Panasonic Kx Taw848 User Manual

3.1 Personal Programming
User Manual 121
To clear the button*
2 For a PF button, 2 is not required to enter before the desired number.
*
3 This button is not available for a PS.
*4 0: Day/Night/Lunch/Break, 1: Day/Night/Break, 2: Day/Night/Lunch, 3: Day/
Night
*
5 This button is used for the integrated voice mail features.
To exit at any time, lift the handset.
You can select the parameter with the Navigator key (Up or Down) instead of 
entering a number.
Press PROGRAMor PAUSE.Press STORE.
2
Enter...

3.2 Manager Programming
122 User Manual
3.2 Manager Programming
3.2.1 Programming Information
The manager can program the following item.
Other Extensions Control
Available Extension
The extension assigned as a manager
Required Telephone
A Panasonic Proprietary Telephone with display 
(e.g., KX-T7735)
Manager Password
To enter programming mode, the manager password (max. 10 digits) is required. 
(Default: 1234)
Conditions
The programming extension must be idle, on-hook and holding no calls. 

3.2 Manager Programming
User Manual 123
3.2.2 Manager Programming
 Changing the Settings and Extension Control
Item Programming Input
Changing the manager password.
 +   + Password (max. 10 digits) + 
Locking/unlocking other extensions.
(Remote Extension Lock) +   + Extension no. +  (to lock)/
(to unlock) + 
Clearing the PIN and PIN lock for 
extensions. +   + Extension no. + 
Clearing the PIN and PIN lock for 
verified codes. +   + Verified code + 
Setting the verified code PIN. +   + Verified code +...

3.3 System Programming
124 User Manual
3.3 System Programming
3.3.1 Programming Information
You can customize your system according to your requirements.
[Your system already has default settings (factory installed).]
The programming is shown below. (Program number)
The date and time [000]
System speed dialing numbers and names [001]/[002]
Extension number and name [003]/[004]
Available Extension
The extension allowed through COS programming
Required Telephone
A Panasonic Proprietary Telephone with...

3.3 System Programming
User Manual 125
 Icon Descriptions
Fixed Buttons Function
PREVIOUS (PREV)
NEXT
SELECT
PROGRAM
STORE
END
CLEAR
FLASH
SECRET
SP-
PHONE
FLASH/RECALL 

3.3 System Programming
126 User Manual
 Procedure
The basic steps are shown below.
1.Entering the programming mode
2.Programming
You can enter each program number (3 digits).
3.Exiting the modeTo exit the programming mode at any time, lift the handset.
To exit the programming mode at any time, lift the handset.
Enter system password. Enter        . 
system password
Press PROGRAMor PAUSE.
OR
Press PROGRAMor PAUSE.
OR 

3.3 System Programming
User Manual 127
3.3.2 System Programming
 Date & Time [000]
The proprietary telephones display the current date and time while on-hook.
After changing the desired values, you can press the STORE button. You do 
not have to perform the rest of the steps.
The clock starts immediately after the STORE button is pressed.
You cannot leave a value empty.
You can clear the entry by pressing the CLEAR button.
To confirm your entry after storing data:
— The STORE button light: Lights...

3.3 System Programming
128 User Manual
 System Speed Dialing Number [001]
You can store the phone numbers of frequently dialed numbers.
If the desired number is more than 32 digits, divide the number and store it into 
a speed dialing number.
 , #, FLASH/RECALL, PAUSE, and SECRET (INTERCOM) can also be 
stored.
If you do not want to display the stored number when making a call, press the 
SECRET (INTERCOM) button before and after the numbers you wish to 
conceal.
If you store an outside party’s number,...

3.3 System Programming
User Manual 129
 System Speed Dialing Name [002]
You can store the name associated with the speed dialing number. These names are 
displayed when making calls using the display operation. To enter characters, refer to 
Entering Characters.
 Extension Number [003]
You can assign an extension number to each extension.
The leading number(s) should be the same as the number(s) assigned for 
Flexible Numbering. Consult your dealer.
A duplicate entry is invalid.
Enter 002. Enter system...

3.3 System Programming
130 User Manual
 Extension Name [004]
You can store the name of an extension user. This is useful if you want to know who is 
calling, or who you are calling when making an intercom call using the directory. 
To enter characters, refer to Entering Characters.
Enter 004.Press END.
Press NEXT. Press PREV.
To continue
To end004
Enter extension 
number.
extension no.
Enter name(max. 20 
characters).
name
OR
Press STORE.Press STORE.