Panasonic Kx Ta824 Feature Manual

1.1 General Features
Feature Manual 101
 It is possible to specify which outside (CO) lines are connected to the PBX (  [400] CO Line 
Connection). This prevents extension users from trying to select or making calls using outside (CO) 
lines that are not connected.
Programming Manual References
[PT Programming]
[206] Dialing Start Time
[400] CO Line Connection
[405-407] Flexible Outward Dialing—Day/Night/Lunch
[419] Automatic Designated Line Access
[PC Programming]
9.1.7 Timers [1-6]—CO Dialing—Dialing...

1.1 General Features
102 Feature Manual
 System programming determines the extension users that can make outside (CO) line calls in each 
time service mode (  [405-407] Flexible Outward Dialing—Day/Night/Lunch).
 It is possible to specify which outside (CO) lines are connected to the PBX (  [400] CO Line 
Connection). This prevents extension users from trying to select or making calls using outside (CO) 
lines that are not connected.
Programming Manual References
[PT Programming]
[206] Dialing Start...

1.1 General Features
Feature Manual 103
 It is possible to specify which outside (CO) lines are connected to the PBX (  [400] CO Line 
Connection). This prevents extension users from trying to select or making calls using outside (CO) 
lines that are not connected.
Programming Manual References
[PT Programming]
[206] Dialing Start Time
[400] CO Line Connection
[405-407] Flexible Outward Dialing—Day/Night/Lunch
[PC Programming]
9.1.7 Timers [1-6]—CO Dialing—Dialing Start Time
9.3.2 Incoming / Outgoing...

1.1 General Features
104 Feature Manual
 A flexible CO button should be assigned as an Outside (CO) Line Access button (Single-CO [S-CO], 
Group-CO [G-CO] or Other-CO [O-CO]) before selecting a line preference.
 Setting a new line preference clears the previous line preference.
 In Prime Line mode, if a PT user receives an incoming call on a line other than the Prime Line, the 
user must go off-hook and then press the corresponding flashing CO button to answer the call.
Programming Manual References...

1.1 General Features
Feature Manual 105
Line Preference Override
A user can override the preset line preference temporarily by pressing the desired Outside (CO) Line 
Access button or INTERCOM button before going off-hook.
 System programming determines the extension users that can make outside (CO) line calls in each 
time service mode (  [405-407] Flexible Outward Dialing—Day/Night/Lunch).
 It is possible to specify which outside (CO) lines are connected to the PBX (  [400] CO Line 
Connection)....

1.1 General Features
106 Feature Manual
Conditions
LCS/LCS Cancel Button
A flexible CO/DSS button can be customized as an LCS or LCS Cancel button.
 To prevent the unauthorized screening of calls, a 3-digit password must be entered when activating LCS 
for an extension. If the user forgets his or her password, it can be cleared by the operator or manager 
(LCS Password Control).
 If an extension user is screening a call and then goes off-hook to answer it, the VPS will either stop or 
continue...

1.1 General Features
Feature Manual 107
Conditions
Hardware Requirement: An optional Caller ID card.
 The voice mail service access number can be up to 32 digits long, assigned for each outside (CO) line 
through system programming (  [436] Local Carrier-based Voice Mail Access Dial). During this 
programming, pressing the INTERCOM (SECRET) button before and after any confidential parts of the 
number allows a PT user to prevent the display of all or part of a number (  1.1.111 Secret Dialing).
...

1.1 General Features
108 Feature Manual
1.1.79 Lockout
Description
If one par ty in a conversation goes on-hook, the call between both parties will be disconnected. A reorder 
tone is sent to the off-hook party before the call is disconnected. 
Conditions
Lockout applies to:
Intercom calls and outside (CO) line calls.
 If an extension user does not dial anything within a certain period of time after the other party goes on-
hook, a reorder tone will be sent to the extension and then it will be...

1.1 General Features
Feature Manual 109
Feature Manual References
1.1.42 Direct Inward System Access (DISA) Ring
1.1.61 Flexible Buttons
1.1.67 Idle Extension Hunting
Operating Manual References
1.3.59 Log-in/Log-out
3.1.3 Flexible Button Assignment—Log-in/Log-out button
1.1.81 Memory Dialing
Description
An extension user can store frequently dialed numbers in the PBX. A stored number can be dialed by a 
simple operation.
1.Features
2.Valid InputFeature Storage Method Details in
One-touch DialingPersonal...

1.1 General Features
110 Feature Manual
[Example of Secret Dialing]
When storing the number 91234567890, to prevent the telephone number 1234567890 from being 
displayed when making a call:
Notes
 The characters for secret code, [ and ] (entered by pressing the INTERCOM button), are 
counted as one digit each.
 It is not possible to hide the Outside (CO) Line Access number (9, or 81 through 88) by 
pressing the INTERCOM button before dialing it.
Conditions
Outside (CO) Line Access by Memory Dialing...