Panasonic Hdc Z10000 Owners Manual

41VQT3U98
∫3D guide display
The 3D guide display is a guideline of distance between the subject and this unit to effectively 
reproduce the subject as a 3D image.
≥The values of the 3D guide display will change according to the zoom magnification and 
convergence point settings.
To switch the screen size assumed for playbackIt is possible to switch the range of the 3D guide display in accordance with the screen size 
assumed for playback when the [3D GUIDE] is set.
≥Set [3D/2D REC MODE] to [3D]. ( l36)...

42VQT3U98
To record in such a way that 3D image of the subject can be effectively 
reproduced
We recommend that you record with the subject positioned within the range of the 3D guide 
display.
3D guide display
AMinimum distance on 3D guide display
B Maximum distance on 3D guide display
≥When the subject is out of the range of the 3D guide display, the 3D guide display is 
displayed in red. Move the unit and change the position and angle of view with respect to 
the subject, adjust the convergence dial...

43VQT3U98
∫3D Fine
The position, focus, and iris of the left and right lenses can be finely adjusted.
≥Set [3D/2D REC MODE] to [3D]. ( l36)
≥ Connect this unit to the 3D compatible television using a HDMI cable (optional). 
(l 88)
1Select the menu.
2Touch the desired setting item to adjust.
≥To adjust the [FOCUS ADJUST], set the Manual Focus Mode. ( l51)
3Touch [EXIT] to complete the setting.
≥When distortion appears in the 3D video for a  zoom operation after adjustment, readjust 
the viewing angle.
≥...

44VQT3U98
Focus adjustment
1Touch r/s to adjust the focus.
≥It will return to default setting when [Reset] is touched.≥Focus Assist will operate when [FA] is touched, and 
the part that is focused will be displayed in red. 
Touch [FA] again to cancel the operation.
≥ Image of the left and right lenses will switch every 
time the lens switch icon is touched.
≥
Adjusting the image from the left lens is not possible.
2Touch [ENTER].
Iris adjustment
1Touch r/s to adjust the brightness.
≥It will return to...

45VQT3U98
3D still pictures and 2D still pictures in [  (1920k1080)] (16:9) are recorded for 3D 
Recording Mode, and 2D still pictures in [  (2304 k1296)] (16:9) are recorded for 2D 
Recording Mode.
1Change the mode to  .≥ Extract the LCD monitor.
2Press the   button.≥Remaining number of recordable pictures is 
displayed while still pictures are being 
recorded.
∫ About the screen indications while recording still pictures
≥3D still pictures are recorded in MPO format, and 2D still pictures in JPEG...

46VQT3U98
≥ is displayed in the Manual Mode.
≥ The following modes appropriate for the condition are set just by pointing the unit to what 
you want to record in the Intelligent Auto Mode.
≥Depending on the recording conditions, the unit may not enter the desired mode.
≥ In the Portrait, Spotlight, or Low Light Mode, the face will be surrounded by a white frame 
when detected. In the Portrait Mode, a subject that is bigger and close to center of the 
screen will be surrounded  by an orange frame. (l125)...

47VQT3U98
∫Intelligent Auto Mode
When switching to Intelligent Auto Mode, the Auto White Balance and Auto Focus operate 
and automatically adjust the color balance and focusing.
Depending on the brightness of the subject etc., the aperture and shutter speed are 
automatically adjusted for an optimum brightness.
≥Color balance and focus may not be adjusted automatically depending on light sources or 
scenes. If so, manually adjust these settings. ( l51, 52)
Automatic White BalanceThe illustration shows...

48VQT3U98
It can be zoomed up to 10k for the 3D Recording Mode, and up to 12 k for the 2D Recording 
Mode.
≥ It can zoom up to 23 k when the [i.Zoom] is set to [ON] during the 2D Recording Mode. 
( l 118)
≥ Zoom magnification can be checked in the screen display of Z00 to Z99. The value gets 
larger when zoomed in, and the value gets smaller when zoomed out.  99 is displayed 
during the i.Zoom.
Ring zoom
Zoom operation can be done using the zoom ring.
Recording
Zoom in/out function
Zoom ring  A
Zoom by...

49VQT3U98
∫About the zoom speed
≥The zoom speed will vary depending on how far the zoom lever is pressed or how fast the 
zoom ring is rotated.
≥ Zoom speed of the sub zoom lever will vary depending on the setting of [SUB ZOOM]. 
(l 126)
≥ The zoom speed does not vary when operating with the wireless remote control.
≥If you take your finger off the zoom lever during zoom operation, the operation sound may 
be recorded. When returning the zoom lever to the original position, move it quietly.
≥ It can be...

50VQT3U98
Use the image stabilizer to reduce the effects of shake during recording.
This unit is equipped with Optical Image Stabilizer in the 3D Recording Mode.
This unit is equipped with Hybrid Optical Image Stabilizer in the 2D Recording Mode.
Hybrid Optical Image Stabilizer is a hybrid of optical and electrical image stabilizer.
∫Changing Image Stabilizer Mode
≥Set [3D/2D REC MODE] to [2D]. ( l36)
When set to [ON], you can further improve image stabilization for recording while walking, or 
holding...