Panasonic Hdc Z10000 Owners Manual
Have a look at the manual Panasonic Hdc Z10000 Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 108
108VQT3U98
1Connect the unit to the Blu-ray disc recorder or high-definition
(AVCHD) compatible DVD recorder.
≥The USB function selection screen will appear on the screen of the unit.
2Touch [RECORDER] on the screen of this unit.≥When you select an option other than [RECORDER], reconnect the USB cable.
3Touch the media you wish to dub.
≥When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen
to turn the LCD monitor on.
4Dubbing through operations on the Bl u-ray disc...](http://img.usermanuals.tech/thumb/58/64195/w64_hdc-z10000_en_om_d-107.png "Page 108
108VQT3U98
1Connect the unit to the Blu-ray disc recorder or high-definition
(AVCHD) compatible DVD recorder.
≥The USB function selection screen will appear on the screen of the unit.
2Touch [RECORDER] on the screen of this unit.≥When you select an option other than [RECORDER], reconnect the USB cable.
3Touch the media you wish to dub.
≥When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen
to turn the LCD monitor on.
4Dubbing through operations on the Bl u-ray disc...")
![Page 109
109VQT3U98
∫Dubbing using equipment without an SD card slot or a USB terminal,
or using a video device
You can dub by connecting an AV multi cable.
≥The scenes recorded in 3D will be dubbed as 2D video.
≥ Images are dubbed in standard quality.
≥ Use the AC adaptor to free you from worrying about the battery running down.
≥ Change the mode to
.≥Set [AV MULTI] to [AV OUT]. ( l90)
1Connect this unit to a video device and start playback on this unit.
2Start recording on the connected device.≥To stop...](http://img.usermanuals.tech/thumb/58/64195/w64_hdc-z10000_en_om_d-108.png "Page 109
109VQT3U98
∫Dubbing using equipment without an SD card slot or a USB terminal,
or using a video device
You can dub by connecting an AV multi cable.
≥The scenes recorded in 3D will be dubbed as 2D video.
≥ Images are dubbed in standard quality.
≥ Use the AC adaptor to free you from worrying about the battery running down.
≥ Change the mode to
.≥Set [AV MULTI] to [AV OUT]. ( l90)
1Connect this unit to a video device and start playback on this unit.
2Start recording on the connected device.≥To stop...")
![Page 110
110VQT3U98
Refer to page 30 for how to set up the Menu.
Camera Setup
≥Switch to manual mode. ( l46)
Preferred camera setting information can be saved to each scene file. Switch the scene file in
accordance with the recording conditions.
1 Touch [CUSTOMIZE SCENE].
2 Touch the scene file.
≥ The scene file will switch by touching [SCENE1] to [SCENE6].
≥ Touch [EXIT] to exit the menu screen.
3 (To change the setting of the scene file)
Change the setting of the camera setting menu.
≥Following settings for...](http://img.usermanuals.tech/thumb/58/64195/w64_hdc-z10000_en_om_d-109.png "Page 110
110VQT3U98
Refer to page 30 for how to set up the Menu.
Camera Setup
≥Switch to manual mode. ( l46)
Preferred camera setting information can be saved to each scene file. Switch the scene file in
accordance with the recording conditions.
1 Touch [CUSTOMIZE SCENE].
2 Touch the scene file.
≥ The scene file will switch by touching [SCENE1] to [SCENE6].
≥ Touch [EXIT] to exit the menu screen.
3 (To change the setting of the scene file)
Change the setting of the camera setting menu.
≥Following settings for...")
![Page 111
111VQT3U98
Adjusts the level of the image outline correction.1 Touch [DETAIL LEVEL].
2 Touch / to adjust settings.
3 Touch [EXIT] to exit the menu screen.
Adjusts the degree of vertical outline correction in images.1 Touch [V DETAIL LEVEL].
2 Touch / to adjust settings.
3 Touch [EXIT] to exit the menu screen.
Adjusts the level to eliminate the noise of the detail.1 Touch [DETAIL CORING].
