Panasonic DLP Projector PT-DZ770U PT-DZ770UL Operating Instructions

[PROJECTOR SETUP] menu
ENGLISH - 71
Settings
[SCHEDULE]
Set the command execution schedule for each day of 
the week.
1) Press ▲▼ to select [SCHEDULE].
2)  
Press  ◀▶ to switch [SCHEDULE].
▶z
The setting will change as follows each time 
you press the button.
[ON][OFF]
Note
 z When [SCHEDULE] is set to [ON], the [ST

ANDBY 
MODE] setting is forcibly switched to [NORMAL], 
and the setting cannot be changed. Even if 
[SCHEDULE] is then set to [OFF] when in this 
state, the setting of [STANDBY MODE] remains...

[PROJECTOR SETUP] menu
72 - ENGLISH
Settings
 zTo delete a command already set, press the 
 button on the Step 6) screen, or select 
[DELETE] on the Step 7) screen and press the 
 button.
 z If multiple commands have been set for the same 
time, they are executed in chronological order 
starting from the smallest command number

.
 zT

he operating time will be the local time.(
 page 75)
 z If an operation is executed with the remote control 
or control panel of the projector or with a control 
command...

[PROJECTOR SETUP] menu
ENGLISH - 73
Settings
▶zThe setting will change as follows each time 
you press the button.
[ON][OFF]
[ON] Returns the response when the ID 
setting is ALL.
[OFF] Does not return the response 
when the ID setting is ALL.
6) Press 
▲▼ to select [GROUP].
7)  
Press  ◀▶ to switch [GROUP].
▶z
The setting will change as follows each time 
you press the button.
[A][B][Z]
[A] - [Z] Controls multiple projectors 
simultaneously by sending the ID of 
RS-232C.
Set the group from [A] to [Z]....

[PROJECTOR SETUP] menu
74 - ENGLISH
Settings
[STATUS]
Displays the status of the projector.
1) Press ▲▼ to select [ST
ATUS].
2)  
Press the  button.
▶z The  [STATUS] screen is displayed.
3) Press 
◀▶ to switch the pages.
[INPUT] Displays the input terminal currently 
selected.
[SIGNAL NAME] Displays the input signal name.
[SIGNAL 
FREQUENCY] Displays the frequency of the input 
signal.
[PROJECTOR  RUNTIME] Displays the operation times of the 
projector.
[LAMP1]
*1Displays the hours used of lamp 1....

[PROJECTOR SETUP] menu
ENGLISH - 75
Settings
[NO SIGNAL SHUT-OFF]
You can set the power of the projector automatically 
to standby if there is no input signal by the specified 
time.
1) Press ▲▼ to select [NO SIGNAL
 
SHUT-OFF].
2)
 
Press  ◀▶ to switch [NO SIGNAL

 
SHUT-OFF].
[DISABLE] Disables the No signal shut-off 
function.
[10MIN.] -  [90MIN.] Allows you to set in ten minutes 
intervals.
[FUNCTION BUTTON]
Set the functions of the  button on the 
remote control.
1) Press 
▲▼ to select [FUNCTION...

[PROJECTOR SETUP] menu
76 - ENGLISH
Settings
[SAVE ALL USER DATA]
Save the various setting values as a backup in the 
built-in memory of the projector.
1) Press ▲▼ to select [SA
VE ALL USER 
DATA].
2)
 
Press the  button.
▶z The  [SECURITY PASSWORD] screen is 
displayed.
3) Enter a security password and press 
the  button.
4)
 
When the confirmation is displayed, 
select [OK] or [CANCEL], and press 
the  button.
▶z [PROGRESS] is displayed while saving data.
Note
 z The image setting registered in [USER...

[TEST PATTERN] menu
ENGLISH - 77
Settings
[TEST PATTERN] menu
Select [TEST PATTERN] from the main menu.
Refer to “Navigating through the menu” 
(
 page 46) for the operation of the menu 
screen.
 z Press 
◀▶ to switch.
[TEST PATTERN]
Displays the test pattern built-in to the projector.
Settings of position, size, and other factors will not 
be reflected in test patterns. Make sure to display the 
input signal before performing various adjustments.
Press 
◀▶ to switch [TEST PATTERN].
 z
The setting will...

[SIGNAL LIST] menu
78 - ENGLISH
Settings
Select [SIGNAL LIST] from the main menu.
Refer to “Navigating through the menu” 
(
 page 46) for the operation of the menu 
screen.
▶■ Registered signal status
▶z
A name can be set for each sub memory 
(
 page 80).
▶z Memory number: 

A1 (1-2)
Sub memory number
When the address number (A1, A2, ... H7, H8) 
is registered
Registering a signal to the list
After a new signal is input and the  button 
on the remote control or the control panel is pressed, 
the...

[SIGNAL LIST] menu
ENGLISH - 79
Settings
Protecting the registered data
1) Press ▲▼◀▶  to select the signal to 
protect.
2)
 
Press the  button.
▶z The  [REGISTERED SIGNAL STATUS] screen 
is displayed.
3) Press the  button.
▶z The  [REGISTERED SIGNAL SETUP] screen is 
displayed.
4) Press  ▲▼ to select [LOCK].
5)  
Press  ◀▶ to switch [LOCK].
▶z
The setting will change as follows each time 
you press the button.
[OFF][ON]
[OFF]
The signal is not protected.
[ON] The signal is protected.
Note
 z When [LOCK]...

[SIGNAL LIST] menu
80 - ENGLISH
Settings
Managing the sub memory 
list
The projector has a sub memory function that can 
register the multiple image adjustment data, even if it 
is recognized as the same signal by the frequency or 
format of the synchronization signal source.
Use this function when you need to adjust the picture 
quality such as switching of the aspect ratio or white 
balance by the same synchronization signal source. 
The sub memory includes all the data that can be 
adjusted for each...