Panasonic Hdc Z10000 Owners Manual
Here you can view all the pages of manual Panasonic Hdc Z10000 Owners Manual. The Panasonic manuals for Camcorder are available online for free. You can easily download all the documents as PDF.
Page 71
![Page 71
71VQT3U98
The White Balance can be changed to ATW Lock. (l52)
≥ It will return to ATW when canceled.
≥This cannot be set when the White Balance is set to anything other than ATW.
The in-focus area is displayed in red.
≥ The red display does not appear on the images actually recorded.
≥ The red display does not appear on TV.
Press USER button or touch USER button icon in the recording screen.
≥ Set [3D/2D REC MODE] to [2D]. ( l36)
≥ The zoom magnification will change every time the button is pressed or...](http://img.usermanuals.tech/thumb/58/64195/w300_hdc-z10000_en_om_d-70.png "Page 71
71VQT3U98
The White Balance can be changed to ATW Lock. (l52)
≥ It will return to ATW when canceled.
≥This cannot be set when the White Balance is set to anything other than ATW.
The in-focus area is displayed in red.
≥ The red display does not appear on the images actually recorded.
≥ The red display does not appear on TV.
Press USER button or touch USER button icon in the recording screen.
≥ Set [3D/2D REC MODE] to [2D]. ( l36)
≥ The zoom magnification will change every time the button is pressed or...")
71VQT3U98 The White Balance can be changed to ATW Lock. (l52) ≥ It will return to ATW when canceled. ≥This cannot be set when the White Balance is set to anything other than ATW. The in-focus area is displayed in red. ≥ The red display does not appear on the images actually recorded. ≥ The red display does not appear on TV. Press USER button or touch USER button icon in the recording screen. ≥ Set [3D/2D REC MODE] to [2D]. ( l36) ≥ The zoom magnification will change every time the button is pressed or...
Page 72
![Page 72
72VQT3U98
A graph with brightness as horizontal axis and number of pixels at that brightness as vertical
axis is displayed. It is possible to determine the exposure of the whole image by looking at
the distribution in the graph.
≥To adjust the brightness, refer to page 54.
Switches the display method of the 3D video.
≥ These settings will not affect the actual images recorded.
≥ Set [3D/2D REC MODE] to [3D]. ( l36)
Press USER button or touch USER button icon.
≥ It will switch every time the button is...](http://img.usermanuals.tech/thumb/58/64195/w300_hdc-z10000_en_om_d-71.png "Page 72
72VQT3U98
A graph with brightness as horizontal axis and number of pixels at that brightness as vertical
axis is displayed. It is possible to determine the exposure of the whole image by looking at
the distribution in the graph.
≥To adjust the brightness, refer to page 54.
Switches the display method of the 3D video.
≥ These settings will not affect the actual images recorded.
≥ Set [3D/2D REC MODE] to [3D]. ( l36)
Press USER button or touch USER button icon.
≥ It will switch every time the button is...")
72VQT3U98 A graph with brightness as horizontal axis and number of pixels at that brightness as vertical axis is displayed. It is possible to determine the exposure of the whole image by looking at the distribution in the graph. ≥To adjust the brightness, refer to page 54. Switches the display method of the 3D video. ≥ These settings will not affect the actual images recorded. ≥ Set [3D/2D REC MODE] to [3D]. ( l36) Press USER button or touch USER button icon. ≥ It will switch every time the button is...
Page 73
![Page 73
73VQT3U98
3D image can be recorded as close as approximately 45 cm (1.5 feet) to the subject when
the zoom magnification is set to 1k.
≥ Set [3D/2D REC MODE] to [3D]. ( l36)
≥ is displayed.
≥ Canceling returns the convergence point to the original position.
≥The setting is canceled in following cases:
jIf you adjust the CONV. dial ( l40)
j If you perform the convergence reset
The display of the convergence point goes to , and the convergence point is automatically
set to prevent 3D video that tires...](http://img.usermanuals.tech/thumb/58/64195/w300_hdc-z10000_en_om_d-72.png "Page 73
73VQT3U98
3D image can be recorded as close as approximately 45 cm (1.5 feet) to the subject when
the zoom magnification is set to 1k.