2 Touch / to adjust settings.
≥Setting to s direction gives crisp images but allows a slight increase in noise....](http://img.usermanuals.tech/thumb/58/64195/w64_hdc-z10000_en_om_d-110.png "Page 111
111VQT3U98
Adjusts the level of the image outline correction.1 Touch [DETAIL LEVEL].
2 Touch / to adjust settings.
3 Touch [EXIT] to exit the menu screen.
Adjusts the degree of vertical outline correction in images.1 Touch [V DETAIL LEVEL].
2 Touch / to adjust settings.
3 Touch [EXIT] to exit the menu screen.
Adjusts the level to eliminate the noise of the detail.1 Touch [DETAIL CORING].
2 Touch / to adjust settings.
≥Setting to s direction gives crisp images but allows a slight increase in noise....")
![Page 112
112VQT3U98
Adjustment of black level based on the image is performed.1 Touch [MASTER PED].
2 Touch / to adjust the black level.
3 Touch [EXIT] to exit the menu screen.
Adjusting brightness during the Auto Iris Mode. (l54)
Selects the DRS (Dynamic Range Stretcher) function.
It is possible to expand the dynamic range by compressing the video signal level of the highly
illuminated area that gets washed out with standard recording.
1 Touch [DRS].
2 Touch the desired setting item.
≥ Higher the value,...](http://img.usermanuals.tech/thumb/58/64195/w64_hdc-z10000_en_om_d-111.png "Page 112
112VQT3U98
Adjustment of black level based on the image is performed.1 Touch [MASTER PED].
2 Touch / to adjust the black level.
3 Touch [EXIT] to exit the menu screen.
Adjusting brightness during the Auto Iris Mode. (l54)
Selects the DRS (Dynamic Range Stretcher) function.
It is possible to expand the dynamic range by compressing the video signal level of the highly
illuminated area that gets washed out with standard recording.
1 Touch [DRS].
2 Touch the desired setting item.
≥ Higher the value,...")
![Page 113
11 3VQT3U98
Tone or contrast of the image is set in accordance with the recorded scenes.1 Touch [GAMMA].
2 Touch the desired setting item.
≥Next (Previous) page can be displayed by touching / .
≥ When you select [CINE-LIKE D] or [CINE-LIKE V], we recommend setting the iris darker
than normal image for optimal results. ( l54)
3 Touch [EXIT] to exit the menu screen.
To avoid overexposure, select the compression level of the high intensity video signals
received through the image sensor.
1 Touch [KNEE]....](http://img.usermanuals.tech/thumb/58/64195/w64_hdc-z10000_en_om_d-112.png "Page 113
11 3VQT3U98
Tone or contrast of the image is set in accordance with the recorded scenes.1 Touch [GAMMA].
2 Touch the desired setting item.
≥Next (Previous) page can be displayed by touching / .
≥ When you select [CINE-LIKE D] or [CINE-LIKE V], we recommend setting the iris darker
than normal image for optimal results. ( l54)
3 Touch [EXIT] to exit the menu screen.
To avoid overexposure, select the compression level of the high intensity video signals
received through the image sensor.
1 Touch [KNEE]....")
![Page 114
114VQT3U98
Represents the color during the recording.1 Touch [MATRIX].
2 Touch the desired setting item.
3 Touch [EXIT] to exit the menu screen.
This makes skin colors appear softer for a more attractive appearance.
This is more effective if you record a person closely from the torso up.
1 Touch [SKIN TONE DTL].
2Touch [ON].
3 Touch [EXIT] to exit the menu screen.
≥If the background or anything else in the scene has colors similar to the skin color, they will
also be smoothed.
≥ If the brightness is...](http://img.usermanuals.tech/thumb/58/64195/w64_hdc-z10000_en_om_d-113.png "Page 114
114VQT3U98
Represents the color during the recording.1 Touch [MATRIX].
2 Touch the desired setting item.
3 Touch [EXIT] to exit the menu screen.
This makes skin colors appear softer for a more attractive appearance.
This is more effective if you record a person closely from the torso up.
1 Touch [SKIN TONE DTL].
2Touch [ON].
3 Touch [EXIT] to exit the menu screen.
≥If the background or anything else in the scene has colors similar to the skin color, they will
also be smoothed.
