Panasonic Kx Ta824 Programming Manual

2.2 PT Programming—Procedures
Programming Manual 71
g.Stop output: Not shown




Programming Manual References
[001] System Speed Dialing Number
[011] System Speed Dialing Name
Feature Manual References
1.1.112 Station Message Detail Recording (SMDR)
[805] SMDR Account Code
Selects whether to print out the 4-digit account code (CODE) stored in [310] Account Code or just the 2-digit 
index of the account code (INDEX) on SMDR.
Programming Manual References
[310] Account Code
[605] Account Code Mode
Feature...

2.2 PT Programming—Procedures
72 Programming Manual
[806] SMDR Language
Selects the display language used for SMDR.
Feature Manual References
1.1.112 Station Message Detail Recording (SMDR)
[807] BV Total Recording Time
Selects the total recording time for each BV resource.
Conditions
 The recording quality depends on the setting time.
20 (min): High; 30: Normal; 60: Low
Feature Manual References
1.1.8 Built-in Voice Message (BV)
[808] BV Card Initialization
Initializes the optional BV card installed in...

2.2 PT Programming—Procedures
Programming Manual 73
Programming Manual References
[504] DISA Delayed Answer Time
Feature Manual References
1.1.30 Caller ID
[901] Caller ID Area Code
Specifies the leading number (area code) that will identify an incoming call as a local call.
Programming Manual References
[902] Caller ID Modification for Local Calls
Feature Manual References
1.1.18 Call Log, Incoming
1.1.30 Caller ID
[902] Caller ID Modification for Local Calls
Selects the number of digits to be removed...

2.2 PT Programming—Procedures
74 Programming Manual
[903] Caller ID Modification for Long-distance Calls
Selects the number of digits to be removed from the beginning of the incoming callers number and the 
number to be added in place of the removed digits for long-distance calls.
Feature Manual References
1.1.18 Call Log, Incoming
1.1.30 Caller ID
[904] Caller ID Log Priority
Selects which caller information is shown first on the display of the PT.
Conditions
 This program is available when the Caller...

2.2 PT Programming—Procedures
Programming Manual 75
Feature Manual References
1.1.30 Caller ID
1.1.112 Station Message Detail Recording (SMDR)
[907] Caller ID SMDR Printout
Enables the PBX to display a callers telephone number on SMDR before the call is answered.
Feature Manual References
1.1.30 Caller ID
1.1.112 Station Message Detail Recording (SMDR)
[908] Call Waiting Caller ID Time
Selects the length of time that the Call Waiting Caller ID feature sent from the telephone company is shown 
on the...

2.2 PT Programming—Procedures
76 Programming Manual
[913] Call Waiting Caller ID Assignment
Enables the Call Waiting Caller ID feature for each outside (CO) line that has had Caller ID Service 
contracted from the telephone company.
Conditions
 When the Caller ID feature is disabled in [900] Caller ID, the Call Waiting Caller ID feature does 
not function even if it is enabled here.
Programming Manual References
[900] Caller ID
Feature Manual References
1.1.28 Call Waiting Caller ID
[914] Call Waiting...

2.2 PT Programming—Procedures
Programming Manual 77
[915] Caller ID Checksum
Enables or disables selection of the checksum mode. Normally, it should not be necessary to change the 
default setting.
Feature Manual References
1.1.28 Call Waiting Caller ID
1.1.30 Caller ID
[963] Call Forwarding Selection
Enables the PBX to forward the calls received on outside (CO) lines programmed as Normal in [414-416] 
CO Line Mode—Day/Night/Lunch. If this program is disabled, outside (CO) line calls cannot be forwarded...

2.2 PT Programming—Procedures
78 Programming Manual
[967] TRS Check Time after Answering
Specifies the length of time that the DTMF signal is checked when Enable is selected in [966] TRS Check 
after Answering.
Programming Manual References
[966] TRS Check after Answering
[968] KX-T7700 Series Incoming Lamp Control
Enables the Message/Ringer Lamp on KX-T7700/KX-TA30800 series telephones for the following incoming 
calls:
a.Incoming call from an outside (CO) line with Call Waiting Caller ID information...

2.2 PT Programming—Procedures
Programming Manual 79
[999] System Data Clear
Clears preprogrammed system data. The PBX will restart with the default settings.




Conditions
 Please refer to [804] System Data Dump for each parameter.
Programming Manual References
[804] System Data Dump
Feature Manual References
1.1.103 PT Programming
999NEXTENDSELECT
To continue
(All para/
System para/
Speed dial)
STORE
999NEXTENDSELECTSTORESTORE
To continue(1…
8/    )
CO line no.
(CO para)
999NEXTENDSELECTSTORESTORE
To...

2.2 PT Programming—Procedures
80 Programming Manual