≥ Set [3D/2D REC MODE] to [3D]. ( l36)
≥ is displayed.
≥ Canceling returns the convergence point to the original position.
≥The setting is canceled in following cases:
jIf you adjust the CONV. dial ( l40)
j If you perform the convergence reset
The display of the convergence point goes to , and the convergence point is automatically
set to prevent 3D video that tires...")
73VQT3U98 3D image can be recorded as close as approximately 45 cm (1.5 feet) to the subject when the zoom magnification is set to 1k. ≥ Set [3D/2D REC MODE] to [3D]. ( l36) ≥ is displayed. ≥ Canceling returns the convergence point to the original position. ≥The setting is canceled in following cases: jIf you adjust the CONV. dial ( l40) j If you perform the convergence reset The display of the convergence point goes to , and the convergence point is automatically set to prevent 3D video that tires...
Page 74
![Page 74
74VQT3U98
The motion picture recorded last can be deleted.
Deleted scenes cannot be restored.
1 Press USER button or touch USER button icon in the recording screen.
2 Touch [YES].
≥It will return to recording screen without deleting by touching [NO].
≥Last Scene Delete is not possible in following cases:
jWhen power is turned on/off
j When the mode switch is operated
j When the setting of [3D/2D REC MODE] or [REC FORMAT] is changed
j When the SD Card is inserted/removed
j During the interval recording
It...](http://img.usermanuals.tech/thumb/58/64195/w300_hdc-z10000_en_om_d-73.png "Page 74
74VQT3U98
The motion picture recorded last can be deleted.
Deleted scenes cannot be restored.
1 Press USER button or touch USER button icon in the recording screen.
2 Touch [YES].
≥It will return to recording screen without deleting by touching [NO].
≥Last Scene Delete is not possible in following cases:
jWhen power is turned on/off
j When the mode switch is operated
j When the setting of [3D/2D REC MODE] or [REC FORMAT] is changed
j When the SD Card is inserted/removed
j During the interval recording
It...")
74VQT3U98 The motion picture recorded last can be deleted. Deleted scenes cannot be restored. 1 Press USER button or touch USER button icon in the recording screen. 2 Touch [YES]. ≥It will return to recording screen without deleting by touching [NO]. ≥Last Scene Delete is not possible in following cases: jWhen power is turned on/off j When the mode switch is operated j When the setting of [3D/2D REC MODE] or [REC FORMAT] is changed j When the SD Card is inserted/removed j During the interval recording It...
Page 75
75VQT3U98 Quick Start 1 Press and hold down the QUICK START button until the display on the LCD monitor/ viewfinder disappears. The quick start lamp E flashes green and the unit goes into Quick Start Standby Mode. 2 Press the QUICK START button.The quick start lamp E goes off and the unit is put into recording pause about 0.6 seconds. ≥ When in Quick Start Standby Mode about 70% of the power used in recording pause mode is being consumed, so the recording time will be reduced. ≥ This unit is turned...
Page 76
76VQT3U98 Zebra Zebra display: Parts where white saturation (color saturation) is likely to occur (extremely brightly lit or shiny parts) are displayed with diagonal lines (zebra pattern). Marker display: Displays the luminance level of the center of the screen (luminance display frame) in %. It makes the adjustment of the brightness of the object easier, by checking the luminance level of the object, when recording same object in different surroundings. ≥Marker display is displayed between 0% and...
Page 77
![Page 77
77VQT3U98
Switching the screen indications/mode information
display
≥To cancel, press the DISP/MODE CHK button again.
∫ To display the Mode Information
List of functions assigned to the USER buttons (USER1 to USER3) and settings of the
[SUB REC BUTTON] and [SUB ZOOM] are displayed by pressing and holding the DISP/
MODE CHK button.
