Home > Panasonic > System > Panasonic Kx Ta824 Feature Manual

Panasonic Kx Ta824 Feature Manual

Here you can view all the pages of manual Panasonic Kx Ta824 Feature Manual. The Panasonic manuals for System are available online for free. You can easily download all the documents as PDF.

Page 41

1.1 General Features
Feature Manual 41
Programming Manual References
[PT Programming]
[104] SLT Hold Mode
[115] Extension Ring Tone Pattern
[423] CO Line Ring Tone Pattern
[PC Programming]
9.1.11 Detail [1-10]—Extension—Ring Tone Pattern, Single Line Telephone—Hold Mode
9.2.2 Feature settings [2-2]—Call Waiting—intercom calls, Call Waiting—outside calls
9.2.3 PT personal settings [2-3]—Call Waiting Tone Type
9.3.3 Detail [3-3]—Ring Tone Pattern
Feature Manual References
1.1.9 Busy Station Signaling...

Page 42

1.1 General Features
42 Feature Manual
a)Is on a conference call
b)Has a call on consultation hold
c)Is using Live Call Screening (LCS) or 2-way Record
d)Is on an outside-to-outside (CO-to-CO) line call
e)Is hearing an outgoing message (OGM) used by Direct Inward System Access (DISA) or Built-in 
Voice Message (BV)
Installation Manual References
2.3.5 3-Por t Caller ID Card (KX-TA82493)
Programming Manual References
[PT Programming]
[414-416] CO Line Mode—Day/Night/Lunch
[900] Caller ID
[908] Call...

Page 43

1.1 General Features
Feature Manual 43
the incoming outside (CO) line call that is waiting. The user can answer the second call by disconnecting 
the current call or placing it on hold. 
Conditions
 If a call waiting tone is heard but the corresponding CO button does not flash, this tone is an external 
call waiting tone from the telephone company. For details, consult your telephone company.
Programming Manual References
[PT Programming]
[110] Flash/Recall Key Mode
[418] Flash/Recall Time
[PC...

Page 44

1.1 General Features
44 Feature Manual
Notes
 This feature complies with ETSI (European Telecommunications Standards Institute)-type FSK 
and Bellcore-type FSK.
 This feature does not comply with methods using DT-AS signal or line reversal signal.
1.Caller ID-Related Feature
2.Automatic Caller ID Number Modification
When Caller ID information is checked, the PBX can automatically modify the callers telephone number 
according to a preprogrammed set of rules (Caller ID Modification Table). This modified...

Page 45

1.1 General Features
Feature Manual 45

3.Displaying the Callers Name
When a call containing Caller ID information is received, the PBX will search for the callers name in the 
following order, then show that name on the display.
1)The System Speed Dialing Table
2)The Caller ID information received from the telephone company
If a callers name is not stored in the PBX or sent from the telephone company, it will not be displayed.
Conditions
[General]
Hardware Requirement: An optional Caller ID card for...

Page 46

1.1 General Features
46 Feature Manual
forwarded calls, intercepted calls, or calls from extensions that placed outside (CO) line calls on 
consultation hold.
 SLT Caller ID signaling type can be selected through system programming (  [150] SLT Caller ID 
Signaling Type).
 Each SLT (including an SLT connected in parallel with a PT) can be programmed to receive Caller ID 
information through system programming (  [628] SLT Caller ID).
 When the callers telephone number is sent to an SLT, an Outside...

Page 47

1.1 General Features
Feature Manual 47
[628] SLT Caller ID
[629] SLT Fixed Bell Pattern
[900] Caller ID
[901] Caller ID Area Code
[902] Caller ID Modification for Local Calls
[903] Caller ID Modification for Long-distance Calls
[904] Caller ID Log Priority
[906] Caller ID SMDR Format
[907] Caller ID SMDR Printout
[PC Programming]
9.9.1 Main [9-1]—CO Line Settings—Caller ID, Caller ID Modification—Local Area Code (for Local Call 1–
5), Caller ID Modification—Removed Digits, Caller ID Modification—Added...

Page 48

1.1 General Features
48 Feature Manual
 If a CPC signal is detected on a line during a conference call, that outside party will be disconnected 
but the remaining 2 parties can continue their call.
Programming Manual References
[PT Programming]
[420] CPC Signal Detection—Incoming
[421] CPC Signal Detection—Outgoing
[PC Programming]
9.3.3 Detail [3-3]—CPC Signal Detection—Incoming, CPC Signal Detection—Outgoing
Feature Manual References
1.1.41 Direct Inward System Access (DISA)
1.1.32 Class of Service...

Page 49

1.1 General Features
Feature Manual 49
1.1.33 Conference
Description
During a 2-party conversation, an extension user can add a third party to the conversation, thereby 
establishing a 3-party conference call.
Conditions
Conference call arrangement
The following configurations of 3-party conference calls are possible:
– One extension and 2 outside par ties
– 2 extensions and one outside party
– 3 extensions
Conference Button
On a proprietary telephone (PT) that does not have a CONF (Conference) button,...

Page 50

1.1 General Features
50 Feature Manual
1.1.34 Conference, Unattended
Description
The proprietary telephone (PT) user who originated a conference with 2 outside parties can leave the 
conference and allow the other parties to continue the conversation. The user may return to the conference 
at any time, if he or she desires.
Conditions
Conference Button
On a PT that does not have a CONF (Conference) button, a flexible CO button can be customized as 
a Conference button.
Consultation Hold
When an...
Start reading Panasonic Kx Ta824 Feature Manual

Related Manuals for Panasonic Kx Ta824 Feature Manual

All Panasonic manuals