Panasonic DLP Projector PT-DZ770U PT-DZ770UL Operating Instructions

Projecting
ENGLISH - 41
Basic Operation
Check the projection lens attachment ( page 33), external device connection ( page 34) and power cord 
connection (
 page 37), and then switch on the power ( page 39) to start projecting. Select the video for 
projection, and adjust appearance of the projected image.
Projecting
Selecting the input signal
Select an input signal.
Press the input selection (, , , , , ) 
buttons on the control panel or the remote control.
▶z The image of the signal being input in...

Projecting
42 - ENGLISH
Basic Operation
Moving the lens to the home position
1) Press the  button on the control panel or the  button on the remote 
control for at least three seconds.
2)
 
While the [HOME POSITION] menu is displayed (for approximately five seconds), 
press the  button.
/(16
+20(326,7,21
(;(&87(
&$1&(/
▶z [PROGRESS] is displayed in the menu screen, and the lens returns to the home position.
Attention
 z The home position of the lens is the lens position when the lens is being replaced...

Remote control operation
ENGLISH - 43
Basic Operation
Remote control operation
Using the shutter function
If the projector is not used for a certain period of time 
during the meeting intermission, for example, it is 
possible to turn off the image temporarily.
 button
1) Press the  button on the 
remote control or control panel.
▶zThe image disappears.
2) Press the  button again.
▶zThe image is displayed.
Note
 z The power indicator  will 
flash slowly in green while the shutter is closed.
Using the...

Remote control operation
44 - ENGLISH
Basic Operation
Using the Automatic setup 
function
The automatic setup function can be used to 
automatically adjust the resolution, clock phase, and 
picture position when analog RGB signals consisting 
of bitmap images such as computer signals are being 
input, or to automatically adjust the picture position 
when DVI-D/HDMI signals are input. Supplying 
images with bright white borders at the rims and high-
contrast black and white characters is recommended 
when...

Remote control operation
ENGLISH - 45
Basic Operation
Changing the picture aspect 
ratio
You can toggle through aspect ratios to select the one 
that is appropriate for the input signal.
 button
Press the  button on the 
remote control.
▶zThe setting will change as follows each time 
you press the button.
[VID AUTO]*1
[S1 AUTO]*2[VID AUTO(PRI.)]*2[DEFAULT]
[HV FIT]
[AUTO]*3
[V FIT][THROUGH]
[H FIT][4:3][16:9]
*1: For video signal and S video (NTSC) signal input only
*2:  For S video (NTSC) signal input...

Menu navigation
46 - ENGLISH
Settings
Menu navigation
Navigating through the menu
▶■Operating procedure
 button
1) Press the  button on the 
remote control or the control panel.
▶z
The  [MAIN MENU] screen is displayed.
(17(5
0$,10(18
3,&785(
326,7,21
$9$1&(0(18
,63/$

Menu navigation
ENGLISH - 47
Settings
Note
 zY

ou cannot reset all the settings to the factory 
default at a time.
 z T

o reset all the settings adjusted in the sub-menu 
item to the factory default at a time, perform 
initialization from the [PROJECTOR SETUP] menu 
→ [INITIALIZE] (
 page 76).
 z Some menu items cannot be reset by pressing the 
 button. Adjust each item manually.
 z The triangular mark under the bar scale in the 
individual adjustment screen indicates the factory 
default setting....

Menu navigation
48 - ENGLISH
Settings
▶■[DISPLA Y LANGUAGE] 
Details ( page 59)
▶■[DISPLA Y OPTION] 
Sub-menu itemFactory defaultPage
[COLOR MATCHING] [OFF] 60
[COLOR CORRECTION] [OFF] 61
[CONTRAST MODE] [NORMAL] 61
[SCREEN SETTING] ― 62
[AUTO SIGNAL] [OFF] 62
[AUTO SETUP] ― 62
[RGB IN] — 63
[DVI-D IN] ― 63
[HDMI IN] — 64
[ON-SCREEN DISPLAY] ― 64
[BACK COLOR] [BLUE] 65
[STARTUP LOGO] [DEFAULT 
LOGO] 65
[SHUTTER SETTING] ― 66
[FREEZE] ― 66
[SIDE BY SIDE] ― 66
[CUT OFF] ― 67
▶■[PROJECT OR SETUP] 
Sub-menu...

[PICTURE] menu
ENGLISH - 49
Settings
[PICTURE] menu
Select [PICTURE] from the main menu, and 
select the item from the sub-menu.
Refer to “Navigating through the menu” 
(
 page 46) for the operation of the menu 
screen.
 z After selecting the item, press 
▲▼◀▶ to set.
[PICTURE MODE]
You can switch to the desired picture mode suitable 
for the image source and the environment in which 
the projector is used.
1) Press 
▲▼ to select [PICTURE MODE].
2)  
Press  ◀▶ or the  button.
▶z
The  [PICTURE MODE]...

[PICTURE] menu
50 - ENGLISH
Settings
[COLOR]
You can adjust the color saturation of the projected 
image.
1) Press ▲▼ to select [COLOR].
2)  
Press  ◀▶ or the  button.
▶z
The  [COLOR] individual adjustment screen is 
displayed.
3) Press  ◀▶ to adjust the level.
Operation Adjustment Range
Press  ▶. Deepens colors. Maximum 
value +31
Press  ◀. Weakens colors. Minimum 
value –31
[TINT]
You can adjust the skin tone in the projected image.
1) Press  ▲▼ to select [TINT].
2)  
Press  ◀▶ or the  button.
▶z
The...