≥They are displayed only while the DISP/MODE CHK button is held. It is disappeared when
the button is released.
DISP/MODE CHK buttonAll the screen display other than the...](http://img.usermanuals.tech/thumb/58/64195/w300_hdc-z10000_en_om_d-76.png "Page 77
77VQT3U98
Switching the screen indications/mode information
display
≥To cancel, press the DISP/MODE CHK button again.
∫ To display the Mode Information
List of functions assigned to the USER buttons (USER1 to USER3) and settings of the
[SUB REC BUTTON] and [SUB ZOOM] are displayed by pressing and holding the DISP/
MODE CHK button.
≥They are displayed only while the DISP/MODE CHK button is held. It is disappeared when
the button is released.
DISP/MODE CHK buttonAll the screen display other than the...")
77VQT3U98 Switching the screen indications/mode information display ≥To cancel, press the DISP/MODE CHK button again. ∫ To display the Mode Information List of functions assigned to the USER buttons (USER1 to USER3) and settings of the [SUB REC BUTTON] and [SUB ZOOM] are displayed by pressing and holding the DISP/ MODE CHK button. ≥They are displayed only while the DISP/MODE CHK button is held. It is disappeared when the button is released. DISP/MODE CHK buttonAll the screen display other than the...
Page 78
78VQT3U98 You can use convenient functions just by the easy operation of touching the screen. 1Touch the LCD monitor in the recording screen or playback screen. ≥The operation icons are displayed. 2Touch an operation icon.≥The following function is available. Refer to the respective pages for the operation. *1 It is not displayed in the Playback Mode. *2 It is not displayed in the Intelligent Auto Mode. *3 It is displayed only when connected to the headphone terminal. ≥ If you touch the screen while an...
Page 79
![Page 79
79VQT3U98
1Change the mode to .
2Touch the play mode select icon A.
3Select the [MEDIA] and [VIDEO/
PICTURE] you wish to play back.
≥ Touch [ENTER].
≥ An icon is displayed in the thumbnail display when
video item is touched. ( ,
)
4Touch the scene or the still picture to be
played back.
≥The recording format of the selected scene is displayed in the
thumbnail display of the motion pictures. ( , ,
etc.)
≥ is displayed on the 3D still picture in the thumbnail
display of the still pictures.
≥ Next...](http://img.usermanuals.tech/thumb/58/64195/w300_hdc-z10000_en_om_d-78.png "Page 79
79VQT3U98
1Change the mode to .
2Touch the play mode select icon A.
3Select the [MEDIA] and [VIDEO/
PICTURE] you wish to play back.
≥ Touch [ENTER].
≥ An icon is displayed in the thumbnail display when
video item is touched. ( ,
)
4Touch the scene or the still picture to be
played back.
≥The recording format of the selected scene is displayed in the
thumbnail display of the motion pictures. ( , ,
etc.)
≥ is displayed on the 3D still picture in the thumbnail
display of the still pictures.
≥ Next...")
79VQT3U98 1Change the mode to . 2Touch the play mode select icon A. 3Select the [MEDIA] and [VIDEO/ PICTURE] you wish to play back. ≥ Touch [ENTER]. ≥ An icon is displayed in the thumbnail display when video item is touched. ( , ) 4Touch the scene or the still picture to be played back. ≥The recording format of the selected scene is displayed in the thumbnail display of the motion pictures. ( , , etc.) ≥ is displayed on the 3D still picture in the thumbnail display of the still pictures. ≥ Next...
Page 80
80VQT3U98 ∫Change the thumbnail display While the thumbnail is displayed, the thumbnail display changes in the following order if the zoom lever or the sub zoom lever is operated to side or side. * Detailed information of the scene is displayed when playing back motion pictures. Following information is displayed. jStart T C j Start U B j Date j Time zone j Recording time j Format ≥ 9 scenes display returns if the unit is turned off or the mode is changed. ≥ By displaying in 1 scene, recording...