Panasonic Hd Integrated Camera Aw He60h Vol2 Operating Instructions

							31
Genlock adjustment (AW‑HE60S onl\f)(continued)
When performing the operatio\pns using the contr\poller
These operations can be performed using the camera 
menus by following the operation steps in “Basic operations” 
(pages 32 to 39).
To switch between “B\bR” (color bar display) and “C\bM” 
(camera pictures), press t\ehe [MOD\f] or [B\bR/C\b\eM] button. 
						

							32
Basic operations
Camera menus are displayed on the monitor w\ehen the unit’s 
settings are to be s\eelected.
The monitor is conn\eected to the video s\eignal output 
connector.
The basic camera menu operations involve displaying 
sub-menus from the Top Menu items, and selecting sett\eings 
on the sub-menus.
Some sub-menus have menu items for performing more 
detailed settings.
The camera menu operations are conducte\ed using the 
wireless remote contr\eol.
If a controller is c\eonnected, they can also be condu\ected using 
the controller.p
 It may be necessary to upgrade the controller’s version in 
order to support the \bW -H\f60.
For further details, consult with your dealer.
Described below are the basic oper\eations for changing the 
camera menu item settings usi\eng the wireless remot\ee control 
and controller (\bW -RP655, \bW-RP555 or \bW -RP50).Onl\f the steps taken u\psing the wireless r\pemote 
control will be described\p here for the operations 
conducted to select\p and set the items\p.
For details of the \poperations conducte\pd using the 
controller, substitute “controller” for “wireless 
remote control” when reading the \pbasic operations.
Also, refer to the Operating\p Instructions of t\phe 
controller.
Table of operations
Camera menu 
operation Wireless remote 
control Controller
AW‑RP655 AW‑RP555 AW‑RP50
Selecting the 
unit to be 
operated Press the [C\bM1], 
[C\bM2], [C\bM3] or 
[C\bM4] button. Press one of the [1]\e to [5] 
buttons of [CONTROL/
PR\fVI\fW MONITOR OUT 
S\fL].
Press one of the [1]\e to [5] 
buttons of [CONTROL].
Press one of the [C\b\eM\fR\b 
ST\bTUS/S\fL\fCTION] buttons.
Displa\fing the 
Top \benu Press the [M\fNU] 
button for 2 seconds. 1.
   Press the [M\fNU] button.  
The display on the 
\bW -RP655’s LCD panel 
changes to the menu mode.
2.    Turn the jog dial (mai\en) 
to display “C\bM\fR\b 
S\fTTING” on the LCD 
panel, and press the \e[OK] 
button.
3.    The scene selection m\eenu 
now appears on the LCD\e 
panel so select the sc\eene to 
be set, and press th\ee [OK] 
button.
4.    If the “OP\fN C\bM\fR\b 
M\fNU?  OK Key” 
message appears on th\ee 
LCD panel, press the \e[OK] 
button again. Press the [M\fNU] button for 
2 seconds.
Press the [C\bM\fR\b OSD\e] 
button for 2 seconds.
Selecting the 
items Press  the  []  or  [] 
([] or []) button.
Turn the jog dial (mai\en).
Press the [Y\fS] or [\eNO] button.Turn the F1 dial.
Displa\fing the 
sub‑menus Press the [] button.
Press the jog dial (\emain).
Press the [IT\fM] button.Press the F1 dial. 
						

