Panasonic Kx Fl611 Operating Instruction Manual

							8. Help
69
For Fax Advantage assistance, call 1-800-435-7329. Note:
LDo not touch the transfer roller (1).
1
FL611-PFQX2072ZA-en.book  Page 69  Thursday, December 21, 2006  11:10 AM 
						

							9. Caller IQ Feature
70
For assistance, please call openLCR: 1-866-openLCR (1-866-673-6527)
9 Caller IQ Feature
9For a ssistan ce, plea se call open LCR: 1-866 -o penL CR (1-866-673 -6 527)
Caller IQ Feature
9.1 openLCR service for 
the Caller IQ feature
This unit is compatible with service provided by 
openLCR.
LIf you have any questions regarding the 
openLCR service, visit 
www.openLCR.com or call openLCR at 1-
866-openLCR (1-866-6736527).
LNEITHER PANASONIC 
COMMUNICATIONS CO., LTD. NOR 
PANASONIC CORPORATION OF NORTH 
AMERICA IS IN ANY WAY AFFILIATED 
WITH, OR RESPONSIBLE FOR THE ACTS 
OR OMISSIONS OF, OPENLCR.COM, INC. 
NEITHER PANASONIC 
COMMUNICATIONS CO., LTD. NOR 
PANASONIC CORPORATION OF NORTH 
AMERICA NOR ANY OF THEIR 
EMPLOYEES OR AFFILIATES OR 
CUSTOMERS MAKE ANY WARRANTIES 
OR REPRESENTATIONS, EITHER 
EXPRESS OR IMPLIED, TO ANY 
CUSTOMER OR ANY OTHER THIRD 
PARTY WITH RESPECT TO ANY OF THE 
SERVICES PROVIDED BY 
OPENLCR.COM, INC., NOR ASSUME NOR 
CREATE ANY OTHER OBLIGATION OF 
ANY KIND ON BEHALF OF 
OPENLCR.COM, INC.
LThe Caller IQ service can only be activated 
after registering with openLCR at 
www.openLCR.com. More information 
regarding the openLCR service is available 
on the Internet at www.openLCR.com.
If you do not wish to use the Caller IQ feature, 
you can turn it OFF temporarily.
Note:
LBefore subscribing to openLCR service, you 
cannot change the following settings.
9.2 To turn the Caller IQ 
ON / OFF
1Press {CALLER IQ}.
2Press {0}.
3To  t u r n  O N :
Press {1}.
To  t u r n  O F F :
Press {3}.
4Press {SET}.
LWhen the Caller IQ feature is turned ON, 
the CALLER IQ indicator will turn ON.
LWhen the Caller IQ feature is turned OFF, 
the CALLER IQ indicator will turn OFF.
9.3 Updating the rate table 
(downloading the rate 
table)
If you register through the openLCR web site or 
move to another area, you have to download the 
rate table manually.
LKeep the front cover page open for button 
locations.
1Press {CALLER IQ}.
2Press {#}.
3Press {SET}.
4Follow the voice prompt to start 
downloading.
{SET}
FLASH/LIGHT/OFF
FL611-PFQX2072ZA-en.book  Page 70  Thursday, December 21, 2006  11:10 AM 
						

