Panasonic Hdc Z10000 Owners Manual

111VQT3U98
Adjusts the level of the image outline correction.1 Touch [DETAIL LEVEL].
2 Touch  /  to adjust settings.
3 Touch [EXIT] to exit the menu screen.
Adjusts the degree of vertical outline correction in images.1 Touch [V DETAIL LEVEL].
2 Touch  /  to adjust settings.
3 Touch [EXIT] to exit the menu screen.
Adjusts the level to eliminate the noise of the detail.1 Touch [DETAIL CORING].
2 Touch  /  to adjust settings.
≥Setting to  s direction gives crisp images but allows a slight increase in noise....

112VQT3U98
Adjustment of black level based on the image is performed.1 Touch [MASTER PED].
2 Touch  /  to adjust the black level.
3 Touch [EXIT] to exit the menu screen.
Adjusting brightness during the Auto Iris Mode. (l54)
Selects the DRS (Dynamic Range Stretcher) function.
It is possible to expand the dynamic range by compressing the video signal level of the highly 
illuminated area that gets washed out with standard recording.
1 Touch [DRS].
2 Touch the desired setting item.
≥ Higher the value,...

11 3VQT3U98
Tone or contrast of the image is set in accordance with the recorded scenes.1 Touch [GAMMA].
2 Touch the desired setting item.
≥Next (Previous) page can be displayed by touching  / .
≥ When you select [CINE-LIKE D] or [CINE-LIKE V], we recommend setting the iris darker 
than normal image for optimal results. ( l54)
3 Touch [EXIT] to exit the menu screen.
To avoid overexposure, select the compression level of the high intensity video signals 
received through the image sensor.
1 Touch [KNEE]....

114VQT3U98
Represents the color during the recording.1 Touch [MATRIX].
2 Touch the desired setting item.
3 Touch [EXIT] to exit the menu screen.
This makes skin colors appear softer for a more attractive appearance.
This is more effective if you record a person closely from the torso up.
1 Touch [SKIN TONE DTL].
2Touch [ON].
3 Touch [EXIT] to exit the menu screen.
≥If the background or anything else in the scene has colors similar to the skin color, they will 
also be smoothed.
≥ If the brightness is...

11 5VQT3U98
Recording Setup
Switch the Recording Mode to 3D or 2D. (l36)
Switch the picture quality of the motion pictures to record. The selectable recording format 
differ depending on the setting of [3D/2D REC MODE]. ( l36)
The frame rate and the recording method will vary depending on the recording format.
*1 Motion picture recorded in [1080/30p] is converted to 1080/60i.
*2 It will output with 1080/60i when this unit is connected to a TV with a HDMI cable  (optional). (Video will be recorded with...

116VQT3U98
≥Recordable time using the battery (l 20)
≥ This function’s default setting is [1080/60i] (3D Recording Mode)/[HA] (2D Recording 
Mode).
≥ Please refer to page 147 about approximate recordable time.
≥ When the unit is moved a lot or moved quickly, or when a fast-moving subject is recorded 
(particularly when recording in [HE] mode), mosaic-type noise may appear at playback.
You can set the relay recording and backup recording.
≥ Insert SD cards to card slot 1 and card slot 2.
∫ Relay...

11 7VQT3U98
A scene that moves slowly for long period of time is recorded frame by frame with an interval, 
and is recorded as a short time motion picture.
One frame is recorded every recording interval that is set. The scene of one second is made 
up by 30 frames.
≥Switch to manual mode. ( l46)
≥ Set [3D/2D REC MODE] to [2D]. ( l36)
≥  appears on the screen.
≥ After recording, the setting of interval recording is canceled.
≥ Audio cannot be recorded. (  It will be silent in 2 ch)
≥ Maximum recordable...

118VQT3U98
Sets the way the time code will move. (l64)
Initial value of the time code can be set. ( l65)
User Information can be set. ( l65)
It will switch to the recording screen and record the image and audio from 
approximately 3 seconds prior to pressing the recording start/stop button when [PRE-
REC] is touched.
≥  appears on the screen.
≥Aim the unit at the subject beforehand.
≥ There is no beep sound.
≥ PRE-REC is canceled in the following cases.
jIf you turn the unit off
j If you change the mode...

11 9VQT3U98
You can set the Hybrid Optical Image Stabilizer. (l50)
≥ This can only be selected when the [3D/2D REC MODE] is [2D].
You can record bright pictures even in dark places by slowing the shutter speed.
≥ The shutter speed is 1/30 or more depending on the ambient brightness.
(The shutter speed is 1/24 or more when the [REC FORMAT] is set to [1080/24p])
≥When the shutter speed becomes 1/30, the screen may be seen as if frames are missed 
and after images may appear.
Recording motion pictures with...

120VQT3U98
This will reduce the wind noise coming into the built-in microphones while maintaining the 
realism.
≥ Set the [MIC SETUP] to anything other than [2ch]. ( l57)
≥You may not see the full effect depending on the recording conditions.
Switches the sound quality for the audio recording. ( l58)
Recording setting of the built-in microphone can be adjusted. ( l57)
When recording, the input level from the built-in microphones can be adjusted. ( l61)
[WIND NOISE CANCELER]
[ON]/[OFF]
[AUDIO REC]...