Panasonic KX MB773 User Manual

							11. Help
81
1Insert the CD-ROM that is included with the unit into your CD-ROM drive.
L[Panasonic Setup] dialogue box will appear.
2[Tools] i [Windows Firewall Setting]
LThe [Windows Firewall Setting Tool] window will appear.
3[Add to the exceptions list] i [OK] i [OK]
To confirm the security settings (For Windows XP users)
1.[Start] i [Control Panel] i [Security Center]
LThe [Windows Security Center] window will appear.
2.[Windows Firewall]
LThe [Windows Firewall] dialogue box will appear.
3.Click the [Exceptions] tab.
4.Confirm that [Panasonic Trap Monitor Service] and [PCCMFLPD] are displayed and checked on the 
[Programs and Services] list.
To confirm the security settings (For Windows Vista users)
1.[Start] i [Control Panel] i [Security Center]
LThe [Windows Security Center] window will appear.
2.[Windows Firewall]
LThe [Windows Firewall] dialogue box will appear.
3.[Change Settings]
LThe [User Access Control] dialogue box will appear.
4.[Continue]
5.Click the [Exceptions] tab.
6.Confirm that [Panasonic Trap Monitor Service], [PCMFSMLM] and [PCCMFLPD] are displayed and checked 
on the [Program or Port] list.
MB263HX_773_783EX-PFQX2807ZC-OI-en.book  Page 81  Monday, August 6, 2007  11:42 AM
Downloaded From ManualsPrinter.com Manuals 
						

							12. Paper Jams
82
12 Paper Jams Jams
12.1 Recording paper jam
12.1.1 When the recording paper has 
jammed inside of the unit
The display will show the following.
PAPER JAMMED
b
OPEN TOP COVER
CHECK REAR COVER
Caution:
LDo not pull out the jammed paper forcibly before 
opening the top cover.
LTo prevent injuries, be careful not to put your 
hands under the top cover.Case 1:
When the recording paper has jammed near the 
manual input tray:
1.Pull open the paper input tray (1).
2.Open the manual input tray (2) and remove the 
jammed paper (3) carefully by pulling it upwards. 
Then close the manual input tray.
1
3
2
MB263HX_773_783EX-PFQX2807ZC-OI-en.book  Page 82  Monday, August 6, 2007  11:42 AM
Downloaded From ManualsPrinter.com Manuals 
						

							12. Paper Jams
83
3.Close the paper input tray.
LOpen and close the top cover (4) to clear the 
error message.Case 2:
When the recording paper has jammed near the 
drum and toner unit:
1.Pull open the paper input tray (1).
2.Lift the top cover release lever (2) and open the top 
cover (3).
Note:
LDo not touch the transfer roller (5).
4
Caution:
The fuser unit (4) gets hot. Do not touch 
it.
1
2
4
3
5
MB263HX_773_783EX-PFQX2807ZC-OI-en.book  Page 83  Monday, August 6, 2007  11:42 AM
Downloaded From ManualsPrinter.com Manuals 
						

							12. Paper Jams
84
3.Remove the jammed paper (6) carefully by pulling it 
upwards.
Remove the jammed paper (7) carefully by pulling it 
toward you.4.Close the paper input tray.
5.Close the top cover until locked.
6
7
MB263HX_773_783EX-PFQX2807ZC-OI-en.book  Page 84  Monday, August 6, 2007  11:42 AM
Downloaded From ManualsPrinter.com Manuals 
						

							12. Paper Jams
85
Case 3:
When the recording paper has jammed near the 
fuser unit:
1.Lift the top cover release lever (1) and open the top 
cover (2).
Note:
LDo not touch the transfer roller (4).
2.Lift both green levers (5) until they stop.3.Remove the jammed paper (6) carefully by pulling it 
upwards.
4.Push back the green levers (7) to the original 
position.
5.Close the top cover until locked. Caution:
The fuser unit (3) gets hot. Do not touch 
it.
1
3
2
4
5
6
7
MB263HX_773_783EX-PFQX2807ZC-OI-en.book  Page 85  Monday, August 6, 2007  11:42 AM
Downloaded From ManualsPrinter.com Manuals 
						