							9. Caller IQ Feature
71
For assistance, please call openLCR: 1-866-openLCR (1-866-673-6527)
During download
LThe CALLER IQ indicator will flash and the 
display will show the following.
DOWNLOADING
LWhile downloading, you cannot do other 
operations such as making/answering calls 
or sending/receiving documents.
LDepending on where you live, the call for 
downloading may be a long distance call and 
will take about 1-2 minutes. You will be 
charged for the cost of the call.
LWhen the download is completed, the 
CALLER IQ indicator will stop flashing but will 
remain lit up and the display will show 
“DOWNLOAD OK!”
LIf “DOWNLOAD ERROR. TRY AGAIN.” is 
displayed, the unit was unable to download 
from openLCR.
Try downloading manually again.
Automatic download
The fax machine will automatically download the 
latest rate table when:
– the rate table in the fax machine reaches the 
expiry date; usually between 60-90 days after 
last update,
– the fax machine is being polled by openLCR 
service center.
To stop downloading
1.Press {STOP}.
2.Press {SET}.
9.4 Downloading 
information
This enables you to view information such as 
weather, lottery results and stock quotes on the 
LCD display. Each time you download the data 
from openLCR, the information will be updated. 
To view up-to-date information, you will need to 
download the information to your unit.
If you access the openLCR web site at 
www.openLCR.com and program the system 
setup and phone book, you will need to 
download this data to the fax machine.
LKeep the front cover page open for button 
locations.
1Press {CALLER IQ}.
2Press {#}.
3Press {SET}.
4Follow the voice prompt to start 
downloading.
9.5 Viewing information
LKeep the front cover page open for button 
locations.
1Press {CALLER IQ}.
2Press {2}.
3Press {SET}.
LThe items of information which you 
selected on the web are displayed.
Example:openLCR.com
1: Weather
b
2: Stock
4Select the desired information by pressing 
the desired information number, using the 
dial keypad.
5Press {A} or {B} repeatedly to find more 
information.
6Press {CALLER IQ} to stop viewing.
9.6 Printing information
LKeep the front cover page open for button 
locations.
1Press {CALLER IQ}.
2Press {1}.
3Press {SET} to start printing.
FL611-PFQX2072ZA-en.book  Page 71  Thursday, December 21, 2006  11:10 AM 
						

							10. General Information
72
10 General Information Printed Repo rts
10.1 Reference lists and 
reports
You can print out the following lists and reports 
for your reference.
Setup list:
provides you with the current settings of the 
basic and advanced programming features 
(page 49 to page 51).
Telephone number list:
provides you with names and numbers which are 
stored in the one-touch dial feature and 
navigator directory.
Journal report:
keeps records of fax transmission and reception. 
This report can be printed automatically after 
every 30 fax communications (feature #22 on 
page 50).
Broadcast programming list:
provides you with names and numbers which are 
stored in the broadcast memory (page 39).
Printer test:
allows you to check the print quality of your unit. 
If the test print has a dirty pattern, or blurred 
points or lines, clean the inside of the unit (page 
67). If printing quality is still poor, replace the 
toner cartridge and drum unit.
1Press {MENU} repeatedly to display “PRINT 
REPORT”.
2Press {} repeatedly to display the 
desired item.
3Press {SET} to start printing.
LTo stop printing, press {STOP}.
4Press {MENU}.
{SET} {STOP} {MENU}
{}
FL611-PFQX2072ZA-en.book  Page 72  Thursday, December 21, 2006  11:10 AM 
						