≥ If the brightness is...")
![Page 115
11 5VQT3U98
Recording Setup
Switch the Recording Mode to 3D or 2D. (l36)
Switch the picture quality of the motion pictures to record. The selectable recording format
differ depending on the setting of [3D/2D REC MODE]. ( l36)
The frame rate and the recording method will vary depending on the recording format.
*1 Motion picture recorded in [1080/30p] is converted to 1080/60i.
*2 It will output with 1080/60i when this unit is connected to a TV with a HDMI cable (optional). (Video will be recorded with...](http://img.usermanuals.tech/thumb/58/64195/w64_hdc-z10000_en_om_d-114.png "Page 115
11 5VQT3U98
Recording Setup
Switch the Recording Mode to 3D or 2D. (l36)
Switch the picture quality of the motion pictures to record. The selectable recording format
differ depending on the setting of [3D/2D REC MODE]. ( l36)
The frame rate and the recording method will vary depending on the recording format.
*1 Motion picture recorded in [1080/30p] is converted to 1080/60i.
*2 It will output with 1080/60i when this unit is connected to a TV with a HDMI cable (optional). (Video will be recorded with...")
![Page 116
116VQT3U98
≥Recordable time using the battery (l 20)
≥ This function’s default setting is [1080/60i] (3D Recording Mode)/[HA] (2D Recording
Mode).
≥ Please refer to page 147 about approximate recordable time.
≥ When the unit is moved a lot or moved quickly, or when a fast-moving subject is recorded
(particularly when recording in [HE] mode), mosaic-type noise may appear at playback.
You can set the relay recording and backup recording.
≥ Insert SD cards to card slot 1 and card slot 2.
∫ Relay...](http://img.usermanuals.tech/thumb/58/64195/w64_hdc-z10000_en_om_d-115.png "Page 116
116VQT3U98
≥Recordable time using the battery (l 20)
≥ This function’s default setting is [1080/60i] (3D Recording Mode)/[HA] (2D Recording
Mode).
≥ Please refer to page 147 about approximate recordable time.
≥ When the unit is moved a lot or moved quickly, or when a fast-moving subject is recorded
(particularly when recording in [HE] mode), mosaic-type noise may appear at playback.
You can set the relay recording and backup recording.
≥ Insert SD cards to card slot 1 and card slot 2.
∫ Relay...")
111VQT3U98 Adjusts the level of the image outline correction.1 Touch [DETAIL LEVEL]. 2 Touch / to adjust settings. 3 Touch [EXIT] to exit the menu screen. Adjusts the degree of vertical outline correction in images.1 Touch [V DETAIL LEVEL]. 2 Touch / to adjust settings. 3 Touch [EXIT] to exit the menu screen. Adjusts the level to eliminate the noise of the detail.1 Touch [DETAIL CORING]. 2 Touch / to adjust settings. ≥Setting to s direction gives crisp images but allows a slight increase in noise. Setting in the r direction reduces noise. 3 Touch [EXIT] to exit the menu screen. Adjusts color density.1 Touch [CHROMA LEVEL]. 2 Touch / to adjust settings. 3 Touch [EXIT] to exit the menu screen. Adjusts color balance.1 Touch [CHROMA PHASE]. 2 Touch / to adjust settings. 3 Touch [EXIT] to exit the menu screen. Finely adjusts color temperature after Ach White Balance adjustment. ( l53) Finely adjusts color temperature after Bch White Balance adjustment. ( l53) [DETAIL LEVEL] [V DETAIL LEVEL] [DETAIL CORING] [CHROMA LEVEL] [CHROMA PHASE] [COLOR TEMP A ch] [COLOR TEMP B ch] HDC-Z10000P-VQT3U98_mst.book 111 ページ ２０１１年１０月１７日 月曜日 午後２時２４分
