Panasonic DLP Projector PT-DZ770U PT-DZ770UL Operating Instructions

[SECURITY] menu
ENGLISH - 81
Settings
[SECURITY] menu
Select [SECURITY] from the main menu, and 
select the item from the sub-menu.
Refer to “Navigating through the menu” 
(
 page 46) for the operation of the menu 
screen.
 z When the projector is used for the first time
Initial password: Press 
▲▶▼◀▲▶▼◀ in 
order

, and press the  button.
 zAfter selecting the item, press 
▲▼◀▶ to set.
Attention
 z
When you select the [SECURITY] from the main 
menu and press the  button, entering a 
password is...

[SECURITY] menu
82 - ENGLISH
Settings
[TEXT CHANGE]
Change the text displayed when the text display is 
enabled by selecting [TEXT] in [DISPLAY SETTING].
1) Press ▲▼ to select [TEXT CHANGE].
2)  
Press the  button.
▶z The  [TEXT CHANGE] screen is displayed.
3) Press 
▲▼◀▶  to select the text, and 
press the  button to enter the 
text.
▶z Maximum 22 characters can be input.
4) Press 
▲▼◀▶  to select [OK] and 
press the  button.
▶z The text is changed.
[MENU LOCK]
Display the menu with the  button, and set...

[SECURITY] menu
ENGLISH - 83
Settings
▶■[REMOTE CONTROL]
▶z
You can set the limitation on the control from 
the remote control.
[ENABLE] Enables button operations from the 
remote control.
[DISABLE] Disables button operations from 
the remote control.
5) Press 
▲▼ to select [ENABLE] or 
[DISABLE], and press the  
button.
6)
 
When the confirmation is displayed, 
select [OK] or [CANCEL], and press 
the  button.
Note
 z W

hen a button operation is performed on the device 
set to [DISABLE], the  [SECURITY...

[NETWORK] menu
84 - ENGLISH
Settings
[NETWORK] menu
Select [NETWORK] from the main menu, and 
select the item from the sub-menu.
Refer to “Navigating through the menu” 
(
 page 46) for the operation of the menu 
screen.
 z After selecting the item, press 
▲▼◀▶ to set.
[NETWORK SETUP]
Perform the initial setting of the network before using 
the network function.
1) Press 
▲▼ to select [NETWORK 
SETUP].
2)
 
Press the  button.
▶z The  [NETWORK SETUP] screen is displayed.
3) Press 
▲▼ to select an item,...

[NETWORK] menu
ENGLISH - 85
Settings
Network connections
The projector has a network function, and the following operations are available from the computer using the Web 
control.
 zSetting and adjustment of the projector
 zDisplay of the projector status
 zSending of E-mail messages when there is a problem with the projector
“Crestron RoomV

iew” is a system of Crestron Electronics, Inc. that manages and controls devices on multiple 
systems connected to a network collectively with a computer.
The...

[NETWORK] menu
86 - ENGLISH
Settings
▶■Name and function of network function parts
(1) (2) (3)
(1) LAN10/100 lamp (yellow)
Lights on when connected to the 100BASE-TX.
(2)  terminal (10BASE-T/100BASE-TX) Used to connect the LAN cable here. (3) LAN LINK/ACT lamp (green)
Lights on when connected.
Flashes when transmitting/receiving data. 

[NETWORK] menu
ENGLISH - 87
Settings
Accessing from the Web browser
1) Start up the Web browser on the computer.
2)  
Enter the IP
  address set on the projector into the URL entry field of the Web browser.
3)
 
Enter the user name and the password.
▶z The factory default setting of the user name is user1 (user rights)/admin1 (administrator rights) and the 
password is panasonic (lower case).
4) Click OK.
▶zThe [Projector status] page is displayed.
Note
 zIf you use a W

eb browser to control the...

[NETWORK] menu
88 - ENGLISH
Settings
▶■Items description
(1)
(2)
(3)
(4)
(5)
(6)
(1) Page tab Switches pages by clicking it.
(2) [Status] The status of the projector is displayed by clicking 
this item.
(3) [Projector control] The [Projector control] page is displayed by clicking 
this item.
(4) [Detailed set up] The [Detailed set up] page is displayed by clicking 
this item.
(5) [Change password] The [Change password] page is displayed by 
clicking this item.
(6) [CRESTRON RoomView] The control page of...

[NETWORK] menu
ENGLISH - 89
Settings
▶■[Projector status] page
Click [Status] → [Projector status].
Displays the status of the projector for the following items.
(10)
(11)
(12)
(15)
(16)(6)
(7)
(8)
(9)
(1)
(2)
(3)
(4)
(13)
(14)
(5)
(17)
(1) [PROJECTOR TYPE]
Displays the type of the projector.
(2) [MAIN VERSION] Displays the firmware version of the projector.
(3) [POWER] Displays the status of the power.
(4) [SHUTTER] Displays the status of the projector.
(5) [LAMP SELECT] Displays the setting status of...

[NETWORK] menu
90 - ENGLISH
Settings
▶■Error information page
When [Error (Detail)] is displayed in the self-diagnosis display of the [Projector status] screen, click it to 
display the error details.
▶zThe projector may go into the standby status to protect the projector depending on the contents of the error.
[OK]: operating pr\Aoperly
[FA\fLED]: a pro\blem occ\Aurred
[WARN\fNG]: warning
▶z Description of problem occurrence [F AILED]:
Parameter
Description
[MAIN CPU BUS] There is a problem with the...