							10. General Information
73
Specifications
10.2 Specifications
Applicable lines:
Public Switched Telephone Network
Document size:
Max. 216 mm (8
1/2) in width, Max. 600 mm 
(235/8) in length
Effective scanning width:
208 mm (8
3/16)
Effective printing width:
Letter/Legal: 208 mm (8
3/16)
A4: 202 mm (715/16)
Transmission time
*1:
Approx. 8 s/page (ECM-MMR)*2
Scanning density:
Horizontal: 8 pels/mm (203 pels/inch)
Vertical: 3.85 lines/mm (98 lines/inch) – in 
standard resolution,
7.7 lines/mm (196 lines/inch) – in 
fine/photo/photo with text resolution,
15.4 lines/mm (392 lines/inch) – in super fine 
resolution
Photo resolution:
64-level
Scanner type:
Contact Image Sensor
Printer type:
Laser Printer
Data compression system:
Modified Huffman (MH), Modified READ (MR), 
Modified Modified READ (MMR)
Modem speed:
14,400 / 12,000 / 9,600 / 7,200 / 4,800 / 2,400 
bps; Automatic Fallback
Operating environment:
10 °C – 32.5 °C (50 °F – 90.5 °F), 20 % – 80 % 
RH (Relative Humidity)
Dimensions:
Approx. height 370 mm × width 430 mm × depth 
480 mm (14
9/16 × 1615/16 × 187/8)
Mass (Weight):
Approx. 9.2 kg (20.2 lb.)
Power consumption:
Standby: Approx. 3 W
Transmission: Approx. 11 W
Reception: Approx. 290 W
Copy: Approx. 290 W
Maximum: Approx. 900 W (When the fuser lamp 
turns on)
Power supply:
120 V AC, 60 HzFax memory capacity:
Approx. 120 pages of memory transmission
Approx. 170 pages of memory reception 
(Based on the ITU-T No. 1 Test Chart in standard 
resolution.)
Laser diode properties:
Laser output: Max. 5 mW
Wave length: 760 nm – 800 nm
Emission duration: Continuous
Print speed:
Approx. 14 ppm (pages per minute)
Printing resolution:
600 × 600 dpi
*1 Transmission speed depends upon the 
contents of the pages, resolution, telephone 
line conditions and capability of the other 
party’s machine.
*2 Transmission speed is based upon the ITU-T 
No. 1 Test Chart. If the capability of the other 
party’s machine is inferior to your unit, the 
transmission time may be longer.
ITU-T No.1 Test Chart
FL611-PFQX2072ZA-en.book  Page 73  Thursday, December 21, 2006  11:10 AM 
						

							10. General Information
74
Recording paper specifications
Recording paper size:
Letter: 216 mm × 279 mm (81/2 × 11)
Legal: 216mm × 356 mm (81/2 × 14)
A4: 210 mm × 297 mm (81/4 × 1111/16)
Recording paper weight:
60 g/m
2 to 90 g/m2 (16 lb. to 24 lb.)
Note for recording paper:
LDo not use the following types of paper:
– Paper with a cotton and/or fiber content 
that is over 20 %, such as letterhead 
paper or paper used for resumes
– Extremely smooth or shiny paper, or 
paper that is highly textured
– Coated, damaged or wrinkled paper
– Paper with foreign objects attached, such 
as tabs or staples
– Paper which has dust, lint or oil stains
– Paper that will melt, vaporize, discolor, 
scorch or emit dangerous fumes near 
200°C (392 °F), such as vellum paper. 
These materials may transfer onto the 
fusing roller and cause damage.
– Moist paper
– Inkjet paper
LSome paper only accepts print on one side. 
Try using the other side of the paper if you are 
not happy with the print quality or if 
misfeeding occurs.
LFor proper paper feeding and best print 
quality, we recommend using long-grained 
paper.
LDo not use paper of different types or 
thickness at the same time. This may cause a 
paper jam.
LAvoid double-sided printing.
LDo not use paper printed from this unit for 
double-sided printing with other copiers or 
printers. This may cause a paper jam.
LTo avoid curling, do not open paper packs 
until you are ready to use the paper. Store 
unused paper in the original packaging, in a 
cool and dry location.
Toner life 
Toner life depends on the amount of content in a 
received, copied or printed document. The 
following is the approximate relationship 
between image area and toner life for 
replacement toner cartridge (Model No. KX-
FA83). Toner life varies in actual usage.
5 % image area
Approx. 2,500 sheets of letter size paper can be 
printed.
10 % image area
Approx. 1,200 sheets of letter size paper can be 
printed.
15 % image area
Approx. 800 sheets of letter size paper can be 
printed.
FL611-PFQX2072ZA-en.book  Page 74  Thursday, December 21, 2006  11:10 AM 
						

							10. General Information
75
Note:
LThe image area changes with the depth, 
thickness and size of the characters.
LIf you turn on the toner save feature, the toner 
cartridge will last approx. 40% longer.
Drum life
The included drum unit or Model No. KX-FA84 
can print approx. 10,000 letter-sized sheets at 20 
sheets per print job, and approx. 5,000 letter-
sized sheets at 1 sheet per print job regardless 
of the content of the image area. The actual 
drum life is determined by various factors, such 
as temperature, humidity and type of paper, etc.
Note:
LDesign and specifications are subject to 
change without notice.
LThe pictures and illustrations in these 
instructions may vary slightly from the actual 
product.
FL611-PFQX2072ZA-en.book  Page 75  Thursday, December 21, 2006  11:10 AM 
						

