Panasonic KX FLB758RU User Manual
Have a look at the manual Panasonic KX FLB758RU User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 120
For the receiving problem , we have thought of causes other than in the software. Some causes may be when the fax changes
to the memory receiving mode (for example, when out of paper). and the memory becomes full of the unprinted fax data. In this
case, [MEMORY FULL] and its main cause (for example,“OUT OF PAPER ”) are displayed on the LCD. Accordingly, by solving
the main problem , [MEMORY FULL] can be cancele d and the receiving problem can solved. The causes of the display errors
are shown below....](http://img.usermanuals.tech/thumb/58/37633/w64_Panasonic_KX-FLB758RU-119.png "Page 120
For the receiving problem , we have thought of causes other than in the software. Some causes may be when the fax changes
to the memory receiving mode (for example, when out of paper). and the memory becomes full of the unprinted fax data. In this
case, [MEMORY FULL] and its main cause (for example,“OUT OF PAPER ”) are displayed on the LCD. Accordingly, by solving
the main problem , [MEMORY FULL] can be cancele d and the receiving problem can solved. The causes of the display errors
are shown below....")
6.5.11. SPECIAL SERVICE JOURNAL REPORTS Journal 2 and Journal 3 shown below, which are special journals giving the addition al detailed information about the latest 35 communication s, can be printed by Service Code 881 or 882. Remote printing function for the journal reports (JOURNAL, JOURNAL 2 and JOURNAL 3) is also available for service technicians. (Refer toPROGRAM MODE TABLE(P.78).) The JOURNAL report only gives you basic information about a communication , but the other two journal reports provide differen t information on the same item (communicatio n). HOW TO READ JOURNAL REPORTS: Example: 1. Look at NO. 01in the JOURNAL. If you want to know about the details about that item, see NO. 01in the JOURNAL 2 and the JOURNAL 3. You can get the followin g information. * MODE: Fax transmission * RCV. MODE: TEL * TX SPEED : 9.6 kbps * RESOLUTION: standard * ENCODE: MH * MAKER CODE: 79 2. Look at NO. 04in the JOURNAL 2. CNG (0003) indicate s that the CNG signal has been received three times since the purchase date. For further details, see JOURNAL 2andJOURNAL 3 . 121 KX-FLB75 8RU Downloaded From ManualsPrinter.com Manuals
6.5.11.1. JOURNAL 2 Refer to JOURNAL 2 inPRINTOUT EXAMPLE(P.123). Journal 2 displays the addition al detailed information about the last 35 communication s. Descriptions: (1) RCV. MODE Indicates which receive mode the unit was in when the unit received a fax message. This information is also displayed when the unit transmitted a fax message. (2) SPEED Indicates the speed of the communication . If multiple pages are transmitted or received, it indicate s the last page ’s communication speed. If there is a communication error, “? ” is displayed. (3) RESOLUTION Indicates the resolution of the communication . If multiple pages are transmitted or received, it indicate s the last page ’s resolution. If there is a communication error, “? ” is displayed. (4) RCV-TRIG. (CNT.) Indicates the trigger that causes the unit to switch to the fax receive mode. The available options are listed in JOURNAL 2 in PRINTOUT EXAMPLE (P.123). The values in parentheses indicate how many times the trigger has been used. (For example, “ 0003” means three times.) No.DisplayFunction 1FAX MODEMeans the unit received a fax message in the FAX mode. 2MAN RCVMeans the unit received a fax message by manual operation. 3RMT DTMFMeans the unit detected DTMF (Remote Fax activation code) entered remotely. 4PAL DTMFMeans the unit detected DTMF (Remote Fax activation code) entered by a parallel connected telephone. 5TURN-ONMeans the unit started to receive after 10 rings. (Remote Turn On: Service Code #573) (5) ERROR → →→ → MEMORY Indicates the reason why the unit received a fax message in memory. If you look at No.11 in the JOURNAL 2 in PRINTOUT EXAMPLE(P.123), it shows the fax message was received in memory due to “PAPER OUT ”error. NO RESPO NSE DISAPPEARE D ON JOURNAL The “NO RESPO NSE DISAPPEARE D ON JOURNAL ”displays the information about the last 10 communication s terminated by “No Respon se ”. (Some of the communication s terminated by “No Respon se ”were not displayed in the JOURNAL.) W hen a fax transmission cannot be performed because the other party ’s unit is set to the TEL mode, “No response ”will be printed. 122 KX-FLB75 8RU Downloaded From ManualsPrinter.com Manuals
