Panasonic Hdc Z10000 Owners Manual

							71VQT3U98
The White Balance can be changed to ATW Lock. (l52)
≥ It will return to ATW when canceled.
≥This cannot be set when the White Balance is set to anything other than ATW.
The in-focus area is displayed in red.
≥ The red display does not appear on the images actually recorded.
≥ The red display does not appear on TV.
Press USER button or touch USER button icon in the recording screen.
≥ Set [3D/2D REC MODE] to [2D]. ( l36)
≥ The zoom magnification will change every time the button is pressed or the button icon is 
touched.
2 k  #  5k  #  10k #  Setting canceled
≥The larger the digital zoom magnification, the more the image quality is degraded.
≥ Digital zoom is not possible when the [REC FORMAT] is [1080/24p].
≥ Digital zoom is cancel ed in following cases:
j If you turn the unit off
j If you use the Quick Start Mode ( l75)
j If you change the mode
It is possible to adjust the parallax of the scene recorded in 3D during the Playback Mode.
≥ Change the mode to   and touch the play mode select icon. 
Then, set [VIDEO/PICTURE] to [3D]. ( l79)
1 Pause during the playback of the scene recorded in 3D.
2 Press USER button or touch USER button icon.
3 Touch  /  to adjust settings.
4 Press the USER button or touch the USER button icon again to end the 
setting.
≥The setting is canceled in following cases:
jIf you stop playback
j If you turn the unit off
j If you change the mode
ATW Lock
Focus Assist
Digital Zoom
Playback parallax adjustment
≥Stop the operation when you feel fatigue, discomfort, or otherwise strange while 
playing back or adjusting.
HDC-Z10000P-VQT3U98_mst.book  71 ページ  ２０１１年１０月１７日　月曜日　午後２時２４分 
						

							72VQT3U98
A graph with brightness as horizontal axis and number of pixels at that brightness as vertical 
axis is displayed. It is possible to determine the exposure of the whole image by looking at 
the distribution in the graph.
≥To adjust the brightness, refer to page 54.
Switches the display method of the 3D video.
≥ These settings will not affect the actual images recorded.
≥ Set [3D/2D REC MODE] to [3D]. ( l36)
Press USER button or touch USER button icon.
≥ It will switch every time the button is pressed or the button icon is touched.
3D Display  # MIX Display  # 3D Display off
∫ To change to 3D display when in the Playback Mode
≥Change the mode to   and touch the play mode select icon. 
Then, set [VIDEO/PICTURE] to  [3D] or [PICTURE]. (l79)
1 Play back the scene or still picture recorded in 3D.≥It is convenient to use Pause.2 Press USER button or touch USER button icon.≥It will switch every time the button is pressed or the button icon is touched.
3D Display  # 3D Display off
≥This cannot be set when [3D OUTPUT] is set to [HDMI]. ( l74, 92)
Image displayed on the screen is switched to  the image from the right lens when the 3D 
display is turned off in the 3D Recording Mode.   is displayed when displaying the video 
from the right lens.
≥ Set [3D/2D REC MODE] to [3D]. ( l36)
≥ Set the 3D Display to off.
≥The image displayed on the TV will not switch to the image from the right lens even if the 
R-Image is set while the TV is connected.
Histogram
3D Display
3D Display:3D video is displayed.   is displayed.
MIX Display:The images of the left and right lenses are displayed overlapped 
and  is displayed.
3D Display off:The image from the left lens is only displayed.
R-image
3D
HDC-Z10000P-VQT3U98_mst.book  72 ページ  ２０１１年１０月１７日　月曜日　午後２時２４分 
						