							10. General Information
76
FCC and  Other In formatio n
10.3 FCC and Other Information
This equipment complies with Part 68 of the FCC 
rules and the requirements adopted by the ACTA. 
On the rear of this equipment is a label that 
contains, among other information, a product 
identifier in the format US:ACJ----------.
If requested, this number must be provided to the 
telephone company.
 Registration No .....(found on the rear of the unit)
 Ringer Equivalence No. (REN)
...............................(found on the rear of the unit)
A plug and jack used to connect this equipment to 
the premises wiring and telephone network must 
comply with the applicable FCC Part 68 rules and 
requirements adopted by the ACTA. A compliant 
telephone cord and modular plug is provided with 
this product. It is designed to be connected to a 
compatible modular jack that is also compliant.
The REN is used to determine the number of 
devices that may be connected to a telephone line. 
Excessive RENs on a telephone line may result in 
the devices not ringing in response to an incoming 
call. In most but not all areas, the sum of RENs 
should not exceed five (5.0).To be certain of the 
number of devices that may be connected to a 
line, as determined by the total RENs, contact the 
local telephone company. For products approved 
after July 23,2001,the REN for this product is part 
of the product identifier that has the format 
US:AAAEQ##TXXXX. The digits represented by 
## are the REN without a decimal point (e.g.,03 is 
a REN of 0.3).
If this equipment causes harm to the telephone 
network, the telephone company will notify you in 
advance that temporary discontinuance of service 
may be required. But if advance notice isnt 
practical, the telephone company will notify the 
customer as soon as possible. Also, you will be 
advised of your right to file a complaint with the 
FCC if you believe it is necessary.
The telephone company may make changes in its 
facilities, equipment, operations or procedures that 
could affect the operation of the equipment. If this 
happens the telephone company will provide 
advance notice in order for you to make necessary 
modifications to maintain uninterrupted service.
If trouble is experienced with this equipment, for 
repair or warranty information, please contact a 
Factory Servicenter or other Authorized Servicer. If 
the equipment is causing harm to the telephone 
network, the telephone company may request that 
you disconnect the equipment until the problem is 
resolved.Connection to party line service is subject to state 
tariffs. Contact the state public utility commission, 
public service commission or corporation 
commission for information.
If your home has specially wired alarm equipment 
connected to the telephone line, ensure the 
installation of this equipment does not disable your 
alarm equipment. If you have questions about 
what will disable alarm equipment, consult your 
telephone company or a qualified installer.
This equipment is hearing aid compatible as 
defined by the FCC in 47 CFR Section 68.316.
WHEN PROGRAMMING EMERGENCY 
NUMBERS AND(OR) MAKING TEST CALLS TO 
EMERGENCY NUMBERS:
1) Remain on the line and briefly explain to the 
dispatcher the reason for the call.
2) Perform such activities in the off-peak hours, 
such as early morning or late evenings.
The software contained in this equipment to allow 
user access to the network must be upgraded to 
recognize newly established network area codes 
and exchange codes as they are placed into 
service. Failure to upgrade the premises systems 
or peripheral equipment to recognize the new 
codes as they are established will restrict the 
customer and the customers employees from 
gaining access to the network and to these codes.
CAUTION:
Any changes or modifications not expressly 
approved by the party responsible for compliance 
could void the user’s authority to operate this 
device.
NOTE:
This equipment has been tested and found to 
comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. These limits 
are designed to provide reasonable protection 
against harmful interference in a residential 
installation. This equipment generates, uses, and 
can radiate radio frequency energy and, if not 
installed and used in accordance with the 
instructions, may cause harmful interference to 
radio communications. However, there is no 
guarantee that interference will not occur in a 
particular installation. If this equipment does cause 
harmful interference to radio or television 
reception, which can be determined by turning the 
equipment off and on, the user is encouraged to 
try to correct the interference by one or more of 
the following measures:
FL611-PFQX2072ZA-en.book  Page 76  Thursday, December 21, 2006  11:10 AM 
						