112VQT3U98 Adjustment of black level based on the image is performed.1 Touch [MASTER PED]. 2 Touch / to adjust the black level. 3 Touch [EXIT] to exit the menu screen. Adjusting brightness during the Auto Iris Mode. (l54) Selects the DRS (Dynamic Range Stretcher) function. It is possible to expand the dynamic range by compressing the video signal level of the highly illuminated area that gets washed out with standard recording. 1 Touch [DRS]. 2 Touch the desired setting item. ≥ Higher the value, greater the compression level of the highly illuminated area. ≥ Higher the value, greater the noise of the dark area. 3 Touch [EXIT] to exit the menu screen. ≥If there are extremely dark or bright parts or the brightness is insufficient, the effect may not be clear. [MASTER PED] [AUTO IRIS LEVEL] [DRS] [OFF]/[1]/[2]/[3] HDC-Z10000P-VQT3U98_mst.book 112 ページ ２０１１年１０月１７日 月曜日 午後２時２４分
11 3VQT3U98 Tone or contrast of the image is set in accordance with the recorded scenes.1 Touch [GAMMA]. 2 Touch the desired setting item. ≥Next (Previous) page can be displayed by touching / . ≥ When you select [CINE-LIKE D] or [CINE-LIKE V], we recommend setting the iris darker than normal image for optimal results. ( l54) 3 Touch [EXIT] to exit the menu screen. To avoid overexposure, select the compression level of the high intensity video signals received through the image sensor. 1 Touch [KNEE]. 2 Touch the desired setting item. 3 Touch [EXIT] to exit the menu screen. ≥The unit goes to [AUTO] and the setting cannot be changed in the following cases: jWhen [DRS] is set to a setting other than [OFF] j When [GAMMA] is set to [CINE-LIKE D] or [CINE-LIKE V] [GAMMA] [HD NORM]:This gamma setting is suitable for high defenition picture quality recording. [LOW]:This is a gamma setting with gradual slope at the low illuminated area. It will produce tranquil image with sharper contrast. [SD NORM]:This is the standard picture quality images setting. [HIGH]:This is a gamma setting with sharp slope at the low illuminated area. It will produce brighter image with wider gradation on the low illuminated area with softer contrast. [B.PRESS]:Makes the contrast shaper than [LOW]. [CINE-LIKE D]:This is a gamma setting to make the image look like cinema. [CINE-LIKE V]:This is a gamma setting to make the image look like cinema with higher contrast than [CINE-LIKE D]. [KNEE] [AUTO]:Sets up automatically depending on the signal from the image sensor. [LOW]:Low setting (Compression starts at approx. 80%.) [MID]:Medium setting (Compression starts at approx. 90%.) [HIGH]:High setting (Compression starts at approx. 100%.) HDC-Z10000P-VQT3U98_mst.book 113 ページ ２０１１年１０月１７日 月曜日 午後２時２４分
114VQT3U98 Represents the color during the recording.1 Touch [MATRIX]. 2 Touch the desired setting item. 3 Touch [EXIT] to exit the menu screen. This makes skin colors appear softer for a more attractive appearance. This is more effective if you record a person closely from the torso up. 1 Touch [SKIN TONE DTL]. 2Touch [ON]. 3 Touch [EXIT] to exit the menu screen. ≥If the background or anything else in the scene has colors similar to the skin color, they will also be smoothed. ≥ If the brightness is insufficient, the effect may not be clear. ≥ If you record a person in the distance, the face may not be recorded clearly. In this case, set [SKIN TONE DTL] to [OFF] or zoom in on the face (close-up) to record. [MATRIX] [NORM1]:Suitable for recording in the open air or under a halogen lamp. [NORM2]:Suitable for brighter colors than the [NORM1] mode. [FLUO]:Suitable for recording indoors under fluorescent lamp. [CINE-LIKE]:Suitable for cinema-like image. [SKIN TONE DTL] [ON]/[OFF] HDC-Z10000P-VQT3U98_mst.book 114 ページ ２０１１年１０月１７日 月曜日 午後２時２４分