							73VQT3U98
3D image can be recorded as close as approximately 45 cm (1.5 feet) to the subject when 
the zoom magnification is set to 1k.
≥ Set [3D/2D REC MODE] to [3D]. ( l36)
≥  is displayed.
≥ Canceling returns the convergence point to the original position.
≥The setting is canceled in following cases:
jIf you adjust the CONV. dial ( l40)
j If you perform the convergence reset
The display of the convergence point goes to  , and the convergence point is automatically 
set to prevent 3D video that tires or discomforts the viewer.
≥ When the zoom magnification is changed, the convergence point is adjusted automatically, 
so please use this setting you wish to record faraway subjects without worrying about 
convergence.
≥ The setting is canceled in following cases:
jIf you adjust the CONV. dial ( l40)
j If you use the 3D Macro
Approximately 2 seconds at the end of the video recorded last can be played back. It will 
return to recording screen once the playback is completed.
≥ Playback operation is not possible during the Recording Check.
≥ Recording Check is not po ssible in following cases:
j When the unit is turned on/off
j When the mode switch is operated
j When the setting of [3D/2D REC MODE] or [REC FORMAT] is changed
j When the SD Card is inserted/removed
j During the interval recording
3D Macro
≥Stop the recording when you feel fatigue, discomfort, or otherwise strange while 
recording.
Convergence Reset
Recording Check
HDC-Z10000P-VQT3U98_mst.book  73 ページ  ２０１１年１０月１７日　月曜日　午後２時２４分 
						

							74VQT3U98
The motion picture recorded last can be deleted.
Deleted scenes cannot be restored.
1 Press USER button or touch USER button icon in the recording screen.
2 Touch [YES].
≥It will return to recording screen without deleting by touching [NO].
≥Last Scene Delete is not possible in following cases:
jWhen power is turned on/off
j When the mode switch is operated
j When the setting of [3D/2D REC MODE] or [REC FORMAT] is changed
j When the SD Card is inserted/removed
j During the interval recording
It is possible to switch the destination of the 3D full high definition quality video output when 
this unit is connected with the 3D compatible television that is compatible with the frame 
sequential format using a HDMI cable (optional).
≥ Set [3D/2D REC MODE] to [3D]. ( l36)
Press USER button or touch USER button icon.
≥ It will switch every time the button is pressed or  the button icon is touched. (Black screen is 
displayed for few seconds.)
LCD  # HDMI
∫To change the 3D video output selection when in the Playback Mode
≥Change the mode to   and touch the play mode select icon. 
Then, set [VIDEO/PICTURE] to [3D]. ( l79)
With the playback paused, press USER button or touch USER button icon.
≥ It is also possible to set with the menu. ( l92)
≥ This cannot be set during recording or playback.
≥ If the TV used is not compatible with the frame sequential format, the picture quality will not 
be of 3D full high definition video even if it is set to HDMI.
Last Scene Delete
3D video output selection
LCD:3D video is displayed on the LCD monitor of this unit and the 3D 
compatible TV. (The 3D video displayed on the TV will be a 3D 
video in side-by-side format, and the picture quality will be 
different from the 3D full high definition video.)
HDMI:Displays 3D full high definition image on the 3D-compatible TV. 
(2D image is displayed on the LCD monitor of this unit.)
HDC-Z10000P-VQT3U98_mst.book  74 ページ  ２０１１年１０月１７日　月曜日　午後２時２４分 
						

							75VQT3U98
Quick Start
1 Press and hold down the QUICK START button until the display on the LCD monitor/
viewfinder disappears.
The quick start lamp  E flashes green and the unit goes 
into Quick Start Standby Mode.
2 Press the QUICK START button.The quick start lamp  E goes off and the unit is put into 
recording pause about 0.6 seconds.
≥ When in Quick Start Standby Mode about 70% of the power used in recording pause 
mode is being consumed, so the recording time will be reduced.
≥ This unit is turned off after approximately 30 minutes elapse in Quick Start Standby Mode.
≥ Quick Start Standby Mode is cleared when the mode switch is set to  .
≥ Depending on the recording conditions and me nu settings, time for Quick Start may be 
longer than 0.6 seconds.
≥ It may take some time for Automatic White Balance to adjust.
≥ In the Quick Start Mode, the zoom magnification becomes 1 k.
Recording
Useful functions



