Panasonic DLP Projector PT-DZ770U PT-DZ770UL Operating Instructions

[DISPLAY OPTION] menu
ENGLISH - 61
Settings
▶■To use a colorimeter to adjust the 
color matching
Use a colorimeter that can measure chromaticity 
coordinates and luminance to change the colors 
[RED], [GREEN], [BLUE], [CYAN], [MAGENTA], 
[YELLOW], and [WHITE] to desired colors.
▶z Inputting the current luminance and 
chromaticity coordinates
1)
 
Press  ▲▼ to select [COLOR 
MA

TCHING].
2)
 
Press  ◀▶ to select [MEASURED].
3)

 
Press the  button.
▶z The  [MEASURED MODE] screen is displayed.
4) Press 
▲▼...

[DISPLAY OPTION] menu
62 - ENGLISH
Settings
[SCREEN SETTING]
Set the screen size.
When changing the aspect of a projected image, 
correct to the optimum image position for the set 
screen. Set as necessary for the screen in use.
1) Press ▲▼ to select [SCREEN 
SETTING].
2)
 
Press the  button.
▶z The  [SCREEN SETTING] screen is displayed.
3) Press 
◀▶ to switch [SCREEN 
FORMA T].
[16:10][4:3][16:9]
4) Press ▲▼ to select [SCREEN 
POSITION].
5)
 
Press  ◀▶ to adjust [SCREEN 
POSITION].
▶z W hen [SCREEN...

[DISPLAY OPTION] menu
ENGLISH - 63
Settings
[RGB IN] 
Set to match the signal to input to the  
terminal.
1) Press ▲▼ to select [RGB IN].
2)  
Press the  button.
▶z The  [RGB IN] screen is displayed.
3) Press 
▲▼ to select an item.
▶■To switch the slice level of an 
input sync signal
4) Select [RGB1 SYNC SLICE LEVEL] or 
[RGB2 SYNC SLICE LEVEL] in Step 3).
5)
 
Press  ◀▶ to switch the [RGB1 SYNC 
SLICE LEVEL] or the [RGB2 SYNC 
SLICE LEVEL].
▶z The setting will change as follows each time 
you press the...

[DISPLAY OPTION] menu
64 - ENGLISH
Settings
[HDMI IN]
Switch the setting when the projector is connected to 
an external device via an HDMI cable and the image 
is not projected correctly.
1) Press ▲▼ to select [HDMI IN].
2)  
Press the  button.
▶z The  [HDMI IN] screen is displayed.
3) Press 
◀▶ to switch [HDMI SIGNAL
 
LEVEL].
▶z The setting will change as follows each time 
you press the button.
[0-1023][64-940]
[0-1023] Select when the DVI-D terminal 
output of an external device (such 
as a...

[DISPLAY OPTION] menu
ENGLISH - 65
Settings
▶■[INPUT GUIDE]
Set display of the input terminal name currently 
selected in the position set by the [OSD 
POSITION].
▶z
The setting will change as follows each time 
you press the button.
[ON][OFF]
▶■ [W ARNING MESSAGE]
You can set the display/hide of the warning 
message.
▶z
The setting will change as follows each time 
you press the button.
[ON][OFF]
[BACK COLOR]
Set the color of the projected image when there is no 
signal input.
1) Press 
▲▼ to select...

[DISPLAY OPTION] menu
66 - ENGLISH
Settings
[SHUTTER SETTING]
Set opening/closing of the shutter when power is 
turned on and after the power is turned off.
1) Press ▲▼ to select [SHUTTER 
SETTING].
2)
 
Press the  button.
▶z The  [SHUTTER SETTING]
 screen is displayed.
3) Press 
▲▼ to select an item.
▶■To set [STARTUP]
4) Select [ST
ARTUP] in Step 3).
5)  
Press  ◀▶ to switch.
▶z
The setting will change as follows each time 
you press the button.
[OPEN][CLOSE]
[OPEN] Projection begins with the shutter...

[DISPLAY OPTION] menu
ENGLISH - 67
Settings
[CUT OFF]
Each red, green and blue color component can be 
removed.
1) Press ▲▼ to select [CUT OFF].
2)  
Press the  button.
▶z The  [CUT OFF] screen is displayed.
3) Press 
▲▼ to select [RED], [GREEN], 
or [BLUE].
4)
 
Press  ◀▶ to switch.
▶z
The setting will change as follows each time 
you press the button.
[OFF][ON]
[OFF]
Disables cutoff.
[ON] Enables cutoff.
Note
 z When input is switched or a signal is switched, the 
cutof

f setting returns to its...

[PROJECTOR SETUP] menu
68 - ENGLISH
Settings
[PROJECTOR SETUP] menu
Select [PROJECTOR SETUP] from the main 
menu, and select the item from the sub-menu.
Refer to “Navigating through the menu” 
(
 page 46) for the operation of the menu 
screen.
 z After selecting the item, press 
▲▼◀▶ to set.
[PROJECTOR ID]
The projector has an ID number setting function that 
can be used when multiple projectors are used side 
by side to enable simultaneous control or individual 
control via one remote control.
1) Press...

[PROJECTOR SETUP] menu
ENGLISH - 69
Settings
[COOLING CONDITION]
Change the fan control depending on the direction of 
projection.
Set [COOLING CONDITION] correctly in accordance 
with the direction of projection referencing the 
following figure. It may shorten the life of the lamp if 
used in incorrect setting.
1) Press ▲▼ to select [COOLING 
CONDITION].
2)
 
Press the  button.
▶z The  [COOLING CONDITION]
 screen is 
displayed.
3) Press  ▲▼ to select a cooling 
condition.

30°
30° 30°
30°
[UPWARD...

[PROJECTOR SETUP] menu
70 - ENGLISH
Settings
[LAMP RELAY]
The lamp to be turned on can be automatically 
switched by specifying the day of the week and time.
The degradation of the lamp due to continuous usage 
can be reduced by automatically switching the lamp 
to be turned on when using the projector continuously 
for 1 week or more.
1) Press ▲▼ to select [LAMP
 RELAY].
2)  
Press  ◀▶ to switch [LAMP

 RELAY].
▶zThe time setting to switch the lamp will change 
as follows each time you press the...