Panasonic Kx Ta824 Feature Manual

1.1 General Features
Feature Manual 81
Call Waiting for outside (CO) line calls (set/
cancel)731(1/0) + #/0
Common BV Outgoing Message (OGM) 
(record/play/erase)72201–24 + (1/2/0) + #/0
Data Line Security (set/cancel)730(1/0) + #/0
Do Not Disturb (DND) (set/cancel)71(4/0) + #/0
Doorphone Call/Door Open31/551–4
Executive Busy Override Deny (set/cancel)733(0/1) + #/0
Extension Lock (set/cancel)770000–9999 (2 times/one time) + 
#/0
Extension Number100–199
External Feature Access (EFA) for an SLT6
Extension...

1.1 General Features
82 Feature Manual
2.Feature Numbering (available while a busy tone or DND tone is heard)
Features that are available while a busy tone or DND tone is heard have fixed numbers, as shown in 
the following table:
[Feature Numbering Table (available while a busy tone or DND tone is heard)]
3.Feature Numbering (available while dialing or talking)
Features that are available while dialing or talking have fixed numbers, as shown in the following table:Paging Deny (set/cancel)734(1/0) + #...

1.1 General Features
Feature Manual 83
[Feature Numbering Table (available while dialing or talking)]
4.Feature Numbering (available while on-hook)
Features that are available while on-hook have fixed numbers, as shown in the following table:
[Feature Numbering Table (available while on-hook)]
Conditions
 If a feature number includes   or # except for those that can use 0 instead of #, rotary SLT users 
cannot use it.
Feature number + Additional number (Parameter)
Certain feature numbers require...

1.1 General Features
84 Feature Manual
1.1.58 Firmware Upgrade
Description
It is possible to upgrade the PBX software via the Serial Interface (RS-232C) port or USB port using the KX-
TA Maintenance Console software. Even if a user upgrades the PBX software, the system data will not be 
lost. For more information on how to upgrade the PBX software, refer to the on-line help.
Conditions
 The ROM and the firmware version can be confirmed through system programming (  [998] Firmware 
Version).
Installation...

1.1 General Features
Feature Manual 85
[DSS Console]
Conditions
 Certain buttons are equipped with a light to indicate the status of the corresponding line or feature.SP-PHONE 
(Speakerphone)Used to select handset or hands-free operation.
MONITORUsed to select hands-free dialing and monitor operation.
MESSAGEUsed to leave a message waiting indication, call back the party who left a 
message waiting indication, or play back voice messages. This button is 
provided with an LED (Light Emitting Diode),...

1.1 General Features
86 Feature Manual
Feature Manual References
1.1.70 LED Indication
Operating Manual References
1.1.1 Before Operating a Telephone
1.1.60 Flash/Recall
Description
A proprietary telephone (PT) user can use the FLASH/RECALL button to disconnect the current call and 
star t another call without hanging up. For example, if this button is used to disconnect an outside (CO) line, 
the extension user will hear a new dial tone from the same outside (CO) line.
Conditions
FLASH/RECALL Button...

1.1 General Features
Feature Manual 87
1.1.112 Station Message Detail Recording (SMDR)
Operating Manual References
1.3.46 Flash/Recall
1.1.61 Flexible Buttons
Description
Flexible buttons are buttons whose functions can be customized through either system or personal 
programming. The following types of flexible buttons are found on proprietary telephones (PTs) and/or 
Direct Station Selection (DSS) Consoles:
a)Flexible CO buttons
b)Flexible DSS buttons
c)Programmable Feature (PF) buttons
d)Flexible...

1.1 General Features
88 Feature Manual
Conditions
Extension button confirmation
A display PT user can confirm the button settings, such as the flexible CO button, by pressing the 
corresponding button while on-hook.
 The Day, Night, Lunch, and Extension Lock buttons can only be assigned to flexible DSS buttons at an 
extension assigned as the operator or manager. SaveUsed to store a telephone number while in a conversation with an outside par ty 
or while hearing a busy tone, and then easily redial the...

1.1 General Features
Feature Manual 89
Programming Manual References
[PC Programming]
9.2.4 Flexible Buttons [2-4]
Feature Manual References
1.1.10 Call Forwarding (FWD)—SUMMARY
1.1.18 Call Log, Incoming
1.1.33 Conference
1.1.69 Intercom Call
1.1.71 Line Access, Outside (CO) Line—SUMMARY
1.1.80 Log-in/Log-out
1.1.82 Message Waiting
1.1.86 One-touch Dialing
1.1.87 Operator/Manager Features
1.1.105 Redial, Last Number
1.1.114 Time Service
1.1.120 Voice Mail APT Integration
Operating Manual References
3.1.3...

1.1 General Features
90 Feature Manual
1.1.63 Hands-free Operation
Description
A proprietary telephone (PT) user can dial and talk to another party without lifting the handset. Pressing 
specific buttons automatically activates hands-free mode.
Conditions
PTs with the MONITOR Button
PTs with the MONITOR button can dial in hands-free mode but cannot have hands-free conversations.
 Hands-free mode is canceled if an extension user does not start dialing within 10 seconds.
 This feature can be used by...