Refer to JOURNAL 3 inPRINTOUT EXAMPLE(P.123). (6) ENCODE Compression Code: MH/MR/MMR (7) MSLT MSLT means Minimum Scan Line Time. Used only at the factory. (8) EQM EQM means Eye Quality Monitor. Used only at the factory. (9) ERROR LINE (RX) W hen an error occurs while receiving a fax, this shows the number of error lines. (10) MAKER CODE This shows a 2 digit code of the other party ´sfax machine brand. 0E: “KX” model 00: Unknown 79: “UF ”model 19: “Xerox ”model 6.5.11.2. JOURNAL 3 Description 6.5.11.3. PRINTOUT EXAMPLE 123 KX-FLB75 8RU Downloaded From ManualsPrinter.com Manuals
124 KX-FLB75 8RU Downloaded From ManualsPrinter.com Manuals
Error code table: 6.5.11.4. HOW TO OUTPUT THE JOURNAL REPORT 1. Press the MENU button. 2. Press“# ”, then “8 ” and “3 ”. 3. Press the START /COPY/SET button. 4. The report prints out. CROSS REFER ENCE: FEATURES (P.12) (1) CODE(2) RESULT(3) MODESYMPTOMCounter- measure* PRESSED THE STOP KEYSND & RCVCommunication was interrupted by the STOP button. DOCUMENT JAMMEDSNDThe document paper is jammed. NO DOCUMENTSNDNo document paper. THE COVER W AS OPENEDSND & RCVThe cover is open. 28COMMUNICATION ERRORSND & RCV 40COMMUNICATION ERRORSNDTransmission is finished when the T1 TIMER expires.1 41COMMUNICATION ERRORSNDDCN is received after DCS transmission.2 42COMMUNICATION ERRORSNDFTT is received after transmission of a 2400BSP training signal.3 43COMMUNICATION ERRORSNDNo response after post message is transmitted three times.4 44COMMUNICATION ERRORSNDRTN and PIN are received.5 46COMMUNICATION ERRORRCVNo response after FTT is transmitted.6 48COMMUNICATION ERRORRCVNo post message.7 49COMMUNICATION ERRORRCVRTN is transmitted.8 50COMMUNICATION ERRORRCVPIN is transmitted (to PRI-Q).8 51COMMUNICATION ERRORRCVPIN is transmitted.8 52COMMUNICATION ERRORRCVReception is finished when the T1 TIMER expires.9 54ERROR-NOT YOUR UNITRCVDCN is received after DIS transmission.11 58COMMUNICATION ERRORRCVDCN is received after FTT transmission.13 59ERROR-NOT YOUR UNITSNDDCN responds to the post message.14 64COMMUNICATION ERRORPOL. RXPolling is not possible.15 65COMMUNICATION ERRORSNDDCN is received before DIS reception.2 65COMMUNICATION ERRORRCVReception is not EOP, EOM PIP, PIN, RTP or RTN.2 68COMMUNICATION ERRORRCVNo response at the other party after MCF or CFR is transmitted.13 70ERROR-NOT YOUR UNITRCVDCN is received after CFR transmission.13 72COMMUNICATION ERRORRCVCarrier is cut when the image signal is received.16 75MEMORY FULLRCVThe document was not received due to memory full. 79CANCELEDSNDThe multi-station transmission was rejected by the user. FFCOMMUNICATION ERRORSND & RCVModem error. For the DCN, DCN, etc. abbreviations, refer to MODEM SECTION (P.221).12 SND=T RANSMISSION / RCV=RECEPT ION Most fax communication problem s can be resolved by the followin g steps. 1. Change the transmit level. (Service code: 596, refer to SERVICE FUNCTION TABLE(P.72).) 2. Change the TX speed/RX speed. (Service code: 717/718, refer to SERVICE FUNCTION TABLE(P.72).) 125 KX-FLB75 8RU Downloaded From ManualsPrinter.com Manuals
Note*:If the problem remains, see the followin g “Countermeasu re ”flow chart. 126 KX-FLB75 8RU Downloaded From ManualsPrinter.com Manuals
CROSS REFER ENCE:TEST FUNCTIONS (P.74) 127 KX-FLB75 8RU Downloaded From ManualsPrinter.com Manuals
CROSS REFER ENCE:TEST FUNCTIONS (P.74) 128 KX-FLB75 8RU Downloaded From ManualsPrinter.com Manuals
CROSS REFER ENCE:TEST FUNCTIONS (P.74) 129 KX-FLB75 8RU Downloaded From ManualsPrinter.com Manuals
CROSS REFER ENCE:TEST FUNCTIONS (P.74) 130 KX-FLB75 8RU Downloaded From ManualsPrinter.com Manuals