							33
Basic operations(continued)
Camera menu operation Wireless remote 
control Controller
AW‑RP655 AW‑RP555 AW‑RP50
Returning to the 
previous menu With the cursor at \e
the [Return] position, 
press the [] button. With the cursor at \ethe [Return] 
position, press the \ejog dial 
(main). With the cursor at \ethe [Return] 
position, press the \e[IT\fM] 
button.
With the cursor at \ethe [Return] 
position, press the \eF1 dial.
Changing the 
settings With the cursor at \ethe 
item to be changed, \e
press the [] button to 
start the item’s value 
blinking.
Use the [], [], [] 
and [] buttons to 
change the value, and 
press the [] button to 
enter the change. 1.
   Press the jog dial (\emain) to 
start the setting blinking.
2.    Turn the jog dial (mai\en) to 
change the setting.
3.    Press the jog dial (\emain) to 
enter the setting (a\end stop 
the blinking). 1.
   Press the [IT\fM] button to 
start the setting blinking.
2.    Press the [Y\fS] or [\eNO] 
button to change the\e setting.
3.    Press the [IT\fM] button to 
enter the setting (a\end stop 
the blinking). 1.
   Press the F1 dial to\e start the 
setting blinking.
2.    Turn the F1 dial to ch\eange 
the setting.
3.    Press the F1 dial to\e enter 
the setting (and st\eop the 
blinking).
Canceling the 
setting change While the setting 
is blinking, press 
the [M\fNU] button 
quickly (for less than 
2 seconds). While the setting is\e blinking, 
press the jog dial (\eR).
While the setting is\e blinking, 
press the [M\fNU] button.
—
Exiting the 
camera menu 
operations Press the [M\fNU] 
button for 2 seconds.
Press the [M\fNU] button or 
[R/B G\bIN/P\fD] button. Press the [M\fNU] button for 
2 seconds.Press the [C\bM\fR\b OSD\e] 
button for 2 seconds.
p
 Perform the menu operations and exit from the menus using the contro\eller which displayed the Top Menu.
If a menu operation has been performed or a menu has been exited using another\e controller, first display the Top Menu 
and exit from it using \eone controller, and then display the Top Menu and exit from it using \ethe other controller.
p
 The unit uses a dif\eferent method to operate its menus from the one emplo\eyed by the convertible cameras (except for the 
\bW -H\f870) and HD integ\erated cameras which have already been launch\eed onto the market.  
For details, refer to the Operating Instructions of the came\era concerned.
p
 The response speed of \ethe camera differs slightly dependin\eg on the controller \eused.
Notes 
						

							34
Basic operations(continued)
p
w When performing the 
operations using th\pe wireless 
remote control
1	Press the [CA\b1], [CA\b2], [CA\b3] or [CA\b4] 
button to select the\p unit which is to be 
operated.
2	Press the [\bENU] button for 2 seconds.
The Top Menu is displayed.
3	Press the [] or [] button to bring the\p cursor 
to the item to be \pselected.
\fach time the [] or [] button is pressed, th\ee cursor 
moves.
The cursor can be m\eoved in the same way using the [] 
and [] buttons.
4	Press the [] button.
The sub-menu of the selected ite\em is displayed.
(Some sub-menu items have a sub-menu of their own.)
5	Press the [] or [] button to bring the\p cursor 
to the item to be \pset.
\fach time the [] or [] button is pressed, th\ee cursor 
moves.
The cursor can be m\eoved in the same way using the [] 
and [] buttons.
With the cursor at \ethe “Return” position, press the\e [] 
button to return to the previous menu.
6	Press the [] button.
The value of the item to \ebe set starts blinking.
7	Press the [] or [] button to change the 
setting.
The setting can be c\ehanged in the same w\eay using the 
[] and [] buttons.
8	Press the [] button.
The value of the item to \ebe set is entered, an\ed it stops 
blinking.
9	After the setting \phas been completed,\p press the 
[\bENU] button for 2 seconds.
The camera menu display is exited. 
						

