Panasonic DLP Projector PT-DZ770U PT-DZ770UL Operating Instructions

[NETWORK] menu
ENGLISH - 91
Settings
▶■[Network status] page
Click [Status] → [Network status].
The current network setting status is displayed.
▶■[Access error log] page
Click [Status] → [Access error log].
The error log on the WEB server is displayed such as access to the pages that do not exist or access with 
unauthorized user names or passwords.
▶■[Access log] page
Click [Status] → [Access log].
The log such as user name accessed to the WEB control page, accessed IP
 address, accessed time is...

[NETWORK] menu
92 - ENGLISH
Settings
▶■[Basic control] page
Click [Projector control] → [Basic control].
(1)
(2)
(4)
(6) (3)
(5)
(1) [POWER]
Switches the power on/off.
(2) [SHUTTER] Switches between use or not use of the shutter 
function.
(3) [OSD] Switches between on (display)/off (no display) of the 
on-screen display function.
(4) [SYSTEM] Switches the system method.
(5) On-screen display of the projector Displays the same content as the on-screen display 
of the projector. The settings of the menu...

[NETWORK] menu
ENGLISH - 93
Settings
▶■[Network config] page
Click [Detailed set up] → [Network config].
▶z
Click [Network config] to display the [CAUTION!] screen.
▶zThe current settings are displayed by pressing the [Next] button.
▶zThe following setting change screen is displayed by pressing the [Change] button.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(1) [PROJECTOR NAME]
Enter the name of the projector. Also enter the host 
name if it is required when using a DHCP server, etc.
(2) [DHCP ON]/[DHCP OFF] To...

[NETWORK] menu
94 - ENGLISH
Settings
▶■[Adjust clock] page
Click [Detailed set up] → [Adjust clock].
(1)
(2)
(3)
(4)(5)(6)
(7)
(1) [Time Zone]
Select the time zone.
(2) [Set time zone] Updates the time zone setting.
(3) [NTP SYNCHRONIZATION] Set to [ON] to adjust the date and time automatically.
(4) [NTP SERVER NAME] Enter the IP address or server name of the NTP 
server when you set to adjust the date and time 
manually.
(To enter the server name, the setup of the DNS 
server is required.)
(5) [Date]...

[NETWORK] menu
ENGLISH - 95
Settings
▶■[E-mail set up] page
E-mail address set in advance for use when there is a problem or when the usage time of a lamp reaches a 
set value.
E-mail can be sent to (maximum two locations).
Click [Detailed set up] → [E-mail set up].
(1)
(2)
(3)
(4)
(5)
(6)
(1) [ENABLE]
Select [Enable] to use the E-mail function.
(2) [SMTP SERVER NAME] Enter the IP address or the server name of the 
E-mail server (SMTP). To enter the server name, the 
setup of the DNS server is required....

[NETWORK] menu
96 - ENGLISH
Settings
▶■[E-mail set up] page (continued)
(3)
(2)
(1)
(1) [E-MAIL ADDRESS 2]
Enter the E-mail address to be sent when two E-mail 
addresses are to be used.
Leave it blank when two E-mail addresses are not to 
be used.
(2) Settings of the conditions to send E-mail Select the conditions to send E-mail to the second 
E-mail address.
[MAIL CONTENTS]: Select either [NORMAL] or [SIMPLE].
[ERROR]: An E-mail message is sent when an error 
occurred in the self-diagnosis.
[LAMP1...

[NETWORK] menu
ENGLISH - 97
Settings
▶■[Authentication set up] page
You can set the authentication items when POP authentication or SMTP authentication is necessary to send 
an E-mail message.
Click [Detailed set up] → [Authentication set up].
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(1) [Auth] Select the authentication method specified by your 
Internet service provider.
(2) [SMTP Auth] Set when the SMTP authentication is selected.
(3) [POP server name] Enter the POP server name.
Allowed characters:...

[NETWORK] menu
98 - ENGLISH
Settings
▶■Contents of mail sent
▶z
Example of E-mail sent when E-mail is set
The following E-mail is sent when the E-mail settings have been established.
=== Panasonic projector report(CONFIGURE) ===
Projector Type          : DZ770
Serial No               : SH1234567
-----  E-mail setup data -----
TEMPERATURE WARNING SETUP 
MINIMUM TIME           at [ 60] minutes interval 
INTAKE AIR TEMPERATURE Over [ 45C / 113F ] 
ERROR                   [ OFF ] 
LAMP1 RUNTIME           [...

[NETWORK] menu
ENGLISH - 99
Settings
▶zExample of the E-mail sent for an error
The following E-mail is sent when an error has occurred.
=== Panasonic projector report(CONFIGURE) ===
Projector Type          : DZ770
Serial No               : SH1234567
-----  check system -----
MAIN CPU BUS 
 [   OK   ]
FAN   [   OK   ]
INTAKE AIR TEMPERATURE   [   OK   ]
OPTICS MODULE TEMPERATURE   [   OK   ]
AROUND LAMP TEMPERATURE   [   OK   ]
LAMP1 REMAIN TIME   [   OK   ]
LAMP2 REMAIN TIME   [   OK   ]
LAMP1 STATUS   [...

[NETWORK] menu
100 - ENGLISH
Settings
▶■[Change password] page
Click [Change password].
(1)
(2)
(3)
(1) [Administrator]
Used to change the setting of the [Administrator].
(2) [User] Used to change the setting of the [User].
(3) [Next] Used to change the setting of the password.
▶z[Administrator] account
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(1) [Account]
Displays the account to change.
(2) [Current] [User name] Enter the user name before the change.
(3) [Current] [Password] Enter the current password.
(4) [New]...