ZEBRA
BARS
DISP/MODE CHK
QUICK START
A DISP/MODE CHK button
B ZEBRA button
C QUICK START button
D BARS button


HDC-Z10000P-VQT3U98_mst.book  75 ページ  ２０１１年１０月１７日　月曜日　午後２時２４分 
						

							76VQT3U98
Zebra
Zebra display:
Parts where white saturation (color saturation) is likely to occur (extremely brightly lit or shiny 
parts) are displayed with diagonal lines (zebra pattern).
Marker display:
Displays the luminance level of the center of the screen (luminance display frame) in %.
It makes the adjustment of the brightness of the object easier, by checking the luminance 
level of the object, when recording same object in different surroundings.
≥Marker display is displayed between 0% and  99%. It will be displayed as 99%  when it is 
over 99%.
≥ You can record an image with little white saturation if you manually adjust the shutter 
speed or brightness. (l 54, 56)
≥ The zebra pattern does not appear on the images actually recorded.
≥ It is also possible to adjust the level of the zebra pattern to be displayed. ( l122)
Color Bar Screen
≥To cancel, press the BARS button again.
≥ It will be canceled when t he unit is turned off.
≥ While the color bar is displayed, a test tone will be output from the headphone terminal, 
HDMI terminal and AV multi terminal. (The test tone that is output will be 1 kHz.) It will not 
be output from the speaker of this unit.
≥ It is possible to record the color bar screen.
ZEBRA buttonIt will switch between the zebra display and the marker display every time the button is 
pressed.
Zebra 1  # Zebra 2
* # Marker* # setting canceled
* It is not displayed when the [ZEBRA DETECT 2]/[MARKER] is set to [OFF]. ( l123)
BARS buttonPress the BARS button to output a color bar screen to a television or monitor so you can 
adjust them.
HDC-Z10000P-VQT3U98_mst.book  76 ページ  ２０１１年１０月１７日　月曜日　午後２時２４分 
						

							77VQT3U98
Switching the screen indications/mode information 
display
≥To cancel, press the DISP/MODE CHK button again.
∫ To display the Mode Information
List of functions assigned to the USER buttons (USER1 to USER3) and settings of the 
[SUB REC BUTTON] and [SUB ZOOM] are displayed by pressing and holding the DISP/
MODE CHK button.
≥They are displayed only while the DISP/MODE CHK button is held. It is disappeared when 
the button is released.
DISP/MODE CHK buttonAll the screen display other than the Counter display, Recording start/stop, Zebra display, 
Marker, and Safety Zone will disappear when this button is pressed. ( l132)
HDC-Z10000P-VQT3U98_mst.book  77 ページ  ２０１１年１０月１７日　月曜日　午後２時２４分 
						

							78VQT3U98
You can use convenient functions just by the easy operation of touching the screen.
1Touch the LCD monitor in the recording 
screen or playback screen.
≥The operation icons are displayed.
2Touch an operation icon.≥The following function is available. Refer to the 
respective pages for the operation.
*1 It is not displayed in the Playback Mode.
*2 It is not displayed in the Intelligent Auto Mode.
*3 It is displayed only when connected to the headphone terminal.
≥ If you touch the screen while an operation icon is being displayed or do not touch the icon 
for a certain period, it will disappear. To display again, touch the screen.
∫ Headphone Volume Adjustment
Adjust the volume of the headphone while recording.1 Display the operation icons and touch  .
2 Touch  /  to adjust the volume.
≥Actual volume to be recorded does not change.3 Touch   to exit the setting.
Recording
Using of Operation Icons
,   etc. Customize Scene ( l110 )*1, 2
,   etc. USER Button Icon ( l67)
,  White Balance ( l52)
*1, 2
Shutter Speed Adjustment ( l56)*1, 2
Headphone Volume Adjustment*1, 3
5.1 ch Microphone Level (l 62)*1
SCN1SCN2SCN3SCN4SCN5SCN6
SHTRAch
Conv.R3DREC.C
AT W
SCN1SCN2
AT WConv.R
AchBch
SHTR
HDC-Z10000P-VQT3U98_mst.book  78 ページ  ２０１１年１０月１７日　月曜日　午後２時２４分 
						

