Panasonic Kx Ta824 Feature Manual

1.1 General Features
Feature Manual 21
Operating Manual References
1.3.7 Built-in Voice Message (BV)
2.1.3 Common BV Outgoing Messages
3.1.3 Flexible Button Assignment—FWD/DND, Message, or Caller ID Indication—Personal/Common button
1.1.9 Busy Station Signaling (BSS)
Description
When an extension user attempts to call a busy extension (i.e., an extension that is ringing or having a 
conversation), a call waiting tone will be sent to the called extension to indicate another call is waiting.
Conditions
...

1.1 General Features
22 Feature Manual
[Available Destinations]
Conditions
FWD/DND Button
If a proprietary telephone (PT) does not have an FWD/DND button, a flexible CO button can be 
customized as an FWD/DND button.
[Button Status]
The FWD/DND button shows the current status as follows:
 Setting a new FWD mode, such as All Calls or Busy/No Answer, or the DND feature, clears the status 
of the previous FWD mode or DND feature.
Programming Manual References
[PT Programming]
[202] Call Forwarding Start...

1.1 General Features
Feature Manual 23
9.1.7 Timers [1-6]—Start Time—Call Forwarding
9.2.1 Main [2-1]—Call Forward to CO
9.2.2 Feature settings [2-2]—FWD/DND
9.8.1 Main [8-1]—BV for Extension
Feature Manual References
1.1.59 Fixed Buttons
1.1.61 Flexible Buttons
Operating Manual References
1.3.7 Built-in Voice Message (BV)
1.3.9 Call Forwarding (FWD)—SUMMARY
1.3.88 Voice Mail Integration
3.1.3 Flexible Button Assignment—FWD/DND button
1.1.11 Call Forwarding (FWD)—All Calls
Description
All calls are...

1.1 General Features
24 Feature Manual
 The destination of an extensions forwarded calls can call or transfer calls to the original extension.
Programming Manual References
[PT Programming]
[414-416] CO Line Mode—Day/Night/Lunch
[963] Call Forwarding Selection
[PC Programming]
9.2.1 Main [2-1]—FWD Selection
9.3.1 Line Mode [3-1]—Mode of incoming CO calls—Day, Night, Lunch
Feature Manual References
1.1.82 Message Waiting
Operating Manual References
1.3.10 Call Forwarding (FWD)—All Calls
1.1.12 Call...

1.1 General Features
Feature Manual 25
 When a call is forwarded, the corresponding message waiting indication is not forwarded. The 
MESSAGE button light or Message/Ringer Lamp turns on only at the originally called extension (  
1.1.82 Message Waiting).
 It is programmable whether the calls received on outside (CO) lines programmed as Normal (  [414-
416] CO Line Mode—Day/Night/Lunch) are forwarded for each extension or not (  [963] Call 
Forwarding Selection). If FWD is enabled for an extension...

1.1 General Features
26 Feature Manual
1.1.13 Call Forwarding (FWD)—Follow Me
Description
When an extension user fails to set this feature before leaving his or her desk, this feature can be set from 
the destination extension.
Conditions
 This feature does not apply to calls from Hold Recall, Camp-on Recall, and Timed Reminder.
 The types of calls that are forwarded by this feature are:
 When a call is forwarded, the corresponding message waiting indication is not forwarded. The 
MESSAGE button light...

1.1 General Features
Feature Manual 27
[PC Programming]
9.2.1 Main [2-1]—FWD Selection
9.3.1 Line Mode [3-1]—Mode of incoming CO calls—Day, Night, Lunch
Feature Manual References
1.1.11 Call Forwarding (FWD)—All Calls
1.1.82 Message Waiting
Operating Manual References
1.3.12 Call Forwarding (FWD)—Follow Me
1.1.14 Call Forwarding (FWD)—To Outside (CO) Line
Description
All calls are forwarded to an outside party, provided this feature is enabled for each extension through 
system programming (  [607] Call...

1.1 General Features
28 Feature Manual
 If a CPC (Calling Party Control) signal is received from an outside (CO) line, the corresponding call 
between 2 outside parties will be disconnected.
Programming Manual References
[PT Programming]
[205] CO-to-CO Line Call Duration
[414-416] CO Line Mode—Day/Night/Lunch
[605] Account Code Mode
[607] Call Forwarding to CO Line
[PC Programming]
9.1.7 Timers [1-6]—Call Duration—CO-to-CO Duration Limit
9.2.1 Main [2-1]—Account Code Mode, Call Forward to CO
9.3.1 Line...

1.1 General Features
Feature Manual 29
SLT Hold Mode
It is possible to specify how calls are held and transferred with an SLT when the Recall/hookswitch is 
pressed for less than 1000 ms. 
The following methods (  [104] SLT Hold Mode) are available:
In some cases, a call is not disconnected when an SLT user goes on-hook. Instead, the call is 
mistakenly placed on hold. After a specified time expires, the Hold Recall tone is heard. When the SLT 
user answers this, the user hears a cyclic tone (like a...

1.1 General Features
30 Feature Manual
1.1.16 Call Hold, Exclusive
Description
A proprietary telephone (PT) user can put a call on hold. Only the PT user who held the call can retrieve it.
Conditions
 This feature is not available on single line telephones (SLTs).
 If an outside party is placed on hold and the call is not retrieved within 30 minutes, the call is 
automatically disconnected.
Music on Hold
Music, if available, is sent to the outside party on hold (  1.1.85 Music on Hold). An external...