Panasonic Hc Vx981 Hc Wx991Owners Manual

							- 31 -
∫
About the screen indications in  Still Picture Recording Mode
∫ About the focusing area
When there is a contrasting object ahead or behind the subject  in the focus area, the subject may 
not be focused. If so, move the contrasting object out of the f ocus area.
Recording still pictures in Motion Picture Recording 
Mode
¬Set this unit to Motion Picture Recording Mode (l21)
Press the   button fully (press to the bottom) to take the pictu re.
≥In the following situations, you can record still pictures even  while recording a 
motion picture (Simultaneous recording):
j When [REC FORMAT] is set to [AVCHD] or [MP4/iFrame] 
j When [REC FORMAT] is set to [24p] and [REC MODE] is set to [108 0/24p] 
≥ While still pictures are being recorded,   turns red and the rem aining number 
of recordable pictures is displayed.
≥ No shutter sound is emitted when recording still pictures.
≥Self-timer ( l85) does not work.
≥ While recording motion pictures or during the PRE-REC operation , image quality is different from 
ordinary still pictures so that motion picture recording takes  preference over still picture recording.
≥ In the following situations, you  cannot perform simultaneous recording during motion picture 
recording or still picture recording during PRE-REC:
j When [REC FORMAT] is set to [4K MP4]
j When [REC FORMAT] is set to [24p] and [REC MODE] is set to [2160/24p] 
j When the Recording Mode is set to 4K Photo Mode
≥ If simultaneous recording is performed during motion picture re cording, the remaining recordable 
time will be shortened. If this unit is turned off or the recor ding/playback button is pressed, the 
remaining recordable time may be lengthened.
≥ The still picture recording time may be long depending on the p icture size.
Still picture operation indicator (
l234)
R3000 Remaining number of still pictures
≥
Flashes in red when [0] appears.
Size of still pictures ( l101 )
MEGA Optical Image Stabilizer ( l30)
Optical Image Stabilizer ( l80)
AF assist lamp ( l102 )
MEGAR3000R3000R300025.9M
≥Screen display will disappear when 
no touch operation is performed for a 
specific period of time. To display it 
again, touch the screen.
≥ It will be constantly displayed when 
the remaining number of still pictures 
that can be recorded becomes 200 or 
less.
25.9M
MEGA 
						

							- 32 -
≥Maximum number of recordable pictures that can be displayed is  9999. If the number of 
recordable pictures exceeds 9999, R 9999+ is displayed. The num ber will not change when the 
picture is taken until the number of recordable pictures is 999 9 or less.
≥ The recording time may be long depending on the recording condi tion.
Registering your favorite scenes while recording 4K 
motion picture
Setting [REC FORMAT] to [4K MP4] or switching the Recording Mod e to 4K Photo allows you to 
register the part for which you press the photoshot button as a favorite scene.
After registering your favorite scenes, you can create still pi ctures of them by following the steps 
described in “Tagging Favorite Scene” in Playback Mode. ( l124 )
≥ Set [REC FORMAT] to [4K MP4], or set the Recording Mode to 4K P hoto. (l59, 91 )
Press the photoshot button fully (all the way down) while recor ding motion 
picture.
≥ The part will be registered as a favorite scene, and the favori te scene icon A and the remaining 
number of favorite scenes  B will be displayed.
≥ The remaining number of favorite scenes is displayed in red whe n it reaches 0.
≥ Between the time you start recording a motion picture and the t ime you stop recording it, up to 10 
scenes can be registered.
≥ It takes approximately 4 seconds to register a favorite scene.
≥You cannot register favorite scenes in the following situations :
j During PRE-REC
j During Fade operation
j While the Remote Pan Tilt Cradle is in automatic operation ([Pa rty Scene]/[Moving Object]/
[Preset Positions])
≥ Registered scenes are not recognized as favorite scenes for [FA VORITE SCENE SETUP] of 
Highlight Playback. ( l11 5 )
9
B
A 
						

							- 33 -
1Set this unit to Playback Mode. (l20)
2Touch the play mode select icon A. (l24 )≥You can also set by touching  , selecting [VIDEO SETUP] 
or [PICT. SETUP]  # [MEDIA, VIDEO/PICTURE]. ( l37)
3Select the still picture  C or the recording 
format of the motion picture  D you wish to 
play back.
≥ Touch [Enter].
≥If you touch [4K MP4], its recording mode icon B will be 
displayed on the thumbnail screen. ( )
≥ If you touch  , scenes recorded as Backup for Twin Camera will b e displayed. The recording 
mode icon ( ) will be displayed on the thumbnail screen, and eac h thumbnail will be 
displayed with one of the following icons:
j AVCHD [PH] scenes recorded as Backup for Twin Camera: 
j AVCHD [HA] scenes recorded as Backup for Twin Camera: 
j AVCHD [HG] scenes recorded as Backup for Twin Camera: 
j AVCHD [HE] scenes recorded as Backup for Twin Camera: 
4(When [MP4/iFrame], [AVCHD] or [24p] is touched)Touch the desired recording format for playback.
≥When [MP4/iFrame] is selected
≥ When [AVCHD] is selected
Basic
Motion picture/Still picture playback
[ALL MP4/iFrame]/[1080/60p]/[1080/30p]/[720/30p]/[360/30p]/[iFr ame]
[ALL AVCHD]/[1080/60p]/[1080/60i]
ALL
MENU

