Panasonic Hdc Z10000 Owners Manual

131VQT3U98
Video Setup
≥Change the mode to   and touch the play mode select icon. 
Then, set [VIDEO/PICTURE] to [3D] or [2D]. ( l79)
Playback of the first scene starts after playback of the last scene finishes when set to [ON]. 
( l 84)
If playback of a scene was stopped halfway, the playback can be resumed from where it was 
stopped when set to [ON]. ( l84)
Scenes can be protected so that they are not deleted by mistake.
(Even if you protect some scenes, formatting the SD card will delete them.) ( l87)...

132VQT3U98
∫Recording indications
Display
Indications
1/10099% â
OPENMF50 D  5X
Z00
0dB
PRE-RECR 1h20m
R 1h20m


NOV 15 20113:30:00PM
3D
C10  3D
60 i
TC 00:00:00:00
2.9
A
TC 00:00:00:00
Counter display ( l63)
PRE-REC ( l11 8 )
Interval recording ( l11 7 )
¥ /; (Red) Recording
; (Green) Recording pause
////
Intelligent Auto Mode ( l46)
Manual Mode ( l46)
Remaining battery power 
( l 20)
/ 
(White) Recording to card possible 
(motion picture)
/ 
(Green) Card is being recognized 
(motion picture)
R1h20m...

133VQT3U98
∫Playback indications ∫
Indication of connection to 
other devices
∫ Confirmatory indications
C
5.1 ch Microphone Level 
(ALC) ( l61)/
2 ch Microphone ALC 
( l 121)
Wind Noise Canceler 
( l 120)
C10/ 10 Convergence point ( l40)
3D 2.9 - ¶ ft
3D guide display ( l41)
AF50/MF50/ 00/ 00 Focus (
l51)
/ Audio recording format 
(l 58)
 (5.1 ch)/ (2 ch)
Audio level meter ( l62)
Auto iris mode ( l54)
Backlight Compensation 
( l 69)
Spotlight ( l70)
OPEN/F2.0 Iris value (l54)
Z00/ 99 Zoom magnification...

134VQT3U98
Major confirmation/error messages to be indicated on the screen in text.
Display
Messages
CHECK CARD.
This card is not compatible or it cannot be recognized by the unit.
If this message appears even though motion pictures and still pictures are recorded on an 
SD card, the card may be unstable. Reinsert the SD card, then turn the unit off and then 
on again.
INVALID/CANNOT SET.
Since there is a condition to use the function, it is required to cancel/change other 
settings....

135VQT3U98
∫It is not a malfunction in following cases
Others
Troubleshooting
A clicking sound is heard 
when the unit is shaken. ≥
This is the sound of the lens moving and is not a defect.
This sound will no longer be heard when the unit is turned 
on and change the mode to  .
Object seems to be 
warped. ≥
Object seems to be warped slightly when the object moves 
across the image very fast, but this is because the unit is 
using MOS for the image sensor. This is not a malfunction.
Power
ProblemCheck...

136VQT3U98
Indication
ProblemCheck points
Function display 
(Remaining Display, 
Counter Display, etc.) is 
not displayed ≥
[CARD&BATTERY] or [OTHER DISPLAY] of the 
[SW & DISP SETUP] is [OFF]. ( l125)
Recording
ProblemCheck points
The unit arbitrarily stops 
recording. ≥
Use an SD card that can be used for motion picture 
recording. ( l22)
≥ The recordable time may have shortened due to the 
deterioration of the data writing speed or repeated 
recording and deletion. Using the unit, format the SD 
card....

137VQT3U98
Playback
ProblemCheck points
Scenes/still pictures 
cannot be played back. ≥
Any scenes/still pictures where the thumbnails are 
displayed as   cannot be played back.
Scenes/still pictures 
cannot be deleted. ≥
Release the protect setting. (l 87)
≥ Any scenes/still pictures where the thumbnails are 
displayed as   cannot be deleted. If the scenes/still 
pictures are unnecessary, format the media to erase the 
data. ( l34) Please be aware that if a media is formatted 
then all the data recorded...

138VQT3U98
With a PC
ProblemCheck points
When connected by the 
USB cable, this unit is 
not detected by the PC. ≥
After re-inserting the SD card into the unit, reconnect the 
supplied USB cable.
≥ Select another USB terminal on the PC.
≥ Check the operating environment. (l 97, 105)
≥ Connect the supplied USB cable again after restarting the 
PC and turning on this unit again.
When the USB cable is 
disconnected, an error 
message will appear on 
the PC. ≥
To disconnect the USB cable safely, double-click...

139VQT3U98
∫If scenes do not change smoothly when played back on another 
device
The images may be still for several seconds at  the joins between the scenes if the following 
operations are performed when multiple scenes have been continuously played back using 
another unit.
≥ Just how smoothly the scenes will be play ed back depends on the playback unit. 
Depending on the unit used, the images may stop moving and become still for a moment 
even when none of the following conditions are applicable.
≥ A...

140VQT3U98
Keep this unit as far away as possible 
from electromagnetic equipment (such 
as microwave ovens, TVs, video games 
etc.).
≥If you use this unit on top of or near a TV, 
the pictures and/or sound on this unit may 
be disrupted by electromagnetic wave 
radiation.
≥ Do not use this unit near cell phones 
because doing so may result in noise 
adversely affecting the pictures and/or 
sound.
≥ Recorded data may be damaged, or 
pictures may be distorted, by strong 
magnetic fields created by...