Panasonic Hdc Z10000 Owners Manual

11VQT3U98
Check the accessories before using this unit.
Keep the accessories out of reach of children to prevent swallowing.
Product numbers correct as of Oct. 2011. These may be subject to change.≥Keep the microphone holder screw, 
microphone holder adaptor and INPUT 
terminal cap out of reach of children to 
prevent swallowing.
Accessories
Battery pack
CGA-D54
Battery charger
DE-A88B
AC adaptor
VSK0725
AC cable
(for AC adaptor)
K2CB2CB00022
AC cable
(for Battery charger)
K2CA2CA00025
Eye cup
VMG2030...

12VQT3U98
1 Shoulder strap fixture
2 Sub zoom lever (l48,126)
≥ This lever functions in the same manner 
as the zoom lever.
3 Sub recording start/stop button  (l 33, 126)
≥ This button functions in the same manner 
as the recording start/stop button.
4 Accessory shoe
5 Microphone holder attchment part 
(l 15)
6 Audio input terminals 1, 2 (XLR 3 pin) 
[AUDIO INPUT1,2] ( l16, 59)
7 Zoom lever [T/W] (In Recording  Mode) ( l48)
Volume lever [ rVOL s]/Thumbnail 
display switch [ / ] (In Playback 
Mode) (...

13VQT3U98
18 Wireless remote control sensor (l 32)
19 Internal microphones
20 Recording lamp ( l127)
21 Speaker
22 Lens ( l16)
23 INPUT 1, 2 (LINE/MIC) switches  (l 59)
24 INPUT 1, 2 (+48V) switches ( l59)
25 User 1, 2, 3 buttons [USER1, USER2,  USER3] ( l67)
26 Intelligent auto/Manual switch 
[iA/MANU] ( l46)
27 Quick start button [QUICK START]  (l 75)
28 Quick start lamp ( l75)
29 Focus ring ( l51)
30 Zoom ring ( l48)
31 Iris ring ( l54)
32 Convergence dial [CONV.] ( l40)
33 3D guide button [3D GUIDE]...

14VQT3U98
44 LCD monitor extract part [PULL] (l 25)
45 LCD monitor (Touch screen) ( l26)
46 Shoulder strap fixture
47 Eye cup attachment part ( l15)
48 Eye cup ( l15)
49 Viewfinder ( l28)
50 Battery release button [PUSH] ( l19)
51 Battery holder ( l19) 52 DC input terminal [DC IN] (
l21)
≥ Do not use any other AC adaptors except 
the supplied one.
53 Mode switch ( l24)
54 CH1, CH2 switches [CH1, CH2] ( l59)
55 Audio control knobs [CH1, CH2]  (l 62)
56 SD Card slot cover ( l23)
57 Access lamp (card 1) (...

15VQT3U98
∫Adjust the length of the grip belt so that it fits your hand.
∫ Attaching the eye cup
Attach by aligning the notch of the eye cup attachment part with the protrusion at the inside of 
the eye cup.
∫Attaching the microphone holder
≥Attach by using a commercially available screw driver.
≥ When attaching an external microphone (optional) to the microphone holder attchment 
part, use the supplied microphone holder and microphone holder adaptor.
≥ The microphone holder is set up so that a 21 mm...

16VQT3U98
≥When attaching the microphone holder and the microphone holder adaptor, be sure to 
tighten the screws firmly even though you might hear a squeaking sound.
∫ Attaching the tripod
≥There are tripod mounting holes that are 
compatible with 1/4-20UNC and 3/8-16UNC 
screws. Use the size that matches the diameter of 
the tripod’s fixing screw.
≥ If you attach a tripod which has 5.5 mm (0.22 q) 
screw or larger, it may damage this unit.
∫ Attaching the lens cap
Protect the lens surface with the lens...

17VQT3U98
∫About batteries that you can use with this unit
The battery that can be used with this unit is CGA-D54.
Preparation
Power supply
It has been found that counterfeit battery packs which look very similar to the 
genuine product are made available to purchase in some markets. Some of these 
battery packs are not adequately protected with internal protection to meet the 
requirements of appropriate safety standards. There is a possibility that these 
battery packs may lead to fire or explosion....

18VQT3U98
Charging the battery
Important:
≥Do not use the AC cable with any other equipment as it is designed only for this unit. 
Also, do not use the AC cable from other equipment with this unit.
≥ It is recommended to charge the battery in a temperature between 10 oC and 30 oC 
(50 °F and 86 °F).
(The battery temperature should also be the same.)
C AC cable (K2CA2CA00025; supplied)
≥ Insert the plugs as far as they will go.
1Connect the AC cable to the battery charger and the AC outlet.
≥Use the AC...

19VQT3U98
Inserting/removing the battery
Install the battery by inserting it in the direction shown in the figure.
Removing the battery
Make sure that the power switch is set to 
OFF and the status indicator is turned off, 
and then remove by holding onto it taking 
care not to drop. (l24)
While pushing the PUSH button, remove 
the battery.
Insert the battery until it clicks and 
locks.
HDC-Z10000P-VQT3U98_mst.book  19 ページ  ２０１１年１０月１７日　月曜日　午後２時２４分 

20VQT3U98
Charging and recording time
∫Charging/Recording time
≥Temperature: 25 oC (77 oF)/humidity: 60%RH
≥ When using the viewfinder (times in parentheses are when using the LCD monitor)
≥ These times are approximations.
≥ The indicated charging time is for when the battery has been discharged completely. 
Charging time and recordable time vary depending on the usage conditions such as 
high/low temperature.
≥The actual recordable time refers to the recordable time when repeatedly starting/stopping...