Panasonic Hdc Z10000 Owners Manual

							121VQT3U98
Change the lower setting of the built-in microphone (5.1 ch) according to your choice.
≥Set the [MIC SETUP] to [SURROUND] or [ZOOM MIC]. ( l57)
≥ Normally set to [0dB].
≥ Select [+3dB] or [+6dB] to get strong power feeling at bass level.
≥ Set [MIC SETUP] to [2ch]. ( l57)
Distortion of the sound can be reduced when the built-in microphone (2 ch) or external 
microphone is used by setting to [ON]. (  is displayed on the recording screen) It will 
record with natural sound when set to [OFF].
≥ Adjust the audio control knobs (CH1, CH2) to adjust the audio input level.
Sets the input level of the external microphone  connected to the audio input terminal 1 (XLR 
3 pin).
Sets the input level of the external microphone  connected to the audio input terminal 2 (XLR 
3 pin).
[BASS SETTING]
[0dB]/[+3dB]/[+6dB]/[LOWCUT]
[2ch MIC ALC]
[ON]/[OFF]
[EXT. MIC GAIN1]
[-50dB]/[-60dB]
[EXT. MIC GAIN2]
[-50dB]/[-60dB]
HDC-Z10000P-VQT3U98_mst.book  121 ページ  ２０１１年１０月１７日　月曜日　午後２時２４分 
						

							122VQT3U98
Switch and display setting
Menu items displayed are different depending on the position or setting of the mode switch.
[SD CARD 1] and [SD CARD 2] can be selected separately to record motion pictures or still 
pictures. (l35)
Sets the rotation direction and iris control of the iris ring.
≥ Switch to manual mode. ( l46)
Sets the function to assign to the USER buttons. ( l67)
Switches the display of the set USER button icons. ( l68)
Selects the brightness level of the left-leaning zebra patterns on the screen.
1 Touch [ZEBRA DETECT 1].≥ Touch [YES].2 Touch  /  to adjust settings.
3 Touch [ENTER].
≥Touch [EXIT] to exit the menu screen. : [SW & DISP SETUP]
 # desired setting
[MEDIA SELECT]
[IRIS RING]
[DOWN OPEN]: Iris will open when it is turned toward B.
[UP OPEN]: Iris will open when it is turned toward A.
1Iris ring
[USER BUTTON SETUP]
[USER BUTTON DISPLAY]
[ON]/[OFF]
[ZEBRA DETECT 1]
MENU
A
B A
B

HDC-Z10000P-VQT3U98_mst.book  122 ページ  ２０１１年１０月１７日　月曜日　午後２時２４分 
						

							123VQT3U98
Selects the brightness level of the right-leaning zebra patterns on the screen.1 Touch [ZEBRA DETECT 2].≥Touch [SET].2 Touch  /  to adjust settings.
3 Touch [ENTER].
≥Touch [EXIT] to exit the menu screen.
≥ Zebra 2 can be displayed by pressing the ZEBRA button after setting. (l 76)
Displaying of the luminance level display marker can be switched.
≥ Marker can be displayed by pressing ZEBRA button when set to [ON]. ( l76)
≥ The range of the 3D guide display is switched in accordance with the screen size assumed 
for playback. ( l41)
You can check if the image is  level while recording motion pictures and still pictures. The 
function can also be used to estimate the balance of the composition.
≥ The guidelines do not appear on the images actually recorded.
≥When Focus Assist is set to on, the following occurs.
jThe guidelines are not displayed. (these  are displayed on the TV when this unit is 
connected to TV.)
j The setting cannot be changed.
Display of the range that can be displayed with the common household TV (safety zone) can 
be switched.
≥ The safety zone is not displayed on the images that is actually recorded.
[ZEBRA DETECT 2]
[SET]/[OFF]
[MARKER]
[ON]/[OFF]
[3D GUIDE]
[MODE1]/[MODE2]
[GUIDE LINES]
[OFF]/ / /
[SAFETY ZONE]
[90%]/[OFF]
HDC-Z10000P-VQT3U98_mst.book  123 ページ  ２０１１年１０月１７日　月曜日　午後２時２４分 
						

