Panasonic DLP Projector PT-DZ770U PT-DZ770UL Operating Instructions

[PICTURE] menu
ENGLISH - 51
Settings
7) Press the  button.
▶zThe  [COLOR TEMPERATURE NAME 
CHANGE] screen is displayed.
8) Press  ▲▼◀▶  to select the text, and 
press the  button to enter the 
text.
9)
 
Press  ▲▼◀▶  to select [OK], and 
press the  button.
▶z The name set to color temperature is changed.
Note
 z When a name is changed, display of [USER] on the 
menu is also changed.
[WHITE GAIN]
You can adjust the brightness of white areas of the 
image.
1) Press 
▲▼ to select [WHITE GAIN].
2)  
Press...

[PICTURE] menu
52 - ENGLISH
Settings
[AI] 
You can perform gradation control appropriate for an 
image to project the image with optimal contrast.
1) Press ▲▼ to select [AI].
2)  
Press  ◀▶ or the  button.
▶z
The  [AI] individual adjustment screen is 
displayed.
3) Press  ◀▶ to switch [AI].
▶z
The setting will change as follows each time 
you press the button.
[ON][OFF]
[ON]
Enables AI correction.
[OFF] Disables AI correction.
[SYSTEM SELECTOR]
The projector will automatically detect the input signal,...

[POSITION] menu
ENGLISH - 53
Settings
Select [POSITION] from the main menu, and 
select the item from the sub-menu.
Refer to “Navigating through the menu” 
(
 page 46) for the operation of the menu 
screen.
 z After selecting the item, press 
▲▼◀▶ to set.
[SHIFT]
You can move the image position vertically or 
horizontally if the image position projected on the 
screen is shifted even when the relative position of the 
projector and the screen is installed correctly.
1) Press 
▲▼ to select [SHIFT].
2)...

[POSITION] menu
54 - ENGLISH
Settings
▶■[THROUGH]
Pictures are displayed without changing the 
resolution of the input signals.
▶■[16:9]
When standard signals*1 are input, the pictures are 
displayed with the aspect ratio converted to 16:9. 
When wide-screen signals
*2 are input, the pictures 
are displayed without changing the aspect ratio.
▶■ [4:3]
When standard signals*1 are input, the pictures 
are displayed without changing the aspect ratio. 
When wide-screen signals
*2 are input, if [4:3] is...

[POSITION] menu
ENGLISH - 55
Settings
3) Press ▲▼ to select [INTERLOCKED].
4)  
Press  ◀▶ to switch [INTERLOCKED].
[OFF] Set the [VERTICAL] and 
[HORIZONTAL] zoom ratio.
[ON] Use [BOTH] to set zoom ratio.
Horizontal and vertical can be 
expanded by units of 1.0 time.
Note
 z When [ASPECT] is set to [THROUGH], [ZOOM] is 
not displayed.
 zWhen anything but [MODE] is selected for 
[DEF

AULT], [ASPECT] is not displayed.
[CLOCK PHASE]
You can adjust to achieve an optimal image when 
there is a flickering...

[ADVANCED MENU]
56 - ENGLISH
Settings
Select [ADVANCED MENU] from the main 
menu, and select the item from the sub-menu.
Refer to “Navigating through the menu” 
(
 page 46) for the operation of the menu 
screen.
 z After selecting the item, press 
▲▼◀▶ to set.
[DIGITAL CINEMA REALITY]
You can increase the vertical resolution and enhance 
the picture quality by performing the cinema 
processing when the PAL (or the SECAM) 576i signal, 
the NTSC 480i, 1080/50i, and 1080/60i signals are 
input.
1) Press...

[ADVANCED MENU]
ENGLISH - 57
Settings
[INPUT RESOLUTION]
You can adjust to achieve an optimal image when 
there is a flickering image or smeared outlines.
1) Press ▲▼ to select [INPUT 
RESOLUTION].
2)
 
Press the  button.
▶z The  [INPUT RESOLUTION]
 screen is 
displayed.
3) Press  ▲▼ to select [T
OTAL DOTS], 
[DISPLAY DOTS], [TOTAL LINES], or 
[DISPLAY LINES], then press  ◀▶ to 
adjust it.
▶z Values corresponding to the input signal are 
displayed automatically for each item. Change 
the displayed values...

[ADVANCED MENU]
58 - ENGLISH
Settings
8) Press ◀▶ to switch [ON].
▶z
A marker for image position adjustment is 
displayed. The green line is the starting point 
of edge blending adjusted with [START] in Step 
6). The green line is the ending point of edge 
blending adjusted with [WIDTH] in Step  6). The 
position where the red and green lines overlap 
for the sets to join will be the optimal point.
Make sure to set the correction width for the 
sets to join as the same value. Optimal joining 
is not...

[DISPLAY LANGUAGE] menu
ENGLISH - 59
Settings
Select [DISPLAY LANGUAGE] from the main 
menu, and display the sub-menu.
Refer to “Navigating through the menu” 
(
 page 46) for the operation of the menu 
screen.
 z Press 
▲▼ to select a language, and press the 
 button to set.
Changing the display language
You can select the language of the on-screen display.
Ô
ÔŠ 
DISPLAY LANGUAGE
 z
Various menus, settings, adjustment screens, 
control button names, etc., are displayed in the 
selected language.
 z...

[DISPLAY OPTION] menu
60 - ENGLISH
Settings
Select [DISPLAY OPTION] from the main menu, 
and select the item from the sub-menu.
Refer to “Navigating through the menu” 
(
 page 46) for the operation of the menu 
screen.
 z After selecting the item, press 
▲▼◀▶ to set.
[COLOR MATCHING]
You can correct the color difference between the sets 
when multiple sets are to be used simultaneously.
1) Press 
▲▼ to select [COLOR MATCHING].
2) Press 
◀▶ to switch [COLOR MATCHING].
▶z
The setting will change as...