Panasonic Kx Taw848 User Manual

1.9 User-supplied Equipment
User Manual 91
 Live Call Screening (LCS)
While a caller is leaving a message in your mailbox, you can monitor the call without 
answering. If you so desire, you can answer the call while monitoring. There are two 
methods available (Default: Hands-free mode).
Hands-free mode:
You can monitor the message automatically, live through the telephone speaker.
Private mode:
You will hear an alarm tone while the caller is leaving a message.
Before operating
Create a Live Call...

1.9 User-supplied Equipment
92 User Manual
To cancel Live Call Screening
Operation Flowchart
The operations in the shaded areas can be done hands-free.
Press red Live Call Screening.
PT/PS
(Live Call
 Screening)
Hands-free ModePrivate Mode
Stop 
monitoringAnswering 
the callStop 
monitoringAnswering
the call
MonitoringMonitoring (Hands-free) Monitoring (Handset)
No operation
Stop
monitoringAnswering
On-hook.
(Live Call
Screening)
(Alarm Tone)
Press SP-PHONE or MONITOR.Press Live Call 
Screening.
SP-...

1.9 User-supplied Equipment
User Manual 93
 Two-way Record
To record into your mailboxThe Live Call Screening (LCS) button light shows the feature status as follows:
Off: LCS is off.
Flashing green rapidly: Alerting in the Private mode.
Flashing green slowly: Monitoring.
Red on: LCS is on.
The manager extension can clear an extension PIN.
This feature is available for a single line telephone if it is connected to a 
proprietary telephone in parallel. (Private mode only)
To answer the call while...

1.9 User-supplied Equipment
94 User Manual
To record into another mailbox (Two-way Transfer)
To record into another mailbox with one-touch (One-touch Two-way Transfer)
The Two-way Record button light, Two-way Transfer button light or One-touch 
Two-way Transfer button light shows the current status as follows:
Off: Not recording.
On: Recording the conversation.
Note:
Many states have imposed regulations on the manner in which 2-way 
telephone conversations may be recorded, so you should inform the...

1.10 Walking Extension
User Manual 95
1.10 Walking Extension
1.10.1 Walking Extension
You can use the same functions assigned on your previous extension even if you move 
to another extension in the office. 
You can retain your settings such as extension number or One-touch Dialing memory etc. 
on the new extension.
This feature is also known as Walking Station.
To  s e t
Your previous extension will get the old settings of your new extension.
This feature is available for movement between SLT and SLT,...

1.11 Display Proprietary Telephone
96 User Manual
1.11 Display Proprietary Telephone
1.11.1 Call Log
This is available for the display proprietary telephone and the portable station.
— Incoming Call Log
 Incoming Call Log
When you receive an outside call, the caller’s information is recorded automatically in the 
incoming call log. A preprogrammed number of calls can be logged per extension.
When the call log is full and other call arrives, the oldest call is deleted.
You can modify the logged telephone...

1.11 Display Proprietary Telephone
User Manual 97
To clear the log information
To call
The Call Log button light shows the current status as follows: 
Off: No incoming call. Or you have already viewed the call log. 
Red on: You have missed calls to view.
If your call is answered by another extension, the caller’s information is 
recorded on the displays of both your extension and the answering extension.
You can lock your call log by using an extension PIN (Personal Identification 
Number), so that...

1.11 Display Proprietary Telephone
98 User Manual
1.11.2 Directories
You can select and call using the directories (Personal Speed Dialing Directory, System 
Speed Dialing Directory and Extension Number Directory). 
Only personal directories can be stored, edited or deleted on your extension.
If a call arrives while you are using a directory, the display will be replace with the caller’s 
information.
— Calling with the Directory
— Storing Names and Numbers
— Entering Characters
 Calling with the...

1.11 Display Proprietary Telephone
User Manual 99
 Storing Names and Numbers
To store a Personal Speed Dialing Directory itemTo cancel or exit, press the FLASH/RECALL button.
Directory entries generally should include name and number. If the name is not 
registered, an entry cannot be displayed.
Telephone number and name on the display are stored using the first spare 
Personal Speed Dialing memory available.
For a PS user, refer to Operating Instructions for PS.
For more details, refer to To store...

1.11 Display Proprietary Telephone
100 User Manual
 Entering Characters
You can enter the following characters. This table shows you the characters available for 
each button.