Installation Manual, Section 4
4.1.3  Configuration - Extension Port Assignment
Ñ Parallel/XDP
Feature ReferencesEXtra Device Port (XDP)
Operation ReferencesStation Features and Operation.......................User Manual, Section 4.3...

PFeatures Guide
198 Features Guide
Pause Insertion, Automatic 
DescriptionUsed to insert a pre-assigned pausing time between the access code
(CO line/host PBX/Centrex/Special Carrier) and dialed digits.  
Conditions¥ This feature requires previous programming of the access code (CO
line/host PBX/Centrex/Special Carrier) as well as assignment of the
pause duration.
¥ This feature applies to:
This feature works for Speed Dialing, One-Touch Dialing, Last
Number Redial, Saved Number Redial, Pickup Dialing...

Features GuideP
Features Guide 199
PDN Call 
DescriptionIf the Extension 100 has an SDN button which corresponds with
the PDN button of the Extension 200 (PDN owner), the Extension
100 can call the Extension 200 simply by pressing the associated
SDN button twice.
The Extension 100 can also transfer a call (on the CO/PDN) to the
Extension 200 with a simple operation.
Conditions¥SDN button
An SDN button can be assigned to a flexible CO button on a DN type
PT by Station, User or System Programming.
¥FWD/DND...

PFeatures Guide
200 Features Guide
Phantom Extension
DescriptionThis allows the system to route the calls to a phantom extension.
The call to a phantom extension arrives at the extension who has
the corresponding Phantom button.  One phantom extension num-
ber can be assigned to multiple extensions so that the caller can
ring a group of extensions simultaneously.     
¥
The lighting patterns and status of the Phantom button are shown below.
Conditions¥ A phantom button can be assigned to a flexible CO...

Features GuideP
Features Guide 201
Pickup Dialing (Hot Line)
DescriptionAllows the extension user to call a predetermined extension or out-
side party automatically just by lifting the handset.  
This feature is also known as Hot Line.
If the feature is activated and the extension user goes off-hook, a
dial tone is generated for the waiting time and then dialing starts.
During the waiting time the user can dial another party, overriding
the Pickup Dialing function.
Conditions¥ To utilize this feature, an...