Panasonic Kx Ta824 Feature Manual

1.1 General Features
Feature Manual 121
– Calls forwarded by the FWD to Outside (CO) Line feature (  1.1.14 Call Forwarding (FWD)—To 
Outside (CO) Line)
– Calls transferred by the Call Transfer to Outside (CO) Line feature (  1.1.26 Call Transfer—To 
Outside (CO) Line)
– Calls using the DISA feature (  1.1.41 Direct Inward System Access (DISA))
– Calls using the Unattended Conference feature (  1.1.34 Conference, Unattended)
Programming Manual References
[PT Programming]
[205] CO-to-CO Line Call...

1.1 General Features
122 Feature Manual
– Ringing or busy PTs
– PTs in Paging Deny mode
– PTs in DND mode (  1.1.44 Do Not Disturb (DND))
Installation Manual References
2.8.1 Connecting Peripherals
Programming Manual References
[PT Programming]
[106] External Pager Access Tone
[600] Extension Group
[PC Programming]
9.1.11 Detail [1-10]—Extension—External Pager Access Tone
9.2.2 Feature settings [2-2]—Paging Deny
9.2.11 Extension Group [2-6]—Group No.
Feature Manual References
1.1.44 Do Not Disturb (DND)...

1.1 General Features
Feature Manual 123
Conditions
Hardware Requirement: A user-supplied external pager.
 A confirmation tone will be sent to the external pager before the paging announcement. It is possible 
to eliminate the tone through system programming (  [106] External Pager Access Tone). 
Installation Manual References
2.8.1 Connecting Peripherals
Programming Manual References
[PT Programming]
[106] External Pager Access Tone
[PC Programming]
9.1.11 Detail [1-10]—Extension—External Pager Access...

1.1 General Features
124 Feature Manual
1.1.96 Paging—Group
Description
An extension user can make a paging announcement to a certain extension group. The paging 
announcement can be heard through the built-in speakers of the proprietary telephones (PTs) that belong 
to the certain extension group (  [600] Extension Group).
Programming Manual References
[PT Programming]
[600] Extension Group
[PC Programming]
9.2.11 Extension Group [2-6]—Group No.
Feature Manual References
1.1.53 Extension Group
Operating...

1.1 General Features
Feature Manual 125
– In Hands-free Answerback mode (  1.1.62 Hands-free Answerback).
– In Voice-calling mode (Alternate Receiving—Ring/Voice) (  1.1.69 Intercom Call).
 An extension user cannot make a call from the SLT if the PT is:
– Playing background music (BGM)
– Receiving a paging announcement over the built-in speaker
– In programming mode
 Both the PT and the SLT will ring for incoming calls (if the ringer is turned on).
 If one telephone goes off-hook while the other...

1.1 General Features
126 Feature Manual
 When a dialed telephone number matches one of the Automatic Pause Insertion codes assigned 
through system programming (  [311] Automatic Pause Insertion Code), a pause will be automatically 
inser ted after the code. This is particularly convenient if a second dial tone is sent from your telephone 
company.
 This feature functions for Speed Dialing, One-touch Dialing, Last Number Redial, Saved Number 
Redial, Hot Line, and Call Forwarding (FWD)—To Outside (CO)...

1.1 General Features
Feature Manual 127
2.Connection Methods for Remote Programming
Conditions
 Only one system programming session is permitted at a time. Access will be denied to a second party 
who tries to perform system programming, including system programming via a PT.
 System programming can be performed either in interactive or batch mode.
System Password 
To access system programming in interactive mode, a valid password must be entered. The password 
is set at the factory but can be changed...

1.1 General Features
128 Feature Manual
[PT Programming]
[002] System Password
[414-416] CO Line Mode—Day/Night/Lunch
[PC Programming]
9.1.2 Main [1-2]—System Password
9.3.1 Line Mode [3-1]—Mode of incoming CO calls—Day, Night, Lunch
Feature Manual References
1.1.25 Call Transfer—To Extension
1.1.40 Direct In Line (DIL)
1.1.41 Direct Inward System Access (DISA)
1.1.103 PT Programming
1.1.100 Personal Speed Dialing
Description
An extension user can use short numbers to frequently dialed numbers that are...

1.1 General Features
Feature Manual 129
1.1.101 Power Failure Restart
Description
When the electricity is turned back on, the PBX restarts and automatically loads stored data.
Conditions
 In the event of a power failure, PBX memory is protected by a factory-installed lithium battery. There is 
no memory loss except the memories of Automatic Callback Busy (  1.1.4 Automatic Callback Busy 
(Camp-on)), Call Park (  1.1.19 Call Park), and Redial (  1.1.105 Redial, Last Number, 1.1.106 
Redial, Saved...

1.1 General Features
130 Feature Manual
Feature Manual References
1.1.97 Paralleled Telephone
Operating Manual References
1.3.76 Power Failure Transfer
1.1.103 PT Programming
Description
A proprietary telephone (PT) can be used to customize the settings of the PBX or of an extension, using the 
following programming features:
Conditions
 The manager extension is the extension that is connected to the lowest-numbered jack (jack 01) of the 
PBX and can therefore perform manager programming.
 Only one...