							35
Basic operations(continued)
p
w Control exercised from the \bulti‑Function Controller AW‑RP655
For executing AWB. 
*1, *2
Jog dial (main)When the LCD is in\p the gain adjustme\pnt 
mode ([GAIN] button: \bANU)
   Select the desired ga\ein setting from G\bI\eN 
0 dB to 18 dB. *5
When the LCD is in\p the gain adjustme\pnt 
mode ([GAIN] button: AUTO)
    Select the desired ga\ein setting from \bGC M\bX 
G\bIN 6 dB, 12 dB or 18 dB.
When the LCD is in\p the pedestal adjus\ptment 
mode
    \bdjust the P\fD\fST\bL TOT\bL setting (–150 to\e 
+150). *6
When the camera me\pnu mode is established
  Perform the camera menu operations.
For switching WHITE BAL A, 
B or ATW.
This is used to switch between AUTO and 
\bANU for the gain. The [GAIN] button 
lights when the AUTO setting is select\ped.
These are used for menu 
operation.This is used to switch 
between the Da\f mode 
and Night mode.
For selecting the 
cameras to be opera\pted.
Each time the [EXT(AF\p)] 
button is pressed, 
the focus setting is 
switched between auto 
focus and manual focus.
When auto focus is 
selected, the [EXT(AF)] 
button lights.
When the focus setting 
is switched between 
auto focusing and 
manual focusing b\f the 
camera, the resulting 
status (lamp on or \poff) 
will not be reflecte\pd in 
the button.
The unit does not \phave 
an ABC function.
This is used to ac\pquire the 
statuses of the ca\pmera and 
s\fnchronize the data. *3
Each time the [\bODE] b\putton is pressed, the 
setting is switched between CA\b and\p BAR.
The [\bODE] button lights up at \pthe BAR setting.
Jog dial (R)When the LCD is in\p the camera 
menu mode
    Press the jog dial (\eR) to cancel the 
setting change.
When the LCD is in\p the gain 
adjustment mode
    \bdjust the B G\bIN se\etting (–150 to 
+150). *4, *7Jog dial (L)When the LCD is in\p the gain 
adjustment mode
   \bdjust the R G\bIN se\etting (–150 to 
+150). *4, *7
*1:    The AWC switch indicator blinks while the whi\pte 
balance is being ad\pjusted.  
When AWB is completed suc\pcessfull\f, the lamp 
goes off; when it is not co\pmpleted successfull\f, it 
lights up.
*2:    The switch lights without AWB being executed when 
the white balance m\pode of the main un\pit is ATW, or 
when the Color Bar \pis being displa\fed.
*3:    SCENE FILE, CA\b/BAR, and GAINUP of eac\ph 
SCENE, as well as the W/B \bODE statuses a\pre 
s\fnchronized.
*4:    The R gain and B gain cannot be adj\pusted if ATW is 
used as the White Balance \bode \psetting. *5:
   With this unit, the gain setting \pis reflected in 
increments of 3 dB in the control.
*6:    With this unit, the setting is re\pflected in incremen\pts 
of 15 dB in the control.  
On the camera menu, the setting is ad\pjusted in 
range from –10 to +10.
*7:    With this unit, the setting is re\pflected in incremen\pts 
of 5 dB in the control.  
On the camera menu, the setting is ad\pjusted in 
range from –30 to +30. 
						

							36
Basic operations(continued)
p
q Procedure for camera menu operation 
(AW‑RP655)
1	Press one of the [\p1] to [5] buttons of 
[CONTROL/PREVIEW \bONITOR OUT SEL] to 
select the unit whi\pch is to be operated\p.
2	Press the [\bENU] button to set the L\pCD panel 
displa\f to the menu mode.
3	Turn the jog dial (m\pain) until CA\bERA SE\pTTING 
appears, and press the [OK]\p button.
CAMERA SETTING
            OK Key\
4	When the scene sele\pction menu has appeared 
on the LCD panel, select the scene t\po be set, 
and press the [OK] \pbutton.
SCENE        HALOG\
EN
            OK Key\
The scene names displ\eayed on the LCD panel c\eorrelate 
with the scene files \eof the \bW -H\f60 as shown below.
AW‑RP655 displa\f AW‑HE60 scene file
H\bLOG\fN Manual1
FLUOR\fSC\fNT Manual2
OUTDOOR Manual3
US\fR Full\buto
5	When the following message appears on the 
LCD panel, press the [OK] button again.
OPEN CAMERA MENU ?\
            OK Key\
The camera menu of the \bW-H\f60 is displayed on the 
monitor.
6	Turn the jog dial (m\pain) to select came\pra menu 
items of the AW‑HE60 and change the data.
Turn the jog dial (mai\en) when the cursor \eis to be moved 
up or down or the settings \eare to be changed.
Press it when moving to the menu at the next lower 
hierarchical level or changing a setting at the very bottom 
hierarchical level.
7	Press the [\bENU] button to exit the camera 
menu.
p
 Genlock is set using the c\eamera menu for the 
\bW -H\f60.
p
 It may be necessary to upgrade the software version 
in order to operate an \bW -H\f60 from an \bW-RP655. 
\bsk your dealer for details.
Notes 
						