 
						

							- 34 -
≥When [24p] is selected
≥ The recording mode icon  B is displayed in the thumbnail display when the item is touched .
j When an item in [MP4/iFrame] is selected: 
,   (Red),   (Red),   (Red),   (Red), 
j When an item in [AVCHD] is selected: 
,  , 
j When an item in [24p] is selected: 
 (Red),   (Red)
≥ The following icons are displayed on thumbnails when [ALL MP4/i Frame] is touched:
≥  is displayed on the thumbnails of MP4 [1080/50M] scenes when [ 1080/60p] in [MP4/iFrame] 
is touched.
≥ The following icons are displayed on thumbnails when [ALL AVCHD ] or [1080/60i] is touched:
5Touch the scene or the still picture to be played back.≥To display the next (previous) page:
jSlide the thumbnail display upward (downward) while touching it .
j Switch the Touch Menu, and then touch   (up) /   (down) on the th umbnail scroll 
lever.
6Select the playback operation by touching 
the operation icon.
≥ Operation icons and screen display will disappear when 
no touch operation is performed for a specific period of 
time. To display them again, touch the screen.
[2160/24p]/[1080/24p]
jMP4 [1080/60p] scene: (Blue) (Recording mode [1080/50M])
(Recording mode [1080/28M])
j MP4 [1080/30p] scene:
j MP4 [720/30p] scene:
j MP4 [360/30p] scene:
j iFrame scene:
j AVCHD [1080/60p] scene:
j AVCHD [PH] scene:
j AVCHD [HA] scene:
j AVCHD [HG] scene:
j AVCHD [HE] scene:
0h01m30s0h01m30s0h01m30s
Operation icon 
						

							- 35 -
* When touched two times, the fast rewind/fast forward speed increases. (The screen display 
changes to  / .)
∫ Change the thumbnail display
While the thumbnail is displayed, the thumbnail display changes  in the 
following order if the zoom lev er is operated to   side or   side .
20 scenes  () 9 scenes  () 1 scene  () Highlight & Time Frame Index* 
( l 104 )
* Highlight & Time Frame Index can only set in Motion Picture Pl ayback 
Mode.
≥ If you set this unit to Recording Mode or Playback Mode by pres sing the recording/playback 
button, you will return to the 9 scenes display.
≥ By displaying in 1 scene or touching and holding the thumbnail  in the 20 scenes or 9 scenes 
display, recording date and time are displayed when playing bac k motion pictures, and recording 
date and file number when playing back still pictures.
∫ Speaker/Headphone volume 
adjustment
Operate the volume lever to adjust the speaker/
headphone volume during Motion Picture 
Playback Mode.
≥Sound will be heard only during normal playback.
≥ If pause play is continued for approx. 5 minutes, the screen re turns to the thumbnails.
≥ The elapsed time for playback indication will be reset to 0h00m 00s each scene.
≥ The elapsed playback time is not displayed for scenes recorded  in the following recording modes:
j FULL HD Slow Motion Video Mode
j (For the  )
Slow & Quick Video Mode and Dolly Zoom Mode
≥ When played back with [ALL AVCHD] or [ALL MP4/iFrame] selected,  the screen may become 
black momentarily at the time the scene switches.
Motion picture playbackStill picture playback
1/ ;: Playback/Pause
6 : Fast rewind playback *
5 : Fast forward playback *
∫ : Stops the playback and shows the 
thumbnails. 1/
;: Slide show (playback of the still 
pictures in numerical order) start/
pa us e.
2; : Plays back the previous picture.
;1 : Plays back the next picture.
∫ : Stops the playback and shows the 
thumbnails.
To w a r d s   “ r”:Increases the volume
To w a r d s   “ s”:Decreases the volume
WXF991 
						

							- 36 -
Motion picture compatibility
≥This unit is based on AVCHD Progressive/AVCHD format/MPEG-4 AVC  file format.
≥ Even if the devices used have compatible standards, when playba ck of motion pictures 
recorded using another device is performed using this unit, or  when motion pictures recorded 
using this unit is played back in  another device, playback may  not proceed normally, or may 
not be possible. (Please check compatibility in the operating i nstruction of your device.)
≥ Motion pictures recorded with other devices are not supported b y this unit.
Still picture compatibility≥This unit is compliant with the unified standard DCF (Design ru le for Camera File system) 
established by JEITA (Japan Electronics and Information Technol ogy Industries Association).
≥ This unit may degrade or not play back still pictures recorded  or created on other products 
and other products may degrade or not play back still pictures  recorded on this unit.
≥ Depending on the playback device, still pictures may be played  back with picture sizes 
different from the ones with which they were recorded. 
						