							124VQT3U98
Selects the operation of the Recording Counter during recording. (l66)
The information displayed on the screen (operation icon and counter display etc.) can be 
displayed/not displayed on the TV. ( l89)
It is possible to change the date and time display mode.
≥ You can also show or change the date and time display by repeatedly pressing the DATE/
TIME button on the wireless remote control.
It is possible to change the date format.
≥ (In Playback Mode)
Change the mode to   and touch the play mode select icon. 
Then, set [VIDEO/PICTURE] to [3D] or [2D]. ( l79)
Select to display the audio level meter.
It is possible to display/not-display the convergence point and 3D guide display.
≥ The 3D guide display can be displayed by pressing the 3D GUIDE button even if this is set 
to [OFF]. ( l41)
[REC COUNTER]
[TOTAL]/[SCENE]
[VIDEO OUT OSD]
[ON]/[OFF]
[DATE/TIME]
[OFF]/[TIME]/[DATE]/[DATE&TIME]
[DATE FORMAT]
[Y/M/D]/[M/D/Y]/[D/M/Y]
[LEVEL METER]
[ON]/[OFF]
[CONVERGENCE]
[ON]/[OFF]
HDC-Z10000P-VQT3U98_mst.book  124 ページ  ２０１１年１０月１７日　月曜日　午後２時２４分 
						

							125VQT3U98
Display relating to lens can be switched. (Zoom Display, Optical Image Stabilizer, Focus 
Display, White Balance, Iris, Gain, Auto Iris, Shutter Speed, 3D Macro)
Display can be switched between the remaining  recordable time of the SD card and the 
remaining battery capacity indication.
Display which remains displayed even when  [USER BUTTON DISPLAY], [GUIDE LINES], 
[SAFETY ZONE], [DATE/TIME], [LEVEL METER], [CONVERGENCE], [LENS STATUS] and 
[CARD&BATTERY] are set to [OFF] can be switched.
Detected faces appear with frames.
≥ Up to 15 frames are indicated. Larger faces and faces nearer to the center of the screen 
take preference over others.
∫ Prioritized face framing
Prioritized face framing is displayed as orang e frames. Focus and adjustment of brightness 
will be performed against the prioritized face framing.
≥ Prioritized face framing is only displayed with Portrait Mode in the Intelligent Auto Mode.
≥ The white frame is for face detection only.
≥It cannot be set while in the Interval Recording is used.
≥ In 3D Recording Mode, prioritized face framing is not displayed in following cases:
j3D display is set to 3D display or MIX display ( l72)
j It is set to R-Image ( l72)
j During 3D display on a connected TV ( l91)
[LENS STATUS]
[ON]/[OFF]
[CARD&BATTERY]
[ON]/[OFF]
[OTHER DISPLAY]
[ON]/[OFF]
[FACE FRAMING]
[OFF]:
Cancel the setting.
[PRIMARY]:
Only the prioritized face framing is displayed.
[ALL]:
All face detection framings are displayed.
HDC-Z10000P-VQT3U98_mst.book  125 ページ  ２０１１年１０月１７日　月曜日　午後２時２４分 
						

							126VQT3U98
This makes it easier to view the LCD monitor in bright places including outdoors. (l27)
It adjusts brightness and color density on the LCD monitor. ( l27)
Brightness of the viewfinder can be switched. ( l28)
Switches the mirror function of the LCD monitor when recording yourself. ( l28)
The image on the LCD monitor is displayed mirrored horizontally during recording of yourself 
when it is set to [MIRROR].
The recording images or playback images on the viewfinder can be selected between color/
black and white. (l 28)
Enable/disable of the sub recording start/stop button on the handle can be switched.
Enable/disable of the sub zoom lever on the handle can be switched. Zoom speed will be 
different depending on the setting.
[POWER LCD]
[ON]/[OFF]
[LCD SET]
[EVF SET]
[BRIGHT]/[NORMAL]/[DARK]
[SELF SHOOT]
[MIRROR]/[NORMAL]
[EVF COLOR]
[ON]/[OFF]
[SUB REC BUTTON]
[ON]: The sub recording start/stop button is enabled.
[OFF]: The sub recording start/stop button is disabled.
[SUB ZOOM]
[OFF]:Sub zoom lever is disabled.
[LOW]:Sub zoom lever is enabled. (Zoom speed: Slow)
[MID]:Sub zoom lever is enabled. (Zoom speed: Standard)
[HIGH]:Sub zoom lever is enabled. (Zoom speed: Fast)
HDC-Z10000P-VQT3U98_mst.book  126 ページ  ２０１１年１０月１７日　月曜日　午後２時２４分 
						

