Panasonic Kx Ta824 Feature Manual

1.1 General Features
Feature Manual 11
Conditions
 An account code can be stored in Memory Dialing (One-touch Dialing, Hot Line, Personal Speed 
Dialing, System Speed Dialing, Call Forwarding (FWD) to Outside (CO) Line, etc.). In this case, the 
Account Code feature number and specified account code must be entered after the Outside (CO) Line 
Access number.
 An extension user does not need to enter an account code for incoming outside (CO) line calls.
 Even in Forced/Verify-All/Verify-Toll mode,...

1.1 General Features
12 Feature Manual
1.1.112 Station Message Detail Recording (SMDR)
1.1.118 Toll Restriction (TRS) Override by Account Code
Operating Manual References
1.3.2 Account Code Entry
1.1.3 Answering, Direct Outside (CO) Line
Description
A proprietary telephone (PT) user can answer incoming calls simply by pressing the flashing CO button.
Conditions
 This feature allows the user to specify which line to answer when multiple incoming outside (CO) lines 
are ringing.
Operating Manual...

1.1 General Features
Feature Manual 13
1.1.5 Automatic Configuration for Outside (CO) Line Type
Description
The dialing mode (DTMF [Dual Tone Multi-Frequency]/Pulse) of connected outside (CO) lines is 
automatically assigned after restarting the PBX using the System Clear Switch or through system 
programming (  [999] System Data Clear). No system programming in [401] Dial Mode and [402] Pulse 
Speed is required unless the dialing mode of the connected outside (CO) line is Call Blocking. Automatic...

1.1 General Features
14 Feature Manual
1.1.6 Automatic Time Adjustment
Description
The PBX clock can be adjusted automatically according to the time information received from your 
telephone company. Time information can be received when an incoming call with Caller ID that includes 
time information is received. 
The PBX clock will be adjusted every day with the first call after 3:05 A.M., if enabled through system 
programming (  [152] Automatic Time Adjustment).
Note
Since the PBX clock is put ahead...

1.1 General Features
Feature Manual 15
 This feature can be turned on and off by dialing 1 while the extension is on-hook and idle, if BGM is 
enabled through system programming (  [626] BGM Control for APT).
Installation Manual References
2.8.1 Connecting Peripherals
Programming Manual References
[PT Programming]
[111] Music on Hold
[626] BGM Control for APT
[PC Programming]
9.1.2 Main [1-2]—Music on Hold
9.2.1 Main [2-1]—BGM Control for APT 
Feature Manual References
1.1.85 Music on Hold
Operating...

1.1 General Features
16 Feature Manual
messages, totaling 10 minutes, the personal and common message areas can jointly store up to 115 
messages or 50 minutes.
[Example: Pattern A]
[Example: Pattern B]
BV Resource 1
Common 
Message Area
• Common BV OGM
 Common Voice
  Message
 Personal BV OGM
 Personal Voice
  MessagePersonal 
Message Area
Operator or Manager 
(Extn. 101)
Personal 
Message Area
 Personal BV OGM
 Personal Voice
  Message
Extn. 102
Personal 
Message Area
 Personal BV OGM
 Personal...

1.1 General Features
Feature Manual 17
[Example: Pattern C]
If there are new voice messages in a users personal message area or the common message area (if 
accessible), the user will hear a special dial tone (dial tone 4) when going off-hook. In addition, if that users 
telephone has a MESSAGE button or Message/Ringer Lamp, the corresponding button or lamp will light 
when a message has been left. A MESSAGE button can be used to listen to the message after the user 
goes off-hook. Pressing the lit...

1.1 General Features
18 Feature Manual
In this example:
If an outside (CO) line call is received on outside (CO) line 1:
a)In day mode: The common BV OGM to be played (BV01) for BV distribution is assigned. 
The caller hears the specified common BV OGM and leaves a voice message in the 
common message area.
b)In night/lunch mode: The common BV OGM to be played (BV02) for BV distribution is 
assigned. The caller hears the specified common BV OGM and leaves a voice message 
in the common message area.
If...

1.1 General Features
Feature Manual 19
Conditions
Hardware Requirement: An optional voice message card.
 The BV feature does not use OGMs for DISA on either the preinstalled DISA OGM card or the optional 
message expansion card for DISA OGMs (if present) (  1.1.88 Outgoing Message (OGM) for DISA).
 When an extension that belongs to BV resource 1 or BV resource 2 is reassigned to the other resource, 
the voice messages that were recorded prior to reassignment are erased, but the personal/common BV...

1.1 General Features
20 Feature Manual
 A voice message area cannot be included as a member of a conference call.
 Even if a caller does not leave a voice message in either the personal or common message area, for 
example, by going on-hook while hearing a personal/common BV OGM, the information is still logged 
in the corresponding Incoming Call Log (common or personal area) and displayed by SMDR (  
1.1.112 Station Message Detail Recording (SMDR)).
 A PT user can listen to voice messages by entering...