11 5VQT3U98 Recording Setup Switch the Recording Mode to 3D or 2D. (l36) Switch the picture quality of the motion pictures to record. The selectable recording format differ depending on the setting of [3D/2D REC MODE]. ( l36) The frame rate and the recording method will vary depending on the recording format. *1 Motion picture recorded in [1080/30p] is converted to 1080/60i. *2 It will output with 1080/60i when this unit is connected to a TV with a HDMI cable (optional). (Video will be recorded with 1080/24p.) *3 The quality of recording is higher in order of [PH], [HA], and then [HE]. ≥ is displayed when the recording format for the 3D Recording Mode is selected, and is displayed when the recording format for the 2D Recording Mode (progressive) is selected. ≥ For dubbing of the scenes recorded in 3D, or scenes recorded in the recording formats [PH], [1080/60p], [1080/30p], or [1080/24p], refer to page 107. ≥ Smoother motion picture can be recorded with the higher value for the frame rate. [i] and [p] of the frame rate means interlace and progressive respectively. Interlace (interlacing scanning) Video signal that divides the effective scanning lines to half and send them alternatively Progressive (progressive scanning) High density video signal sending the effect ive scanning lines simultaneously (It will be higher quality image than the interlace) ≥ It can record with highest quality image in this unit when set to [1080/60p]. : [RECORD SETUP] # desired setting [3D/2D REC MODE] [3D]/[2D] [REC FORMAT] 3D/2D Recording ModeRecording formatFrame rateRecording method 3D Recording Mode [1080/60i] 60i AVCHD 3D [1080/30p] *130p [1080/24p]*224p 2D Recording Mode (interlace) [PH]/[HA]/[HE]*360i AVCHD 2D Recording Mode (progressive) [1080/60p] 60p AVCHD Progressive [1080/30p] *130p AVCHD [1080/24p]*224p MENU HDC-Z10000P-VQT3U98_mst.book 115 ページ ２０１１年１０月１７日 月曜日 午後２時２４分
116VQT3U98 ≥Recordable time using the battery (l 20) ≥ This function’s default setting is [1080/60i] (3D Recording Mode)/[HA] (2D Recording Mode). ≥ Please refer to page 147 about approximate recordable time. ≥ When the unit is moved a lot or moved quickly, or when a fast-moving subject is recorded (particularly when recording in [HE] mode), mosaic-type noise may appear at playback. You can set the relay recording and backup recording. ≥ Insert SD cards to card slot 1 and card slot 2. ∫ Relay recording It is possible to continuously record on the SD card in the other card slot even when the available capacity of the SD card runs out during the recording. ≥ is displayed on the media to record the video. will disappear when the recording media is switched and the relay recording is started. ≥ Relay recording can only be performed once. ∫ Backup recording Same motion picture can be recorded on two SD cards. ≥ is displayed on the cards the motion pictures is recorded. ≥ When [SD CARD 1] is selected as the destination of recording the motion pictures, backup will be recorded on [SD CARD 2]. ≥ It is recommended to record on the SD cards that are same speed class and same capacity when performing the backup recording. (Relay recording) ≥Destination to record still pictures will be switched to other SD card after performing the relay recording. (Backup recording) ≥ Backup recording will not be performed for still pictures. [RELAY/BACKUP] [OFF]:Cancel the setting. [RELAY]:Set the relay recording [BACKUP]:Set the backup recording HDC-Z10000P-VQT3U98_mst.book 116 ページ ２０１１年１０月１７日 月曜日 午後２時２４分
11 7VQT3U98 A scene that moves slowly for long period of time is recorded frame by frame with an interval, and is recorded as a short time motion picture. One frame is recorded every recording interval that is set. The scene of one second is made up by 30 frames. ≥Switch to manual mode. ( l46) ≥ Set [3D/2D REC MODE] to [2D]. ( l36) ≥ appears on the screen. ≥ After recording, the setting of interval recording is canceled. ≥ Audio cannot be recorded. ( It will be silent in 2 ch) ≥ Maximum recordable time is 12 hours. ≥Still picture recording cannot be used. ≥ When the interval recording is set, recording format is set to [HA], and the setting cannot be changed. ≥ [TC MODE] is set to [NDF] and [TCG] is set to [REC RUN]. ( l64) ≥ [TIME LAPSE REC] is canceled in the following cases. jIf you turn the unit off j If you change the mode ≥ The shortest motion picture recording time is 1 second. ≥ Color balance and focus may not be adjusted automatically depending on light sources or scenes. If so, manually adjust these settings. ( l51, 52) Select the compensation mode for the time code. ( l64) [TIME LAPSE REC] [OFF]: Cancel the setting. [1 SECOND]/[10 SECONDS]/[30 SECONDS]/[1 MINUTE]/[2 MINUTES]: Change the recording interval. Setup exampleSetup time (recording interval)Recording timeRecorded time Sunset 1 sApprox. 