Panasonic KX FLB758RU User Manual
Have a look at the manual Panasonic KX FLB758RU User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
5.31. NOTES FOR ASSEMBLING 5.31.1. PINCH ROLLER SPRING 5.31.2. FAN MOTOR 61 KX-FLB75 8RU Downloaded From ManualsPrinter.com Manuals
5.31.3. SCANNE R GLASS ASS’Y 62 KX-FLB75 8RU Downloaded From ManualsPrinter.com Manuals
5.31.4. FCC (DIGITAL BOARD) 63 KX-FLB75 8RU Downloaded From ManualsPrinter.com Manuals
5.32. INSTALLATION POSITION OF THE LEAD 64 KX-FLB75 8RU Downloaded From ManualsPrinter.com Manuals
65 KX-FLB75 8RU Downloaded From ManualsPrinter.com Manuals
66 KX-FLB75 8RU Downloaded From ManualsPrinter.com Manuals
67 KX-FLB75 8RU Downloaded From ManualsPrinter.com Manuals
68 KX-FLB75 8RU Downloaded From ManualsPrinter.com Manuals
6 TROUBLESHOOTING GUIDE
6.1. USER RECOVERABLE ERRORS
If the unit detects a problem , one or more of the followin g messages will appear on the display.
The explana tions given in the [ ] are for servicemen only.
DISPLAY MESSAGECAUSE AND REMEDY
·
Polygon motor error.
Refer to CALL SERVICE TROUBLESHOOTING GUIDE (P.92).
·
Laser beam error. Replace LSU unit.
Refer to CALL SERVICE TROUBLESHOOTING GUIDE (P.92).
·
Fuser unit cannot heat up. Replace fuser unit.
Refer to CALL SERVICE TROUBLESHOOTING GUIDE (P.92).
·
Fan motor error. Replace fan motor.
Refer to CALL SERVICE TROUBLESHOOTING GUIDE (P.92).
·
The shipping lock is locked. Unlock the shipping lock. If the display messages still remain after unlocking,
there is something wrong with the carriage sensor. Contact our service personnel.
·
There is something wrong with the drum unit. Replace the drum unit and the toner cartridge.
·
The ADF cable is not connected correctly. Check the connection.
·
The document is not fed into the unit properly. Reinsert the document. If misfeeding occurs frequently,
clean the document feeder rollers and try again.
·
The drum unit is not inserted properly. Reinsert it correctly.
·
The installed drum is worn out. Replace the drum unit with a new one.
·
The memory (telephone numbers, parameters, etc.) has been erased. Re-program.
[The backup lithium battery on the top of the digital board may be low or dead, so check it.]
·
The printer cover is open. Close it.
·
You tried to change the cable type setting (feature #15), while the fax machine has a document in
memory. Finish sending faxes, print out the document in memory or cancel the delayed transmission
(feature #25) and try again.
·
The printer cover (ADF cover) is open. Close it.
·
There is no space to store new entries in navigator directory. Erase unnecessary entries.
·
Recording paper was not fed into the unit properly. Reinsert the recording paper.
·
The unit has a document in memory. See the other displayed message instructions to print out the
document.
·
Memory is full of received documents due to lack of recording paper or a recording paper jam, etc. Install
paper or clear the jammed paper.
·
W hen performing memory transmission, the document being stored exceeds the memory capacity of the
unit. Transmit the entire document manually.
·
You cannot change the cable the type setting (feature #15) while using the handset or the monitor. Hang
up and try again.
·
W hen making a copy, the document being stored exceeds the memory capacity of the unit. Press STOPto clear the message. Divide the document into sections.
·
There is something wrong with the modem circuit.
·
The other party ´s fax machine is busy or has run out of recording paper. Try again.
·
Recording paper is not installed or the unit has run out of paper. Install paper.
·
Recording paper is not fed into the unit properly. Reinstall paper.
·
A recording paper jam occurred. Clear the jammed paper.
[If the printout jams, please refer to RECORDING PAPER JAMS(P.37).]
·
The cable or the PC power cord is not connected correctly. Check the connections.
·
The software is not running on the PC. Restart the software and try again.
69
KX-FLB75 8RU
Downloaded From ManualsPrinter.com Manuals
DISPLAY MESSAGECAUSE AND REMEDY
·
The unit is warming up. W ait for a while.
·
The other party ´s fax machine is busy or has run out of recording paper. Try again.
·
The document is jammed. Remove the jammed document.
·
Attempted to transmit a document longer than 600 mm (23 5/8”). Press the STOP
to remove the
document. Divide the document into two or more sheets and try again.
·
[Alternately, turn off service code #559 to enable sending of documents longer than 600 mm] (Refer to
DOCUMENT JAMS (P.36).)
·
The toner cartridge is empty. Replace the toner cartridge.
·
The remaining toner is low. Replace the toner cartridge and as soon as possible. W e recommend you
replace the drum unit every third time you replace the toner cartridge. To check the drum life and quality,
please print the printer test list. (Refer to TEST FUNCTIONS(P.74).)
·
A transmission error occurred. Try again.
·
The unit print on paper which is shorter then letter size paper.
To prevent the drum unit becoming dirty, use A4 or letter size paper.
70
KX-FLB75 8RU
Downloaded From ManualsPrinter.com Manuals