Panasonic Kx-Td500 Features Guide

TFeatures Guide
262 Features Guide
(2) Section 4.6.1 Toll Restriction - TRS Deny Code
Depending on the application, enter the TRS Deny codes in the
associated tables.  Numeric characters and the wild card character
ÒXÓ can be used.
(3) Section 4.6.2 Toll Restriction - TRS Exception Code
Depending on the application, enter the exception codes in the
associated tables.  Numeric characters and the wild card character
Ò
XÓ  can be used.
[Explanation]
If the extension userÕs Toll Restriction Level is 6;
a)...

Features GuideT
Features Guide 263
Flow Chart of
Toll RestrictionThe user makes a toll call.
Is the call made by System Speed
Dialing ? 
What is the extension Ð toll
restriction level?
Is the dialed number found in
applicable TRS Deny Code Tables?
Is the dialed number found in applicable
TRS Exception Code Tables?
The call is denied.  A reorder
tone is returned to the user.
Is TRS Override for System
Speed Dialing enabled?
The call is allowed.
Ye s
Levels  7, 8 Level  1
Levels  2, 3, 4, 5, 6Ye s
Ye s
Ye...

TFeatures Guide
264 Features Guide
Conditions¥ Toll restriction checks are applied to the following:
(1) Automatic Route Selection (ARS) 
(2) Account Code Entry
(3) Idle Trunk Dial Access
(4) Individual Trunk Group Dial Access  
(5) Individual Trunk Access
(6) Special Carrier Access 
(7) System Speed Dialing
¥ Emergency Numbers
The Emergency numbers such as Police or Fire Department should be
stored in System Program (Section 4.5.3 ÒFeatures - Emergency Dial
CodeÓ in the Installation Manual) so that they...

Features GuideT
Features Guide 265
Toll Restriction for Special Carrier Access
DescriptionIf your system has access to multiple telephone companies, access
to a specific company requires a carrier access code preceding the
telephone number.  Toll Restriction on these calls is activated by
storing the carrier codes (maximum 100). If a stored carrier code is
found in the dialed number, a toll restriction check starts for the
succeeding telephone number.
Conditions¥  Automatic Pause Insertion
A carrier...

TFeatures Guide
266 Features Guide
Toll Restriction Override by Account Code Entry
DescriptionAllows the extension user to override toll restriction temporarily to
make a toll call from a toll-restricted telephone.  The extension
user can carry out this feature by entering the appropriate account
code before dialing the telephone number.
Conditions¥ Class of Service Programming
This feature applies to the extension user whose Account Code Mode is
set to ÒVerified-Toll Restriction OverrideÓ by Class of...

Features GuideT
Features Guide 267
Programming References
System Programming................................Installation Manual, Section 4
4.2.2  System - Numbering Plan
Ñ (36) Account Code
4.2.3  System - Class of Service
Ñ Account Code Mode
4.5.5  Features - Account Code
Ñ Tenant No.
Ñ Entry No.
Ñ Code
Ñ TRS Level
Feature ReferencesAccount Code Entry Toll Restriction 
Operation ReferencesStation Features and Operation.......................User Manual, Section 4.3
Toll Restriction Override Ñ Toll...

TFeatures Guide
268 Features Guide
Toll Restriction Override for System Speed Dialing
DescriptionAllows the extension user to override Toll Restriction in System
Speed Dialing.  Normally, calls originated by System Speed
Dialing are restricted depending on the extensionÕs toll restriction
level.  Once this feature is activated, it permits extension users to
make System Speed Dialing calls without restriction.
Conditions¥ Tenant Service
This feature can be activated or deactivated on a tenant basis by...

Features GuideT
Features Guide 269
Traffic Measurement
DescriptionProvides current traffic information about following items individ-
ually.
You can collect and display the traffic information using the
Maintenance Console PC.
1. Station
2. Trunk Group 
3. Operator
4. UCD
5. OGM
6. AGC
ConditionsNone
Programming References
None 
Feature ReferencesNone
Operation ReferencesUtility.................................................Installation Manual, Section 5
Traffic Information 

TFeatures Guide
270 Features Guide
Trunk Access,  Direct 
DescriptionAllows the PT user to get an idle CO line for making a call by
pressing an idle CO button directly. This automatically establishes
the hands-free operation mode and allows the extension user to
perform On-Hook Dialing.  There is no need to press the SP-
PHONE button, MONITOR button nor lift the handset.
Conditions¥ The following three types of CO buttons can be programmed on an
extension by Station, User or System Programming: Single-CO...

Features GuideT
Features Guide 271
Trunk Access,  Idle 
DescriptionAllows the extension user to get an idle CO line for making an out-
side call by dialing the feature number for ÒLocal access/ARSÓ
(default=9). An idle CO line is automatically selected from the
Trunk Groups assigned for the extension. The PT user can use the
Loop-CO button instead of dialing the feature number.      
Conditions¥ This feature functions when Automatic Route Selection (ARS) is not
activated.  
¥ Class of Service...