							12. Paper Jams
86
12.1.2 When the recording paper is not fed 
into the unit properly
The display will show the following.
CHECK PAPER #1
PRESS START
1Pull the paper input tray until it clicks into place, then 
pull it completely out, lifting the front part of the tray. 
Remove the recording paper and straighten.
2Re-load the recording paper.
3Insert the paper input tray to the unit, lifting the front 
part of the tray. Then push it completely into the unit.
Note:
LIf the error message is still displayed, check the 
recording paper specifications and re-install 
recording paper. See page 18 for details.
12.1.3 When the recording paper in the 
manual input tray is not fed into the unit 
properly
The display will show the following.
CHECK PICK UP
INPUT TRAY #2
1Remove the recording paper.
2Re-insert the recording paper.
Note:
LIf the error message is still displayed, check the 
recording paper specifications and re-install 
recording paper. See page 32 for details.
MB263HX_773_783EX-PFQX2807ZC-OI-en.book  Page 86  Monday, August 6, 2007  11:42 AM
Downloaded From ManualsPrinter.com Manuals 
						

							12. Paper Jams
87
12.2 Document jams (Auto 
document feeder) (KX-MB773/KX-
MB783 only)
Caution:
LDo not pull out the jammed document forcibly 
before lifting the ADF cover.
1Open the ADF cover (1) while holding the 
document cover (2).
2Remove the jammed document (3) carefully.When the document has jammed near the 
document entrance:
When the document has jammed near the 
document exit:
3Close the ADF cover.
1
2
3
3
MB263HX_773_783EX-PFQX2807ZC-OI-en.book  Page 87  Monday, August 6, 2007  11:42 AM
Downloaded From ManualsPrinter.com Manuals 
						

							13. Cleaning
88
13 Clean in g Cleaning
13.1 Cleaning the white plates 
and glass
Clean the white plates and glass when a black line, a 
white line or a dirty pattern appears on:
– your recording paper,
– the original document,
– the scanned data, or
– the fax document received by the other party (KX-
MB773/KX-MB783 only).
Caution:
LBe careful when handling the drum and toner 
unit. See the caution for the drum unit on page 13 
for details.
LDo not use paper products, such as paper towels 
or tissues, to clean the inside of the unit.
13.1.1 White plates and scanner glass
1
Open the document cover (1).
2Hold the document cover (2) while cleaning the 
white plates (3) and the scanner glass (4).
3Close the document cover (5).
1
2
3
4
5
MB263HX_773_783EX-PFQX2807ZC-OI-en.book  Page 88  Monday, August 6, 2007  11:42 AM
Downloaded From ManualsPrinter.com Manuals 
						

							13. Cleaning
89
13.1.2 Lower glass
1
Disconnect the power cord.
2Lift the top cover release lever (1) and open the top 
cover (2).
Note:
LDo not touch the transfer roller (4).
3Remove the drum and toner unit (5) by holding the 
tabs.
4Clean the lower glass (6) with a soft and dry cloth.
5Reinstall the drum and toner unit (7) by holding the 
tabs.
Caution:
The fuser unit (3) gets hot. Do not touch 
it.
1
3
2
4
5
6
7
MB263HX_773_783EX-PFQX2807ZC-OI-en.book  Page 89  Monday, August 6, 2007  11:42 AM
Downloaded From ManualsPrinter.com Manuals 
						

							13. Cleaning
90
LMake sure that the triangles (8) match, to install 
the drum and toner unit correctly.
6Close the top cover until locked.Caution:
LTo prevent injuries, be careful not to put your 
hands under the top cover.7Re-connect the power cord.
8
MB263HX_773_783EX-PFQX2807ZC-OI-en.book  Page 90  Monday, August 6, 2007  11:42 AM
Downloaded From ManualsPrinter.com Manuals