Panasonic Hd Integrated Camera Aw He60h Vol2 Operating Instructions

Operating Instructions

HD Integrated Camera
VQT4M09A(E)M0712MS0 -FJ
ENGLISH
	 How	the	Operating	Instructions	are	configured
 :
      The  describes the procedure for basic operation and installation. Before installing this unit, be 
sure to take the time to read through  to ensure that the unit will be installed correctly.
   (this manual):
    This  describes how to operate the unit and how to establish its settings.
  Model No.
 AW‑HE60HN
  Model No.
 AW‑HE60SN
  Model No.
 AW‑HE60HE
  Model No....

2
Trademarks and regi\pstered trademarks
p
 Microsoft®, Windows®, Windows® 7, Internet \fxplorer®, 
\bctiveX® and DirectX® are either registere\ed trademarks or 
trademarks of Microsoft Cor\eporation in the United\e States 
and other countries.
p
 Intel
® and Intel® CoreTM are trademarks or registered 
trademarks of Intel Corporation in the United\e States and 
other countries.
p
 \bdobe
® and Reader® are either registere\ed trademarks or 
trademarks of \bdobe Systems I\encorporated in the United...

3
Contents
Before use ..................\p..................\p..................\p..................\p... 4
Overview  ..................\e..................\e..................\e..................\e.. 4
Required personal com\eputer environment  ..................\e.....4
Disclaimer of warranty ..................\e..................\e..................\e 5
Network security  ..................\e..................\e..................\e........ 5
Concerning the plug-in vie\ewer software...

4
Before use
p
w Overview
p
 This unit is a com\epact full HD camera integrated with a 
pan-tilt head and featuring a 1/3-type full \eHD MOS sensor 
and digital signal \eprocessor (DSP).
p
 In addition to its\e optical 18 zoom lens, the unit comes 
with a 10 digital zoom to achieve high-quality shoo\eting 
that overflows with ambiance.
p
 The unit features a night mode, making it possible to shoot 
even under very-low-brightness conditions\e by exposing 
subjects to infrared rays.
p
 Two models are...

5
Before use(continued)
I\bPORTANT
p
 Failure to provide the required p\personal computer 
environment ma\f slow down the delineation \pof 
the images on the screen, make it impossible for 
the web browser to work and cause othe\pr kinds of 
problems.
p
 When using Microsof\et® Windows® 7, refer to the “Notes on 
Windows® 7” (page 105) for details on the personal computer 
environment that is r\eequired and on the p\erecautions and 
other items.
p
w Disclaimer of warrant\f
IN NO \fV\fNT SH\bLL...

6
Before use(continued)
p
w Concerning the plug\p‑in viewer 
software
p
 This is necessar\f onl\f when using a personal computer 
running Windows.
In order to display the IP videos on \ethis unit, the “Network 
Camera View4” plug-in viewer software must be installed.
\fither install the so\eftware directly from th\ee unit or click the 
[Install] button of the “plug-in viewer software” on the menu of 
the CD-ROM supplies, and follow the on-screen inst\eructions 
to install the softw\eare.
p
 When the...

7
Basic shooting oper\pations
1	Set the subject bri\pghtness to the appr\popriate 
level.
2	Turn on the power of all the unit\ps and devices 
in the s\fstem.
3	Select the unit to b\pe operated.
\fven when using only o\ene unit, it must still be selected \e
from the wireless rem\eote control or cont\eroller.
4	Select the shooting \pmode.
Select one of the four (Full\buto, Manual1, Manual2 and 
Manual3) preset shootin\eg modes (scene files)\e, each of 
which corresponds t\eo a set of circumst\eances in...

8
How to turn the power on and off
p
w Turning the power on
When performing the operatio\pns  
using the wireless \premote control
1	Set all the power switches of the units a\pnd 
devices connected in \pthe s\fstem to ON.
p
 This unit does not \ehave a power switch.  
When power is supplied to it,\e the status display lamp 
will light up orange.  
The initial operation is then performed, and after this\e 
the unit is set to \ethe standby mode.
2	Press one of the [\pCA\b1] to [CA\b4] buttons on 
the...

9
How to turn the power on and off(continued)
p
w Turning the power off
When performing the operatio\pns  
using the wireless \premote control
1	Press one of the [\pCA\b1] to [CA\b4] buttons on 
the wireless remote\p control to select the un\pit.
2	Press the [ON/STANDBY] button on the 
wireless remote con\ptrol for 2 seconds.
The unit’s power is turned off. p
 The unit’s status display lamp now lights up orange.
3	If a multiple number of units are\p going to be 
used, repeat steps 
1 and 2 as required....

10
Selecting the units
Up to four units can be op\eerated using one wirel\eess remote 
control.
Up to five units and devices can be operated using one 
controller.
Select the unit (or \eunits) to be operated from the wireles\es 
remote control or co\entroller.
\fven when using only o\ene unit, it must still be selected.\e
When performing the operatio\pns  
using the wireless \premote control
1	Press the [CA\b1], [CA\b2], [CA\b3] or [CA\b4] 
button.
The unit’s status display lamp blinks green when a...