Panasonic KX FLB758RU User Manual

							CROSS REFER ENCE:MOTOR SECTION (P.144)
111
KX-FLB75 8RU
Downloaded From ManualsPrinter.com Manuals 
						

							6.5.9.2.1. ADF 6.5.9.2. SKEW
112
KX-FLB75 8RU
Downloaded From ManualsPrinter.com Manuals 
						

							6.5.9.2.2. SCANNE R GLASS
6.5.9.3. THE SENT FAX DATA IS SKEWED
CROSS REFER ENCE:SKEW (P.112)
6.5.9.4. THE RECEIVED FAX DATA IS SKEWED
CROSS REFER ENCE:
SKEW (P.106)
113
KX-FLB75 8RU
Downloaded From ManualsPrinter.com Manuals 
						

							6.5.9.5. THE RECEIVED OR COPIED DATA IS EXPANDED
6.5.9.6. BLACK OR WHITE VERTICAL LINE IS COPIED
114
KX-FLB75 8RU
Downloaded From ManualsPrinter.com Manuals 
						

							6.5.9.7. AN ABNORMAL IMAGE IS COPIED
CROSS REFER ENCE:CIS (Contact Image Sensor) SECTION (P.148)
115
KX-FLB75 8RU
Downloaded From ManualsPrinter.com Manuals 
						

							6.5.10. COMMUNICATION SECTION
Find the problem in the table shown below, and refer to the corresponding troubleshootin g procedure inDEFECTIVE
FACSIMILE SECTION (P.117).
No.SymptomContentPossible cause
1The paper dose not feed properly when faxing.
(Copying is also not possible.)TroubleshootingProblem with the feeding
mechanism.
(Refer toTRANSMIT PROBLEM
(P.117).)
2The fax transmits successfully one time and fails another.
(Copying is also possible.)TroubleshootingProblem with the service line or with
the receiver ´sfax.
(Refer to SOMETIME THERE IS A
TRANSMIT PROBLEM (P.118).)
3The fax receives successfully one time and fails another.
(Copying is also possible.)TroubleshootingProblem with the service line or with
the transmitter´sfax.
(Refer to RECEIVE PROBLEM
(P.119).)
4The fax completely fails to transmit or receive.
(Copying is also possible.)TroubleshootingProblem with the electric circuit.
(Refer to THE UNIT CAN COPY,
BUT CANNOT
TRANSMIT/RECEIVE (P.120).)
5The fax fails either to transmit or receive when making a
long distance or an international call.
(Copying is also possible.)Detailed description of the
possible causes (Similar to
troubleshooting items No.2
and No.3.)Problem with the service line.
6The fax image is poor when transmitting or receiving
during a long distance or international call.
7No.1-No.5The troubleshooting
procedure for each error
code will be printed on the
communication result
report.(Refer toHOW TO OUTPUT THE
JOURNAL REPORT (P.125).)
116
KX-FLB75 8RU
Downloaded From ManualsPrinter.com Manuals 
						

							6.5.10.1. DEFECTIVE FACSIMILE SECTION
6.5.10.1.1. TRANSMIT PROBLEM
CROSS REFER ENCE:WHITE PLATE AND SCANNER GLASS (P.33)
ADF (Auto document feed) SECTION (P.110)
OPERATION PANEL SECTION (P.140)
117
KX-FLB75 8RU
Downloaded From ManualsPrinter.com Manuals 
						

							6.5.10.1.2. SOMETIME THERE IS A TRANSMIT PROBLEM
Note:“596: Transmit level set ”represents a service code. Refer to the SERVICE FUNCTION TABLE(P.72).
“ 717: Transmit speed select ”represents a service code. Refer to the SERVICE FUNCTION TABLE(P.72).
118
KX-FLB75 8RU
Downloaded From ManualsPrinter.com Manuals 
						

							6.5.10.1.3. RECEIVE PROBLEM
Confirm the followin g before starting troubleshootin g. 
     · 
  
  Is the recording paper installed properly? Refer to the next page.
Note:
“596: Transmit level set ”represents a service code. Refer to the SERVICE FUNCTION TABLE(P.72).
“ 718: Receive speec select ”represents a service code. Refer to the SERVICE FUNCTION TABLE(P.72).
119
KX-FLB75 8RU
Downloaded From ManualsPrinter.com Manuals 
						

							For the receiving problem , we have thought of causes other than in the software. Some causes may be when the fax changes
to the memory receiving mode (for example, when out of paper). and the memory becomes full of the unprinted fax data. In this
case, [MEMORY FULL] and its main cause (for example,“OUT OF PAPER ”) are displayed on the LCD. Accordingly, by solving
the main problem , [MEMORY FULL] can be cancele d and the receiving problem can solved. The causes of the display errors
are shown below.
MODEM ERRORFAX IN MEMORYPLEASE W AIT
CHANGE DRUMFAXMEMORYFULLREDIAL TIME OUT
CHECK ADF CABLELINE IN USEREMOVE DOCUMENT
CHECK DOCUMENTMEMORY FULLTONER EMPTY
COVER OPENMODEM ERRORTONER LOW
DATA IN MEMORYNO FAX REPLYTRANSMIT ERROR
CLOSE ADF COVEROUT OF PAPERW RONG PAPER
DIRECTORY FULLPAPER JAMMEDCARRIAGE ERROR
FAILED PICK UPPC FAIL OR BUSY
Please refer to USER RECOVERABL E ERRORS (P.69) for the above items.
Also, when it actually becomes a hardware deformity, please check each sensor.
6.5.10.1.4. THE UNIT CAN COPY, BUT CANNOT TRANSMIT/RECEIVE
CROSS REFER ENCE: TEST FUNCTIONS (P.74)
120
KX-FLB75 8RU
Downloaded From ManualsPrinter.com Manuals