Panasonic Kx Fpg378 Operating Instructions Manual

8. Programmable Features
69
8.3 Basic features
{#}{0}{0} Setting the Quick Setup
QUICK SETUP
PRESS SET
LPress {SET} 2 times before pressing the 
direct command button. See page 21 for 
details.
{1} “TAM/FAX” (default)
{2} “DIST. RING”
{3} “TEL ONLY”
{4} “FAX ONLY”
{#}{0}{1} Setting the date and time
SET DATE & TIME
PRESS SET
LEnter the date and time using the dial 
keypad. See page 29 for details.
{#}{0}{2} Setting your logo
YOUR LOGO
PRESS SET
LEnter your logo using the dial keypad. See 
page 30 for...

8. Programmable Features
70
{#}{1}{3} Setting the dialing mode
DIALING MODE
MODE=TONE [±]
If you cannot make calls, change this setting 
depending on your telephone line service.
{1} “PULSE”: For rotary pulse dial service.
{2} “TONE” (default): For tone dial service.
Note:
LYou can also program this feature with the 
handset (page 76).
{#}{1}{6} Setting the recording paper size
PAPER SIZE 
=LETTER [±]
{1} “LETTER” (default): Letter or legal size 
paper.
{2} “A4”: A4 size paper.
{#}{1}{7} Setting the...

8. Programmable Features
71
7.Enter the fax number.
8.Press {SET}.
9.Enter the transmission start time.
LPress {*} repeatedly to select “AM” or 
“PM”.
10.Press {SET}.
11.Press {MENU}.
Note:
LTo cancel after programming, press {STOP} 
then {SET}.
{#}{2}{6} Setting the Caller ID list to print 
automatically
AUTO CALL. LIST
MODE=OFF [±]
{1} “ON”: The Caller ID list will be printed 
automatically each time the base unit logs 30 
different callers (page 39).
{2} “OFF” (default): The Caller ID list will not be...

8. Programmable Features
72
{#}{4}{1} Changing the fax activation code
FAX ACTIVATION
MODE=ON [±]
If you wish to use a handset (page 51) or an 
extension telephone (page 52) to receive faxes, 
activate this feature and program the activation 
code.
{1} “ON” (default)
{2} “OFF”
1.Press {MENU}.
2.Press {#}, then {4}{1}.
3.Press {1} to select “ON”.
4.Press {SET}.
5.Enter your code from 2 to 4 digits, using 0–9, 
{*} and {#}.
LThe default code is “;#9”.
LDo not enter “0000”.
6.Press {SET}.
7.Press {MENU}....

8. Programmable Features
73
3.Press {1} to select “ON”.
4.Press {SET}.
5.Enter the transfer telephone number, up to 30 
digits.
6.Press {SET}.
7.Press {MENU}.
{#}{6}{1} Checking, recording or erasing 
the transfer greeting message
TRNS-GREETING
CHECK [±]
{1} “CHECK” (default)
{2} “RECORD”
{3} “ERASE”
See page 65 for details.
{#}{6}{7} Setting the incoming message 
monitor
ICM MONITOR
MODE=ON [±]
To hear an incoming message (ICM) from the 
speaker when the answering machine is 
recording the message.
{1}...

8. Programmable Features
74
Features (Hands et)
8.5 Handset programming
Important information
LMake sure the handset and base unit are 
not being used.
1Press {MENU}.
2Press the code number ({0} to {9} and {#}).
3Press the desired direct command to display 
the desired setting.
LThis step may be slightly different 
depending on the feature.
4Press {Save} (soft key 1).
5Press {OFF}.
Note:
LTo exit programming, press {OFF} at any 
time.
8.6 Direct command chart for handset
For more details on the features,...

8. Programmable Features
75
Number of rings{0}{6}{1}{2}: “2” (default) {3}: “3” {4}: “4” 
{5}: “5” {6}: “6” {7}: “7” 
{0}: “Toll saver”page 53
Recording time{0}{6}{2}{1}: “1min” {2}: “2min”
{3}: “3min” (default)
{0}: “Greeting only”page 77
Remote code{0}{6}{3}---------- page 77
Display language{0}{8}{1}: “English” (default) 
{2}: “Español”page 77
Message alert{0}{#} {1}: “On” {0}: “Off” (default) page 77
FeatureFeature codeDirect commandPage
FPG379-PFQX2138ZA-en.book  Page 75  Wednesday, January 12, 2005...

8. Programmable Features
76
8.7 Programming features
{1}{1} Changing the ringer volume
{1} Low
{2} Medium
{3} High (default)
{0} Off
See page 27 for details.
{1}{2} Setting ringer tone for outside calls
To set the handset ringer tone from one of 7 
patterns for outside calls. You can select “Tone 
1” (default), “Tone 2”, “Tone 3”, “Melody 
1”, “Melody 2”, “Melody 3” or “Melody 4”.
{1} “Tone 1” (default)
{2} “Tone 2”
{3} “Tone 3”
{4} “Melody 1”
{5} “Melody 2”
{6} “Melody 3”
{7} “Melody 4”
{2} Playing back...

8. Programmable Features
77
{0}{6}{1} Changing the ring setting in 
TAM/FAX mode
To change the number of rings before the unit 
answers a call in TAM/FAX mode. See page 53 
for details.
{2} “2” (default)
{3} “3”
{4} “4”
{5} “5”
{6} “6”
{7} “7”
{0} “Toll saver”
Note:
LYou can also program this feature with the 
base unit (feature #06 on page 69).
{0}{6}{2} Changing the maximum 
recording time for incoming messages
{1} “1min”: 1 minute
{2} “2min”: 2 minutes
{3} “3min” (default): 3 minutes
{0} “Greeting...

9. Option
78
9Option Han dset Registra tion
9.1 Re-registering the 
handset
If “No link to base. Move closer to 
base, try again.” is displayed even when 
the handset is near the base unit, you may need 
to re-register the handset to the base unit.
Make sure the base unit and the handset are 
near each other and not being used.
Registration must be completed within 1 
minute.
LKeep the front cover page open for button 
locations.
1Base unit:
Press and hold {LOCATOR/INTERCOM} 
until a beep sounds.
L“HS...