Panasonic Kx Flb881 Operating Instruction Manual

9. Programmable Features
61
9.7 LAN features
Feature/CodeSelection
LAN setting with a DHCP 
server
{#}{5}{0}{0}{0} “DISABLED”: Deactivates this feature.
{1} “ENABLED” (default): The following will be allocated automatically using a 
DHCP (Dynamic Host Configuration Protocol) server.
– IP address
– Subnet mask
– Default gateway
Setting the IP address for the 
LAN connection
{#}{5}{0}{1}This feature is available when feature #500 is deactivated.
1.{MENU} i {#}{5}{0}{1} i {SET}
2.Enter the IP address of the...

9. Programmable Features
62
Setting HTTPD for the LAN 
connection
{#}{5}{3}{4}{0} “DISABLED”: Denies access to the web browser.
{1} “ENABLED” (default): Allows access to the web browser.
Feature/CodeSelection
FLB881-PFQX2732ZA-OI-en.book  Page 62  Wednesday, July 18, 2007  11:22 PM 

9. Programmable Features
63
9.8 Network features (LAN connection only)
These features can be programmed only by using the web browser.
Note:
LSee the following sections for details on these related features:
– Change password (feature #155 on page 52)
– DHCP mode (feature #500 on page 61)
– IP address (feature #501 on page 61)
– Subnet mask (feature #502 on page 61)
– Default gateway (feature #503 on page 61)
– DNS server #1 (feature #504 on page 61)
– DNS server #2 (feature # 505 on page 61)
– Machine...

10. Useful Information
64
10 Useful Information U se ful  In for m at i on
10.1 Character entry
The dial keypad is used to enter characters and 
numbers.
–Press {} to move the cursor.
– Press dial keys to enter characters and numbers.
–Press {STOP} to erase the character or number 
highlighted by the cursor. Press and hold {STOP} to 
erase all characters or numbers.
– To enter another character located on the same dial 
key, press {>} to move the cursor to the next space, 
then press the appropriate dial...

10. Useful Information
65
10.2.2 Using Device Monitor
You can confirm the setting information and current 
status of the unit from your computer.
1Start Multi-Function Station.
2[Utilities] i [Device Monitor]
LThe [Device Monitor] window will appear.
3Confirm the status of the unit.
[Status]: Current status of the unit
Note:
LAdditional information (toner and recording paper 
status, unit information, etc.) will be displayed in 
[Status] tab by clicking [Advanced Information].
LThe status of the unit...

10. Useful Information
66
10.5 Optional handset unit
You can add the optional handset unit. See page 6 for 
accessory information.
1Connect the handset cord (1).
2Connect the handset connector (2).
LRemove the seal from the handset unit 
connection jack if attached.
3Insert the tab (3) and rib (4).Caution:
LWhen moving the unit, be sure to hold by the 
grip. Do not hold by the handset unit.
To remove the handset unit
1.Pull the handset unit slightly forward (1), then lift it in 
the direction of the...

11. Help
67
For assistance, please visit http://www.panasonic.com/help
11 Help
11.1 Error messages – Reports
If a problem occurs during fax transmission or reception, one of the following messages will be printed on the 
confirmation and journal reports (page 38).
MessageCodeCause & Solution
COMMUNICATION ERROR40-42
46-72
FFLA transmission or reception error occurred. Try 
again or check with the other party.
43
44LA line problem occurred. Connect the telephone line 
cord to a different jack and try...

11. Help
68
For assistance, please visit http://www.panasonic.com/help
11.2 Error messages – Display
If the unit detects a problem, one or more of the following messages will appear on the display.
DisplayCause & Solution
“CALL SERVICE”LThere is something wrong with the unit. Contact our service personnel.
“CARRIAGE ERROR”LThere is something wrong with the carriage sensor. Contact our service 
personnel.
“CHANGE DRUM”LThere is something wrong with the drum unit. Replace the drum unit and the 
toner...

11. Help
69
For assistance, please visit http://www.panasonic.com/help “OUT OF PAPER INPUT TRAY 
#1”LRecording paper is not installed or the input tray has run out of paper. Install 
paper (page 13, 26).
LRecording paper is not fed into the unit properly. Reinstall paper (page 13, 
26).
LThe paper input tray is not installed or is not inserted completely. Insert the 
paper input tray into the unit.
Note:
L“#1”: Paper input tray
L“#2”: Manual input tray
“PAPER JAMMED”
“OPEN TOP COVER”LA recording paper...

11. Help
70
For assistance, please visit http://www.panasonic.com/help
Troublesh ooting
11.3 When a function does not work
11.3.1 General
ProblemCause & Solution
The unit does not work.LCheck the connections (page 15, 22).
The output tray becomes full 
quickly or the recording 
paper does not stack properly 
on the output tray.LHigh humidity may cause the recording paper to curl. Try turning the paper 
over and re-inserting it. If the curl on the paper is heavy, please remove it 
from the output tray. If...