							- 37 -
≥Touch   (left side)/   (right side) of   on the Touch Menu to disp lay  . (l24)
1To u c h   .
2Touch the top menu  A.
3Touch the submenu B.
≥ Next (previous) page is displayed by touching 
/.
4Touch the desired item to enter the 
setting.
5Touch [EXIT] to exit the menu 
setting.
∫About   guide display
After touching  , touching the submenus 
and items will cause function descriptions and 
settings confirmation messages to appear.
≥After the messages have been displayed, the 
guide display is canceled.
Basic
Using the menu screen
MENU
MENU
MENU 
						

							- 38 -
Set the display method for the screen information display.
Please refer to page 25.
It is possible to display and r ecord the time at the travel des tination by selecting your home region 
and the travel destination.
1 Select the menu.
≥When the [HOME] (your home region) is not set, the message appe ars. Touch [ENTER] and 
proceed to Step 3.
2(Only when setting your home region)To u c h   [ H O M E ] .≥ Touch [ENTER].
3(Only when setting your home region)Touch  /  to select your home 
region and touch [ENTER].
≥Touch [DAYLIGHT SAVING] to set daylight 
saving time.   is displayed and the 
summer time setting is turned on, the time 
difference between the current time and GMT 
will be set forward by 1 hour. Touch [DAYLIGHT 
SAVING] again to return to the normal time 
setting.
If you set [Link Clock to Daylight Saving] to 
[ON], the current time will also be set forward by 1 hour. ( l39)
Basic
Using the Setup Menu
[DISPLAY]
: [SETUP]  # [DISPLAY]  # desired setting
[5 SEC.]:Information is displayed on the screen for 5 seconds after star ting the 
Motion Picture Recording Mode or Still Picture Recording Mode,  starting 
to playback, or touching the screen.
[ON]:Constantly displayed.
[CLOCK SET]
[SET WORLD TIME]
: [SETUP]  # [SET WORLD TIME]
MENU
MENU


A The current time
B The time difference from GMT 
(Greenwich Mean Time) 
						

							- 39 -
4(Only when setting the region of your travel destination)
Touch [DESTINATION].≥Touch [ENTER].
≥ When the home region is set for the first time, the screen for  selecting home/travel destination 
appears after setting the home region successively. If the home  region has already been set 
once, execute the menu operation for Step 1.
5(Only when setting the region of your travel 
destination)
Touch  /  to select your travel 
destination and touch [ENTER].
≥ Touch [DAYLIGHT SAVING] to set daylight 
saving time.   is displayed and the 
summer time setting is turned on, the time 
difference between the travel destination and 
the home region will be set forward by 1 hour. 
Touch [DAYLIGHT SAVING] again to return to 
the normal time setting.
If you set [Link Clock to Daylight Saving] to 
[ON], the time at the travel destination will also 
be set forward by 1 hour.
≥ Close the setting by touching [EXIT].   appears and the time of  the travel destination is 
indicated.
To return the display to the home settingSet the home region using Steps 1 to 3, and close the setting b y touching [EXIT].
≥If you cannot find your travel d estination in the area shown on  the screen, set it by using the time 
difference from your home region.
If you set this function to [ON] and turn on the summer time setting in [SET WORLD TIME], the 
following times will be set forward by 1 hour: jWhen setting your home region: The current time
j When setting the region of your travel destination: The time at  the travel destination
[Link Clock to Daylight Saving]
: [SETUP] # [Link Clock to Daylight Saving]  # desired display
[ON]:The times are adjusted when the summer time setting is turned o n.
[OFF]:The times are not adjusted when the summer time setting is turned on.


CThe local time at the selected 
travel destination
D The time difference between the 
travel destination and the home 
region
MENU 
						

							- 40 -
It is possible to change the date and time display mode.
≥The date and time are not displayed while the recording mode sw itching icon is displayed. (l21)
≥ When the Touch Shutter is enabled, the recording mode switching  icon is constantly displayed. 
This causes the date and time to disappear from the screen.
It is possible to change the date format.
You can set the display method of  the zoom button icons ( / ) and  recording button icon ( ).
Please refer to page 82.
Please refer to page  139.
[DATE/TIME]
: [SETUP] # [DATE/TIME]  # desired display
[DATE]/[D/T]/[OFF]
[DATE FORMAT]
: [SETUP]  # [DATE FORMAT]  # desired setting
[Y/M/D]/[M/D/Y]/[D/M/Y]
[ZOOM/REC DISPLAY]
: [SETUP] # [ZOOM/REC DISPLAY]  # desired setting
[ON]:Constantly displayed.
[OFF]:Icons will disappear after approx. 5 seconds without any touch  operation.
[O.I.S. LOCK DISPLAY]
[EXT. DISPLAY]
MENU
MENU
TW
MENU