							37
Basic operations(continued)
p
w Control exercised from the \bulti H\fbrid Control Panel AW‑RP555
This is used to switch between the 
Da\f mode and Night mo\pde.
For switching the SCENE file \p
(FullAuto, \banual1 to 3).
For operating the c\pamera menus.
M\fNU:    This operates in the same 
way as M\fNU on the 
camera.
IT\fM:    This operates in the same 
way as \fNT\fR on the 
camera.
Y\fS:    This operates in the same 
way as UP on the came\era.
NO:     This operates in the same 
way as DOWN on the 
camera.
For selecting the c\pameras to be 
operated.
For switching the contrast \p
mode. *3
Each time the [(AF)EX\pT] button 
is pressed, the focus setting is 
switched between auto f\pocus and 
manual focus.
When auto focus is selected, the 
[(AF)EXT] button lights.
When the focus setting is 
switched between auto f\pocusing 
and manual focusing b\f the 
camera, the resulting stat\pus (lamp 
on or off) will not\p be reflected in 
the button.
Each time the [\bODE] b\putton is 
pressed, the setting is switched 
between CA\b and BAR.
The [\bODE] button lights up at \pthe 
BAR setting.
Each time the [GAIN] \pbutton is 
pressed, the setting is switched in 
the sequence of GA\pIN AUTO  
0dB  L (9dB)  H (18dB), and the 
mode is displa\fed b\f the LEDs as 
shown below.
[ON: LED lights; OFF: LED off]
GAIN
button \bANU L 
LED \bANU H 
LED
AUTO ONOFF OFF
0dB OFF OFFOFF
LOW OFF ONOFF
HIGH OFFOFF ON
Others OFFONON
Shutter mode selecti\pon
\fach time this button is pressed, on\ee of the shutter 
modes set by the controller or \e“shutter OFF” is 
selected.
The [SHUTT\fR] button lights up in \eall modes except 
shutter OFF.
The shutter mode set\etings established by the 
[PR\fS\fT] buttons are as follows.
\bODE PRESET 
No. \bODE PRESET 
No.
1/100**
11/120**2PR\fS\fT1 1/4000
PR\fS\fT6
1/10000 PR\fS\fT7
1/250 PR\fS\fT2
SYNCHRO- 
SC\bN PR\fS\fT8
1/500 PR\fS\fT3
1/1000 PR\fS\fT4 \fLCPR\fS\fT9
1/2000 PR\fS\fT5 OFFPR\fS\fT10
**1:    “1/100” when 59.94 Hz is selected as th\ee frequency setting \e
of the \bW -H\f60.
**2:    “1/120” when 50 Hz is selected as th\ee frequency setting \eof 
the \bW -H\f60.
For switching WHITE BAL A, 
B or ATW. *4
For executing AWB. *1, *2
The unit does not \phave 
an ABC function.
*1:   The lamp of the AWC switch flashes while aut\pomatic 
white balance is be\ping executed.  
When AWB is completed suc\pcessfull\f, the lamp 
goes off; when it is not co\pmpleted successfull\f, it 
lights up.
*2:    The switch lights without AWB being executed when 
the white balance m\pode of the main un\pit is ATW, or 
when the Color Bar \pis being displa\fed. *3:
   The contrast level can be adjusted\p in the AUTO 
mode.
*4:    There is a dela\f in the switching of the displa\f when 
the settings are c\phanged on the camera. 
						

							38
Basic operations(continued)
p
q Procedure for camera menu operation 
(AW‑RP555)
1	Press one of the [\p1] to [5] buttons of 
[CONTROL] to select the u\pnit which is to be 
operated.
2	Press the [\bENU] button of the AW‑RP555 for 
2 seconds.
The camera menu of the \bW -H\f60 is displayed on the 
monitor.
3	Perform one of the following steps to selec\pt the 
menu item.
If the [Y\fS] button is pressed, th\ee selection item moves 
up; if the [NO] button is pressed, it\e moves down.
4	Press the [ITE\b] button.
The value of the item to \ebe set starts blinking.
5	Press the [YES] or \p[NO] button to change the 
setting.
6	After deciding on \pthe setting, press the [ITE\b] 
button.
The value of the item to \ebe set is entered, an\ed it stops 
blinking.
7	Press the [\bENU] button for 2 seconds to exit 
the camera menu.
p
 It may be necessary to upgrade the software version 
in order to operate an \bW -H\f60 from an \bW-RP555. 
\bsk your dealer for details.
Note 
						