							10. General Information
77
— Reorient or relocate the receiving antenna.
— Increase the separation between the 
equipment and receiver.
— Connect the equipment into an outlet on a 
circuit different from that to which the receiver 
is connected.
— Consult the dealer or an experienced radio/TV 
technician for help.
FL611-PFQX2072ZA-en.book  Page 77  Thursday, December 21, 2006  11:10 AM 
						

							10. General Information
78
Limite d Wa rranty
10.4 Limited Warranty
PANASONIC CONSUMER ELECTRONICS COMPANY, 
DIVISION OF PANASONIC CORPORATION OF 
NORTH AMERICA
One Panasonic Way, Secaucus, New Jersey 07094PANASONIC PUERTO RICO, INC. 
San Gabriel Industrial Park,
Ave. 65 de Infantería, Km. 9.5,
Carolina, Puerto Rico 00985
Panasonic Facsimile Product 
Limited Warranty
Limited Warranty  Coverage
If your product does not work properly because of a defect in materials or workmanship, Panasonic 
Consumer Electronics Company or Panasonic Puerto Rico, Inc. (collectively referred to as “the warrantor”) 
will, for the length of the period indicated on the chart below, which starts with the date of original purchase 
(“Limited Warranty period”), at its option either (a) repair your product with new or refurbished parts, or (b) 
replace it with a new or a refurbished product. The decision to repair or replace will be made by the 
warrantor.
Batteries, antennas, ink film, toner cartridge, drum unit, and ink cartridge (as may be applicable), and 
cosmetic parts (cabinet) are not warranted under this Limited Warranty.
 
During the “Labor” Limited Warranty period there will be no charge for labor.  During the “Parts” Limited 
Warranty period, there will be no charge for parts.  You must carry-in or mail-in your product during the 
Limited Warranty period.  This Limited Warranty only applies to products purchased and serviced in the 
United States or Puerto Rico. This Limited Warranty is extended only to the original purchaser and only 
covers products purchased as new.  A purchase receipt or other proof of the original purchase date is 
required for Limited Warranty service.
Carry-In or Mail-In Service
For Carry-In or Mail-In Service in the United States call 1-800-HELP-FAX (1-800-435-7329)
For assistance in Puerto Rico call Panasonic Puerto Rico, Inc. (787)-750-4300 or fax (787)-768-2910.  
Limited Warranty Limits And Exclusions
This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT 
COVER normal wear and tear or cosmetic damage.  The Limited Warranty ALSO DOES NOT COVER 
damages which occurred in shipment, or failures which are caused by products not supplied by the 
warrantor such as non Panasonic ink film, toner cartridge or drum unit, or failures which result from 
accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up 
adjustments, signal reception problems, misadjustment of consumer controls, improper maintenance, 
power line surge, improper voltage supply, lightning damage, modification, or commercial use (such as in a 
hotel, office, restaurant, or other business), rental use of the product,  service by anyone other than a 
Factory Servicenter or other Authorized Servicer, or damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY 
COVERAGE”.  THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL 
DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF 
THIS LIMITED WARRANTY.  (As examples, this excludes damages for lost time, cost of having someone 
remove or re-install an installed unit if applicable, or travel to and from the servicer. The items listed are not 
exclusive, but are for illustration only.)  ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE 
WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.
FAX categories Parts Labor
Laser Facsimile Thermal Transfer Facsimile 6 Months
1 (one) Year6 Months
1 (one) Year
FL611-PFQX2072ZA-en.book  Page 78  Thursday, December 21, 2006  11:10 AM