							79VQT3U98
1Change the mode to  .
2Touch the play mode select icon A.
3Select the [MEDIA] and [VIDEO/
PICTURE] you wish to play back.
≥ Touch [ENTER].
≥ An icon is displayed in the thumbnail display when 
video item is touched. ( ,
)
4Touch the scene or the still picture to be 
played back.
≥The recording format of the selected scene is displayed in the 
thumbnail display of the motion pictures. ( ,  , 
etc.)
≥  is displayed on the 3D still picture in the thumbnail 
display of the still pictures.
≥ Next (Previous) page can be displayed by touching  / .
5Select the playback operation by touching the operation icon.
Playback
Motion picture/Still picture playback
B Operation icon
≥ If you touch the screen while an operation icon is being 
displayed or do not touch the icon for a certain period, it 
will disappear. To display again, touch the screen.
11 12 2
2333
44
45 55666123
45 6
77 78
8
8999789

2D
11 12 2
2333
44
45 55666123
45 6
77 78
8
8999789
3D

Conv.R3DREC.C
AT WTC TC 00:00:00:00
 00:00:00:00TC 00:00:00:00
HDC-Z10000P-VQT3U98_mst.book  79 ページ  ２０１１年１０月１７日　月曜日　午後２時２４分 
						

							80VQT3U98
∫Change the thumbnail display
While the thumbnail is displayed, the thumbnail display 
changes in the following order if the zoom lever or the sub 
zoom lever is operated to   side or   side.
* Detailed information of the scene is displayed when playing back motion pictures. 
Following information is displayed.
jStart T C
j Start U B
j Date j
Time zone
j Recording time
j Format
≥ 9 scenes display returns if the unit is turned off or the mode is changed.
≥ By displaying in 1 scene, recording date and time are displayed when playing back motion 
pictures, and recording date and file number when playing back still pictures.
∫ Speaker/Headphone volume adjustment
Operate the volume lever or the 
sub zoom lever to adjust the 
speaker/headphone volume during 
Motion Picture Playback Mode.
To w a r d s  “ r”:
Increases the volume
To w a r d s  “ s”:
Decreases the volume
≥ To play back the scenes or still pictures recorded  in 3D as 2D, set the 3D Display to off. 
( l 72)
≥ Sound will be heard only during normal playback.
≥ If pause play is continued for 5 minutes, the screen returns to the thumbnails.
≥ At playback of scenes recorded in 2D, the screen goes dark momentarily when switching 
between scenes recorded using [1080/60p] and other scenes.
≥ The screen goes dark momentarily when switchin g between 3D still pictures and 2D still 
pictures.
Motion picture playbackStill picture playback
1/ ;: Playback/Pause
6 : Rewind playback
5 : Fast forward playback
∫ : Stops the playback and shows 
the thumbnails.
: Display the direct playback bar  (l 83) 1/
;: Slide show (playback of the still 
pictures in numerical order) start/
pause.
2; : Plays back the previous picture.
;1 : Plays back the next picture.
∫ : Stops the playback and shows 
the thumbnails.
(  side) (  side)
20 scenes  () 9 scenes  () 1 scene ()  Scene information display
*
T T
W
W
W
W
T
T
W
W
TTT
W
WWWWW
TTT
W
WW
HDC-Z10000P-VQT3U98_mst.book  80 ページ  ２０１１年１０月１７日　月曜日　午後２時２４分