							39
Basic operations(continued)
p
w Control exercised from the Remote Camera Cont\proller AW‑RP50
POWER ALARM F1CAMERA
OSD
R/B GAIN R/B PED
SYSTEM
SETUP
CAMERA
SCENE/MODEDETAILDELETE
STORE PAGE
MENU F2EXIT
USER2
USER1
PT ACTIVE
AUTO
IRIS
AUTO
HI
LOWPTZ/FOCUS SPEED
FOCUS/PUSH OAF
TELE
ZOOM WIDE
CAMERA STATUS / SELECTION
PRESET MEMORY / MENU
GAIN/PED
F2 F1
1 23
AWB/ABB
4
SHUTTER
5
1 23 45
6
78 910
For operating the c\pamera menus.
C\bM\fR\b OSD:
   When this is pressed\e for 
2 seconds, the selected camera 
menu is displayed, overlapping 
the camera output image.  
When it is pressed f\eor 
2 seconds while a came\era 
menu is displayed, the menu is 
cleared.
F1:    Turn F1 to move the cursor up 
or down on the camera menu or 
change the setting.  
Press it when moving to 
the menu at the next lower 
hierarchical level or changing 
a setting at the very bottom 
hierarchical level.
For selecting the c\pameras to be operat\ped.
p
q Procedure for camera menu operation (AW‑RP50)
1	Press one of the [\pCA\bERA STATUS/
SELECTION] buttons to select th\pe unit which 
is to be operated.
2	Press the [CA\bERA O\pSD] button of the 
AW‑RP50 for 2 seconds.
The camera menu of the \bW -H\f60 is displayed on the 
monitor.
3	Turn the F1 dial to \pselect the AW‑HE60 camera 
menu item or change the data.
Turn the F1 dial to mo\eve the cursor up or d\eown or 
change the setting.
Press it to move to the menu at the next lower 
hierarchical level or change a blinking setting at t\ehe very 
bottom hierarchical level.
 
4	Press the [CA\bERA OSD] button for 2 seconds 
to exit the camera men\pu. 
						

							40
Camera menu items
p
w Setting the camera \pmenu items
When the unit’s settings are to b\ee selected, the camera 
menus are displayed on the monitor.
The monitor is conn\eected to the video s\eignal output 
connector.
The basic camera menu operations involve displaying 
sub-menus from the Top Menu items, and selecting sett\eings 
on the sub-menus.
Some sub-menus have menu items for performing more 
detailed settings.
For details on the ba\esic operations to display the camera 
menus and change the i\etems using the wirel\eess remote 
control or controlle\er (\bW -RP655, \bW-RP555 or \bW -RP50), 
refer to pages 32 to 39.
The “
” and “” marks in the menu titles indicate th\ee 
hierarchical level of the menu currently displayed.
For instance, “
” indicates the firs\et 
hierarchical level whereas “
” and 
“
” indicate that the \esecond hierarchical 
level is now displayed.
Menu items accompanied \eby a “
” mark indicate data 
which is stored on \ea scene by scene basis; menu items 
accompanied by a “
” mark indicate data whic\eh is stored 
together for one camera regardless of the \escenes.
p
w Top \benu screen
      T o p   M e n u  
  C a m e r a         S c e n e :   F u l l A u t o  S \f s t e m  M a i n t e n a n c e
Camera
Select this to open t\ehe camera menu relating to the 
camera images.
S\fstem
Select this to displa\ey the System menu used to adjust th\ee 
genlock (external synchronization\e) phase or establish the 
camera output image setti\engs.
\baintenance
Display the Maintenance me\enu which concerns checking 
the unit’s firmware versions, checking the IP address \eand 
initialize the settings.
p
 The Top Menu does not have a “Return” setting.  
To close the menu screen, use the co\entroller to 
perform the operation to close the m\eenu screen.  
For details, refer to pages 32 to 39.
Note