1 h Approx. 2 m Blooming 30 sApprox. 3 h Approx. 12 s [TC MODE] [DF]/[NDF] HDC-Z10000P-VQT3U98_mst.book 117 ページ ２０１１年１０月１７日 月曜日 午後２時２４分
118VQT3U98 Sets the way the time code will move. (l64) Initial value of the time code can be set. ( l65) User Information can be set. ( l65) It will switch to the recording screen and record the image and audio from approximately 3 seconds prior to pressing the recording start/stop button when [PRE- REC] is touched. ≥ appears on the screen. ≥Aim the unit at the subject beforehand. ≥ There is no beep sound. ≥ PRE-REC is canceled in the following cases. jIf you turn the unit off j If you change the mode j After 3 hours have passed j Press the MENU button ≥ Video from 3 seconds prior cannot be recorded when the recording is started within approximately 3 seconds after setting the PRE-REC and switching to recording screen. ≥ Images displayed on the thumbnail in Playback Mode will differ from the motion pictures displayed at the start of playback. This zoom function allows you to maintain high-definition picture quality. (Up to k23) ≥ This can only be selected when the [3D/2D REC MODE] is [2D]. [TCG] [FREE RUN]/[REC RUN] [TC PRESET] [UB PRESET] [PRE-REC] [i.Zoom] [ON]/[OFF] PRE-REC HDC-Z10000P-VQT3U98_mst.book 118 ページ ２０１１年１０月１７日 月曜日 午後２時２４分
11 9VQT3U98 You can set the Hybrid Optical Image Stabilizer. (l50) ≥ This can only be selected when the [3D/2D REC MODE] is [2D]. You can record bright pictures even in dark places by slowing the shutter speed. ≥ The shutter speed is 1/30 or more depending on the ambient brightness. (The shutter speed is 1/24 or more when the [REC FORMAT] is set to [1080/24p]) ≥When the shutter speed becomes 1/30, the screen may be seen as if frames are missed and after images may appear. Recording motion pictures with mo re vivid colors, using x.v.Color ™ technology. ≥ Switch to manual mode. ( l46) ≥ For more realistic colors, use an HDMI cable (optional) with a TV that supports the x.v.Color ™. ≥When motion pictures recorded while this function is turned [ON] are played back with a TV not compatible with x.v.Color™, colors may not be reproduced properly. ≥ When these images are played back with devices other than ones compatible with x.v.Color ™, it is recommended to record the images after this function is turned [OFF]. ≥ x.v.Color™ is a name for devices that are compatible with the xvYCC format, an international standard for expanded color in motion pictures, and that follow the rules for signal transmission. [HYBRID O.I.S.] [ON]/[OFF] [AUTO SLOW SHTR] [ON]/[OFF] [Digital Cinema Color] [ON]/[OFF] HDC-Z10000P-VQT3U98_mst.book 119 ページ ２０１１年１０月１７日 月曜日 午後２時２４分
120VQT3U98 This will reduce the wind noise coming into the built-in microphones while maintaining the realism. ≥ Set the [MIC SETUP] to anything other than [2ch]. ( l57) ≥You may not see the full effect depending on the recording conditions. Switches the sound quality for the audio recording. ( l58) Recording setting of the built-in microphone can be adjusted. ( l57) When recording, the input level from the built-in microphones can be adjusted. ( l61) [WIND NOISE CANCELER] [ON]/[OFF] [AUDIO REC] []/[LPCM] [MIC SETUP] [SURROUND]/[ZOOM MIC]/[FOCUS MIC]/[2ch] [5.1ch MIC LEVEL] [AUTO]/[SET]/[SET r] HDC-Z10000P-VQT3U98_mst.book 120 ページ ２０１１年１０月１７日 月曜日 午後２時２４分