Panasonic Hands Free Kit Cy Bt100u Operating Instructions

English
21
Advanced Operation
❑ 
Calling back
A call-back call can be made.
However, the callback function is disabled after disconnecting
Bluetooth communication. (e.g. communication disconnection
between the Bluetooth unit and mobile phone, and communica-
tion disconnection by turning off the power of the Head unit) 
Step 1
Press the [Hang-on]after a call comes in.
Step 2
Confirm the telephone number on the Head unit.
Step 3
Press the [Hang-on]to make a call.
(Press [Hang-up]to activate cancellation.)...

22
Installation
Main Unit
Qty: 1
Switch Unit
(2 m)
Qty: 1
Microphone with Bracket
(5 m)
Qty: 1
System-up Connecting cable
(3 m)
Qty: 1
Double-sided Tape(12 x 55 mm)Qty: 2
Double-sided Tape(15 x 30 mm)Qty: 1
Cable Clamp
Qty: 5
CY-BT100UCY-BT100Uq
w
e
r
t
y
u
Warning
¡This installation information is designed for professional
installers with knowledge of automobile electrical safety sys-
tems and is not intended for non-technical, do-it-yourself indi-
viduals. It does not contain instructions on the...

English
23
1Remove the cable from the battery negative
terminal.
2Connect all cables of the Hands-Free Kit fea-
turing Bluetooth
®technology.
3Secure the Main unit q, Switch Unit wand
Microphone with Bracket e.
qAttach the Main unit qand the Switch Unit wwith the
double-sided tape t y.
wSecure the microphone with brackete.
eSecure all connection cables with Cable Clamp u.
4Reconnect the Battery Cable.
Main Unit q
Peel off the back papers
Fix the cable with the
Cable Clamp u.Sun visor Attach the...

24
Wiring
Head unit (e.g. CQ-C8403U, Option) Microphone with Brackete
Switch Unit wMain Unit q
System-up connecting cabler
Connection between the Hands-Free Kit featuring Bluetooth®technology and head unit 

English
25
Head unit/Expansion module
connection cable
(supplied with CY-EM100U)
Expansion Module
(CY-EM100U, Option) System-up connecting cabler
Switch Unit wHead unit (e.g. CQ-C8403U, Option)
iPod
Direct Cable for iPod (CA-DC300U, Option)
Connection among the Hands-Free Kit featuring Bluetooth®technology and two or more devices
Microphone with Brackete
Main Unit q 

26
Troubleshooting
If You Suspect Something Wrong
Check and take steps as described below.
If the described suggestions do not solve the problem, it is
recommended to take the unit to your nearest authorized
Panasonic Servicenter. The product should be serviced only
by qualified personnel. Please refer the checking and the
repair to professionals. Panasonic shall not be liable for any
accidents arising out of neglect of checking the unit or your
own repair after your checking.Warning
¡Do not use the unit...

English
27
Failure to pair a
mobile phone
There is the other wireless equipment near the unit.●Switch off the other wireless equipment or keep it away from these bluetooth
units.
The mobile phone (or main unit) is touched or covered by metal objects. Or the mobile
phone is hidden or far from the main unit.
●Move the mobile phone (or main unit) away from metal objects or from the hiding
position.
✽ Consult your dealer to move the main unit.
The mobile phone is not HFP (Hands Free Profile)-ready even it is...

28
The hands-free voices
accompany the echo
or howling.Distance between the microphone and the speaker is too short.●Keep sufficient distance between the microphone and the speakers or decrease
the volume of voice (Refer to the manual of your Head unit.).
✽ Echo may be produced depending on the line status or mobile phone to be used.
The Hands-Free Kit
featuring Bluetooth®
technology cannot
receive a call.
The head unit is set to OFF.●Turn on the power of the head unit.
The Hands-Free Kit featuring...

English
29
The voice quality of
hands-free is low
(Distortion, noise etc.).
There is another wireless device near the unit.●Switch off the wireless device or keep it away from these bluetooth units.
Distance between the Hands-Free Kit featuring Bluetooth®technology and the mobile
phone is too long or by contraries, too short.
●Keep proper distance between the Hands-Free Kit featuring Bluetooth®technology
and the mobile phone.
The reception condition of the mobile phone is poor, or the line status is...

30
Troubleshooting (continued)
A call-back call
cannot be made.
Some mobile phones do not send Bluetooth data even if incoming calls are indicated on
the screen of your mobile phone.  
●A call-back call cannot be made.
The calling party activates the caller ID blocking function.●A call-back call cannot be made.
An international call was received.●A call-back call may not be made internationally depending on a contract with the
mobile phone company. Check the contract.
Talking volume is low
or noisy....