Panasonic Kx Flb811 Operating Instruction Manual

							9. Help
79
For assistance, please visit http://www.panasonic.com/consumersupport
Waste disposal method
Waste material should be disposed of under 
conditions which meet all national and local 
environmental regulations.
Jams
9.5 Recording paper jam
9.5.1 When the recording paper 
has jammed inside of the unit
The display will show the following.
PAPER JAMMED
b
OPEN TOP COVER
Caution:
LDo not pull out the jammed paper forcibly 
before opening the top cover.
1Lift the top cover release lever (1) and open 
the top cover (2).
Important:
LClose the manual input tray (3) before 
opening the top cover.
Note:
LDo not touch the transfer roller (5). Caution:
The fuser unit (4) gets hot. Do not 
touch it.
3
1
4
2
5
FLB811-PFQX2307ZB-en.book  Page 79  Thursday, February 16, 2006  3:57 PM 
						

							9. Help
80
For assistance, please visit http://www.panasonic.com/consumersupport
2Remove the jammed paper.
Case 1:
When the recording paper has jammed 
near the drum and toner unit:
1.Pull the paper input tray completely out.
2.Remove the jammed paper (1) carefully 
by pulling it upwards.
Remove the jammed paper (1) carefully 
by pulling it toward you.
3.Insert the paper input tray into the unit.Case 2:
When the recording paper has jammed 
near the fuser unit:
1.Lift both green levers (1) until they stop.
2.Remove the jammed paper (1) carefully 
by pulling it upwards.
3.Push back the green levers (1) to the 
original position.
1
1
1
1
1
FLB811-PFQX2307ZB-en.book  Page 80  Thursday, February 16, 2006  3:57 PM 
						

							9. Help
81
For assistance, please visit http://www.panasonic.com/consumersupport Case 3:
When the recording paper has jammed 
near the output tray (KX-FLB811 only):
1.Pull and hold the lever (1) to release the 
jammed paper.
2.Remove the jammed paper (1) carefully 
by pulling it upwards.
3Close the top cover until locked.
Caution:
LTo prevent injuries, be careful not to 
put your hands under the top cover.
1
1
FLB811-PFQX2307ZB-en.book  Page 81  Thursday, February 16, 2006  3:57 PM 
						

							9. Help
82
For assistance, please visit http://www.panasonic.com/consumersupport
9.5.2 When the recording paper 
is not fed into the unit properly
The display will show the following.
CHECK PICK UP
INPUT TRAY #1
1Pull the paper input tray completely out, then 
remove the recording paper and straighten.
2Re-load the recording paper.
3Insert the paper input tray into the unit.
Note:
LIf the error message is still displayed, check 
the recording paper specifications and re-
install recording paper. See page 18 for 
details.
9.5.3 When the recording paper 
in the manual input tray is not fed 
into the unit properly
The display will show the following.
CHECK PICK UP
INPUT TRAY #2
1Remove the recording paper.
2Re-insert the recording paper.
Note:
LIf the error message is still displayed, check 
the recording paper specifications and re-
install recording paper. See page 19 for 
details.
FLB811-PFQX2307ZB-en.book  Page 82  Thursday, February 16, 2006  3:57 PM 
						

							9. Help
83
For assistance, please visit http://www.panasonic.com/consumersupport
9.6 Document jams (Auto 
document feeder)
Caution:
LDo not pull out the jammed document 
forcibly before lifting the ADF cover.
1Hold the ADF cover firmly and lift it to open 
the upper part (1) of the ADF cover.
2When the document has jammed near the 
document entrance:
Remove the jammed document (1) 
carefully.When the document has jammed near the 
document exit:
Press the ADF cover release button (1) and 
open the middle part (2) of the ADF cover.
Remove the jammed document (3) 
carefully.
3Close the ADF cover.
1
1
1
3
2
FLB811-PFQX2307ZB-en.book  Page 83  Thursday, February 16, 2006  3:57 PM 
						