							127VQT3U98
Other Functions
Menu items displayed are different depending on the position or setting of the mode switch.
The SD card can be formatted. (l34)
≥ Please be aware that if a medium is formatted , then all the data recorded on the medium 
will be erased and cannot be restored. Back up important data on a PC, disc etc. ( l93)
The used space and remaining recordable time of the SD card can be checked.
≥ Touching [CHANGE MEDIA] switches the unit between the display for the SD card 1 and 
the display for the SD card 2.
≥ When the mode switch is set to  , remaining  recordable time for the selected recording 
mode is displayed.
≥ Touch [EXIT] to close the indication.
≥The SD card requires some space to store information and manage system files, so the 
actual usable space is slightly less than the indicated value. The usable space is generally 
calculated as 1 GB=1,000,000,000 bytes. The capacities of this unit, PCs and software are 
expressed as 1 GB=1,024k 1,024k1,024=1,073,741,824 bytes. Therefore, the indicated 
value of the capacity appears to be smaller.
The wireless remote control (supplied) can be used. ( l31)
The recording lamp lights up during recording and flashes when the unit receives a signal 
from the wireless remote control. When this is set to [OFF], it does not light during recording. : [OTHER FUNCTION]
 # desired setting
[FORMAT CARD]
[CARD STATUS]
[REMOTE CONTROL]
[ON]/[OFF]
[REC LAMP]
[ON]/[OFF]
MENU
HDC-Z10000P-VQT3U98_mst.book  127 ページ  ２０１１年１０月１７日　月曜日　午後２時２４分 
						

							128VQT3U98
Set date and time. (l29)
Set the time difference from Greenwich Mean Time. ( l29)
Touch screen operation, start and stop of recording can be confirmed with this sound.
2 Beeps for 4 times
When an error occurs. Check the sentence displayed on the screen. ( l134)
When about 5 minutes have passed without any operation, this unit automatically turns off to 
save battery life.
≥ This unit will not automatically turn off even if  the [ECONOMY (BATT)] is set to [ON] in 
following cases:
j using the USB cable for PC etc.
j PRE-REC is used
When connected to AC adaptor about 30 minutes have passed without any operation, this 
unit automatically turns off.
≥ This unit will not automatically turn off even if the [ECONOMY (AC)] is set to [ON] in 
following cases:
jusing the USB cable for PC etc.
j PRE-REC is used
[CLOCK SET]
[TIME ZONE]
[ALERT SOUND]
[OFF]/  (Volume low)/  (Volume high)
[ECONOMY (BATT)]
[ON]/[OFF]
[ECONOMY (AC)]
[ON]/[OFF]
HDC-Z10000P-VQT3U98_mst.book  128 ページ  ２０１１年１０月１７日　月曜日　午後２時２４分 
						

							129VQT3U98
The unit is put into recording pause approx. 2 second when the unit is turned on with the 
mode set to  .
≥Depending on the recording conditions, start time may be longer than 2 second.
≥ In the quick power on mode, the zoom magnification becomes 1 k.
Select the desired method of HDMI output. ( l90)
Destination of the 3D full high definition quality video can be switched. ( l92)
The output method of the 3D video can be switched. ( l91)
AV multi connector output setting can be changed. ( l90)
Output setting of the component terminal for the AV multi terminal can be changed. ( l90)
[QUICK POWER ON]
[ON]/[OFF]
[HDMI RESOLUTION]
[AUTO]/[1080p]/[1080i]/[480p]
[3D OUTPUT]
[LCD]/[HDMI]
[3D PLAYBACK]
[AUTO]/[3D]/[2D]
[AV MULTI]
[COMPONENT]/[AV OUT]
[COMPONENT OUT]
[480i]/[1080i]
HDC-Z10000P-VQT3U98_mst.book  129 ページ  ２０１１年１０月１７日　月曜日　午後２時２４分 
						

							130VQT3U98
The menu settings or [CUSTOMIZE SCENE] back to the default setting. (l110)
≥ Settings for [3D/2D REC MODE], [REC FORMAT], [MEDIA SELECT], [CLOCK SET] and 
[LANGUAGE] will not be changed.
Perform the touch screen calibration if a different object to the one touched is selected. 
( l 26)
Selects the sound heard through the headphones.
≥ When this unit is connected to a TV using t he HDMI cable (optional), audio at the time of 
the [RECORDING] setting is output even if this setting is set to [LIVE].
Vertical position, focus, and iris of the left and right lenses can be finely adjusted during the 
3D Recording Mode. ( l43)
You can select the language on the screen display and the menu screen.
[INITIAL SET]
[ALL]:This is for initializing all menus.
[SCENE]:This is for initializing the setting of customize scene.
[CALIBRATION]
[H/PHONE MODE]
[LIVE]:The sound which has been input from the microphone is output as 
is. This setting is selected when delays in the sound are 
annoying.
[RECORDING]:The sound in the status which is to be recorded (the sound 
synchronized with the images) is output.
[3D FINE]
[LANGUAGE]
HDC-Z10000P-VQT3U98_mst.book  130 ページ  ２０１１年１０月１７日　月曜日　午後２時２４分