Panasonic Kx Ta824 Programming Manual

2.2 PT Programming—Procedures
Programming Manual 41
Feature Manual References
1.1.75 Line Preference—Incoming
1.1.90 Outside (CO) Line Ringing Selection
1.1.109 Ringing, Delayed
[411-413] Delayed Ringing—Day/Night/Lunch
Specifies the delay after a call is received before the extension starts to ring if the extension is set to ring in 
[408-410] Flexible Ringing—Day/Night/Lunch.
Programming Manual References
[408-410] Flexible Ringing—Day/Night/Lunch
Feature Manual References
1.1.42 Direct Inward System...

2.2 PT Programming—Procedures
42 Programming Manual



Conditions
 After you select BV, do not change [008] Operator Assignment.
Programming Manual References
[008] Operator Assignment
[408-410] Flexible Ringing—Day/Night/Lunch
Feature Manual References
1.1.8 Built-in Voice Message (BV)
1.1.40 Direct In Line (DIL)
1.1.41 Direct Inward System Access (DISA)
1.1.99 PC Programming
4XNEXTCO line no.
(1…
8/    )(14…
16)
14: for day
15: for night
16: for lunch
name*name*STOREEND
(01…
24)
SELECT
SELECT...

2.2 PT Programming—Procedures
Programming Manual 43
[417] Pause Time
Selects the length of a pause inserted in dialing.
Programming Manual References
[311] Automatic Pause Insertion Code
[403] Host PBX Access Code
Feature Manual References
1.1.65 Host PBX Access Code (Access Code to the Telephone Company from a Host PBX)
1.1.98 Pause Insertion
[418] Flash/Recall Time
Selects the length of a flash/recall signal.
Feature Manual References
1.1.56 External Feature Access (EFA)
1.1.60 Flash/Recall
417NEXTCO...

2.2 PT Programming—Procedures
44 Programming Manual
[419] Automatic Designated Line Access
Specifies which outside (CO) line is seized automatically when an extension user dials the Automatic Line 
Access number (9).
Feature Manual References
1.1.72 Line Access, Automatic
1.1.76 Line Preference—Outgoing
[420] CPC Signal Detection—Incoming
Selects the length of time required by the PBX to detect a CPC signal from an incoming outside (CO) line 
call before disconnecting the line.
Notes
CPC signal detect...

2.2 PT Programming—Procedures
Programming Manual 45
[421] CPC Signal Detection—Outgoing
Enables the PBX to detect a CPC signal from outgoing outside (CO) line calls. If disabled, CPC signal 
detection is only activated during an incoming outside (CO) line call.
Programming Manual References
[420] CPC Signal Detection—Incoming
Feature Manual References
1.1.31 Calling Party Control (CPC) Signal Detection
[422] Disconnect Time
Selects the length of the disconnect signal sent from the PBX to the telephone...

2.2 PT Programming—Procedures
46 Programming Manual
[423] CO Line Ring Tone Pattern
Selects the ring tone pattern for incoming outside (CO) line calls.
Conditions
 It is recommended that you set a different ring tone pattern from the ring tone patterns specified in 
[115] Extension Ring Tone Pattern and [706] Doorphone Ring Tone Pattern.
Programming Manual References
[115] Extension Ring Tone Pattern
[706] Doorphone Ring Tone Pattern
Feature Manual References
1.1.108 Ring Tone Pattern Selection
[435]...

2.2 PT Programming—Procedures
Programming Manual 47
[436] Local Carrier-based Voice Mail Access Dial
Specifies the voice mail service access number. This program allows a PT user to access the telephone 
companys voice mail service when a message is left in the mailbox.
Feature Manual References
1.1.78 Local Carrier-based Voice Mail Service
[437] Extension Access to Local Carrier-based Voice Mail
Selects which extensions can access the voice mail service offered by the telephone company using each...

2.2 PT Programming—Procedures
48 Programming Manual
[438-440] DISA IRNA to BV—Day/Night/Lunch
Selects the common BV OGM used as the intercept destination of unanswered DISA calls in each time 
service mode.
Feature Manual References
1.1.8 Built-in Voice Message (BV)
[500] DISA Incoming Call Dial Mode
Selects the destination of an incoming outside (CO) line call via the DISA feature.
Notes
Without AA: Available destinations are extension numbers assigned in [009] Extension Number, 
Outside (CO) Line...

2.2 PT Programming—Procedures
Programming Manual 49
Conditions
 This program is available only when With AA is selected in [500] DISA Incoming Call Dial Mode.
 If you would like to use the Automatic Line Access number and/or Operator Call number in AA 
mode, do not assign AA number(s) that correspond to Automatic Line Access or Operator Call 
numbers (9 and/or 0).
Programming Manual References
[500] DISA Incoming Call Dial Mode
Feature Manual References
1.1.41 Direct Inward System Access (DISA)
[503]...

2.2 PT Programming—Procedures
50 Programming Manual
[510] DISA No Dial Mode
Feature Manual References
1.1.41 Direct Inward System Access (DISA)
[506] DISA Busy Mode
Selects how DISA calls are handled when a called extension is busy.


Feature Manual References
1.1.41 Direct Inward System Access (DISA)
1.1.88 Outgoing Message (OGM) for DISA
[507] DISA Intercept Mode
Selects how DISA calls are handled when the destination does not answer the call within a preprogrammed 
time period.
Feature Manual...