							9. Help
84
For assistance, please visit http://www.panasonic.com/consumersupport
Clean in g
9.7 Cleaning the white 
plate and glasses
Clean the white plate and glasses when a black 
line, a white line or a dirty pattern appears on:
– your recording paper,
– the original document,
– the data scanned by the computer, or
– the fax document received by the other party.
Caution:
LBe careful when handling the drum and 
toner unit. See the caution for the drum 
unit on page 76 for details.
LDo not use paper products, such as paper 
towels or tissues, to clean the inside of 
the unit.
9.7.1 White plate and scanner 
glasses
1Disconnect the power cord.
2Open the document cover (1).
3Press the ADF cover release button (1) and 
open the middle part (2) of the ADF cover.
4Clean the scanner glass (1) and the white 
cover sheet (2) and its circumference (3) 
with a soft and dry cloth.
LClean the white cover sheet carefully to 
avoid damaging it.
5Close the ADF cover (1), then hold the 
document cover (2) while cleaning the white 
plate (3) and the scanner glass (4).
1
1
2
13 2
1
2
3
4
FLB811-PFQX2307ZB-en.book  Page 84  Thursday, February 16, 2006  3:57 PM 
						

							9. Help
85
For assistance, please visit http://www.panasonic.com/consumersupport
6Close the document cover (1).
7Re-connect the power cord.
If the document cover comes off from the 
unit
1.Attach the hinges (1) to the document cover 
(2).
LMake sure that the inserted direction is 
correct. Otherwise, the hinges cannot be 
inserted into the slots in step 3.2.Lay down the hinges (1).
3.Insert the hinges (1) into the slots (2) on 
the unit.
4.Close the document cover.
1
12
1
1
2
FLB811-PFQX2307ZB-en.book  Page 85  Thursday, February 16, 2006  3:57 PM 
						

							9. Help
86
For assistance, please visit http://www.panasonic.com/consumersupport
9.7.2 Lower glass
1Disconnect the power cord.
2Lift the top cover release lever (1) and open 
the top cover (2).
Important:
LClose the manual input tray (3) before 
opening the top cover.
Note:
LDo not touch the transfer roller (5).
3Remove the drum and toner unit (1) by 
holding the tabs.
4Clean the lower glass (1) with a soft and dry 
cloth.
5Reinstall the drum and toner unit (1) by 
holding the tabs.
LMake sure that the triangles (2) match to 
install the drum and toner unit correctly. Caution:
The fuser unit (4) gets hot. Do not 
touch it.
3
1
4
2
5
1
1
1
2
FLB811-PFQX2307ZB-en.book  Page 86  Thursday, February 16, 2006  3:57 PM 
						

							9. Help
87
For assistance, please visit http://www.panasonic.com/consumersupport
6Close the top cover until locked.
Caution:
LTo prevent injuries, be careful not to 
put your hands under the top cover.
7Re-connect the power cord.
9.8 Cleaning the 
document feeder rollers
Clean the rollers when the document or 
recording paper frequently misfeeds.
1Disconnect the power cord.
2Hold the ADF cover firmly and lift it to open 
the upper part (1) of the ADF cover.
3Press the ADF cover release button (1) and 
open the middle part (2) of the ADF cover.
1
1
2
FLB811-PFQX2307ZB-en.book  Page 87  Thursday, February 16, 2006  3:57 PM 
						

							9. Help
88
For assistance, please visit http://www.panasonic.com/consumersupport
4Clean the document feeder rollers (1) with a 
cloth moistened with isopropyl rubbing 
alcohol, and let all parts dry thoroughly.
LClean the rollers in the direction of the 
arrow to avoid the discharge brush (2) 
from being pulled.
5Close the ADF cover.
6Re-connect the power cord.
2
1
FLB811-PFQX2307ZB-en.book  Page 88  Thursday, February 16, 2006  3:57 PM