Panasonic Dp C354 Operating Instructions Manual

191
 Chapter 8    Reading Reports/Lists(5) Pages Number of pages transmitted or received. The 3-digit number is the number 
of pages successfully transmitted or received.
When the documents are stored into the memory, two 3-digit numbers will 
appear.
The first 3-digit number represents the number of pages successfully 
transmitted.
The second 3-digit number represents the total number of pages that were 
attempted to be transmitted.
Asterisk “*” indicates that the quality of some received copies was...

192
 Chapter 8    Reading Reports/Lists
Communication Jour nal
This is a report that is printed at the end of each transaction to keep a record of the communication 
result.
• A communication journal is printed when the “12 Comm. Journal (HOME)” has been set to “Always” 
or “Inc Only” in Function Parameters (Fax/Email Settings> Fax Parameters).
If set to “Always” 
A communication journal will be printed when a transaction completes or fails.
If set to “Inc Only” 
A communication journal will be printed...

193
 Chapter 8    Reading Reports/Lists
Items that are covered in the communication journal are listed below.
No.ItemExplanation
(1) Indication of 
communication modeIndication of communication mode.
(2) Start time of 
communicationStart time of communication.
(3) End time of 
communicationEnd time of communication.
(4) File number 001 to 999 (When the communication is stored into the memory, a file 
number is assigned for each communication.)
(5) Station number Sequential number of the Stations....

194
 Chapter 8    Reading Reports/Lists(6) Communication result “OK” indicates that the communication was successful.
“Busy” indicates that the communication has failed because of busy 
line.
“Stop” indicates that STOP was pressed during communication.
“P-OK” indicates that memory overflow occurred while storing the 
documents into the memory for transmission but successfully 
stored document(s) was sent.
“R-OK” indicates that the Relayed XMT was successful.
“B-OK” indicates that the Batch Transmission...

195
 Chapter 8    Reading Reports/Lists
Memo 

196
 Chapter 8    Reading Reports/Lists
Address Book List
This section explains how to print, and read the address book list.
Printing Address Book List
To print an address book list, follow the steps below:
The address book list can also be printed by programming “Fax/Email Settings> Fax Parameters” in Function 
Parameters.
1Press the Fax key.
2Select “More Menus”
3Select “Print Out”.
4Select “Address Book List”.
The address book list will be printed.
zPress Reset key to return the machine to 
the...

197
 Chapter 8    Reading Reports/Lists
Reading Address Book List
Items in the address book list are listed below.
No.ItemExplanation
(1) The first letter of station 
name recorded in your 
machineThe first letter of station name recorded in your machine.
(2) Key name recorded in the 
machineUp to 15 characters
(3) Station name recorded in 
the machineUp to 15 characters
(4) Email address recorded in 
the machine
Telephone number 
recorded in the machineUp to 60 characters (Email address)
Up to 36 digits...

198
 Chapter 8    Reading Reports/Lists
Program List
This section explains how to print, and read the program list.
Printing Program List
To print the program list, follow the steps below:
The program list can also be printed by programming “Fax/Email Settings> Fax Parameters” in the Function 
Parameters.
1Press the Fax key.
2Select “More Menus”.
3Select “Print Out”.
4Select “Program List”.
The program list will be printed.
zPress Reset key to return the machine to 
the initial screen of the current...

199
 Chapter 8    Reading Reports/Lists
Reading Program List
Items in the program list are listed below.
No.ItemExplanation
(1) Key name Key name.
(2) Program name Up to 15 characters
(3) Type of communication “Group” indicates that the Program key is programmed as a group key.
“POP” indicates that the Program key is programmed as an Email Manual 
Reception key.
(4) Destinations Destinations programmed into the Program Key.
(5) Deletion of received Email
“Valid” means that the received Email will be...

200
 Chapter 8    Reading Reports/Lists
Fax Parameter List
This section explains how to print, and read the fax parameter list.
Printing Fax Parameter List
To print the fax parameter list, follow the steps below:
1Press the Fax key.
2Select “More Menus”.
3Select “Print Out”.
4Select “Fax Parameter List”.
The fax parameter list will be printed.
zPress Reset key to return the machine to 
the initial screen of the current active mode.