Panasonic DLP Projector PT-DZ770U PT-DZ770UL Operating Instructions

							[NETWORK] menu
ENGLISH - 91
Settings
▶■[Network status] page
Click [Status] → [Network status].
The current network setting status is displayed.
▶■[Access error log] page
Click [Status] → [Access error log].
The error log on the WEB server is displayed such as access to the pages that do not exist or access with 
unauthorized user names or passwords.
▶■[Access log] page
Click [Status] → [Access log].
The log such as user name accessed to the WEB control page, accessed IP
 address, accessed time is 
displayed.
Note
 z [Access error log]/[Access log] will display the recent few thousand accesses/requests. May be unable to 
display all information when many accesses/requests are made at one time.
 zWhen [Access error log]/[Access log] exceeds a certain amount, old information will be erased.
 zConfirm [Access error log]/[Access log] periodically

. 
						

							[NETWORK] menu
92 - ENGLISH
Settings
▶■[Basic control] page
Click [Projector control] → [Basic control].
(1)
(2)
(4)
(6) (3)
(5)
(1) [POWER]
Switches the power on/off.
(2) [SHUTTER] Switches between use or not use of the shutter 
function.
(3) [OSD] Switches between on (display)/off (no display) of the 
on-screen display function.
(4) [SYSTEM] Switches the system method.
(5) On-screen display of the projector Displays the same content as the on-screen display 
of the projector. The settings of the menu can be 
checked or changed. This is displayed even when 
the on-screen display function is set to off (hide).
(6) [INPUT SELECT] Switches the input signal.
▶■[Detail control] page
Click [Projector control] → [Detail control].
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(1)
(1) Control of the projector
The projector is controlled by clicking the buttons in 
the same way as the buttons on the remote control. 
After the projector is controlled, the on-screen 
display of the projector on the right side of the 
control page is updated.
(2) [LENS] Adjusts the projection lens.
(3) [TEST PATTERN] Displays the test pattern.
(4) [GET OSD] Updates the on-screen display of the projector at the 
right of the control page.
(5) [SUB MEMORY] Switches the sub memory.
(6) [SYSTEM DAYLIGHT VIEW] Switches to system daylight view settings.
(7) [FREEZE] Temporarily pauses the image.
(8) [SIDE BY SIDE] Displays two different input signals simultaneously. 
						

							[NETWORK] menu
ENGLISH - 93
Settings
▶■[Network config] page
Click [Detailed set up] → [Network config].
▶z
Click [Network config] to display the [CAUTION!] screen.
▶zThe current settings are displayed by pressing the [Next] button.
▶zThe following setting change screen is displayed by pressing the [Change] button.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(1) [PROJECTOR NAME]
Enter the name of the projector. Also enter the host 
name if it is required when using a DHCP server, etc.
(2) [DHCP ON]/[DHCP OFF] To enable the DHCP client function, set to [DHCP 
ON].
(3) [IP ADDRESS] Enter the IP address when not using a DHCP server.
(4) [SUBNET MASK] Enter the subnet mask when not using a DHCP 
server.
(5) [DEFAULT GATEWAY] Enter the default gateway address when not using a 
DHCP server.
(6) [DNS1] Enter the DNS1 server address.
Permissible characters for the entry of DNS1 server 
address (primary):
Numbers (0 to 9), period (.)
(Example: 192.168.0.253)
(7) [DNS2] Enter the DNS2 server address.
Permissible characters for the entry of DNS2 server 
address (secondary):
Numbers (0 to 9), period (.)
(Example: 192.168.0.254)
(8) [Back]/[Next] Click the [Back] button to return to the original 
screen. The current settings are displayed by 
pressing the [Next] button. Click the [Submit] button 
to update the settings.
Note
 zWhen you use the “Forward” and “Back” functions of your browser

, a warning message “Page has Expired” 
may appear. In that case, click [Network config] again since the following operation will not be guaranteed. 
						

							[NETWORK] menu
94 - ENGLISH
Settings
▶■[Adjust clock] page
Click [Detailed set up] → [Adjust clock].
(1)
(2)
(3)
(4)(5)(6)
(7)
(1) [Time Zone]
Select the time zone.
(2) [Set time zone] Updates the time zone setting.
(3) [NTP SYNCHRONIZATION] Set to [ON] to adjust the date and time automatically.
(4) [NTP SERVER NAME] Enter the IP address or server name of the NTP 
server when you set to adjust the date and time 
manually.
(To enter the server name, the setup of the DNS 
server is required.)
(5) [Date] Enter the date to be changed.
(6) [Time] Enter the time to be changed.
(7) [Set date and time] Updates the date and time settings.
Note
 zThe replacement of the battery inside the projector is required when the time goes out of alignment right after 
correcting the time. Please consult your dealer

.
▶■[Ping test] page
You can check whether the network is connected to the E-mail server, POP server, DNS server, etc.
Click [Detailed set up] → [Ping test].
(1)
(2)
(3)
(4)
(1) [Input IP address] Enter the IP address of the server to be tested.
(2) [Submit] Executes the connection test.
(3) Example of display when the connection has  succeeded
(4) Example of display when the connection has  failed 
						

							[NETWORK] menu
ENGLISH - 95
Settings
▶■[E-mail set up] page
E-mail address set in advance for use when there is a problem or when the usage time of a lamp reaches a 
set value.
E-mail can be sent to (maximum two locations).
Click [Detailed set up] → [E-mail set up].
(1)
(2)
(3)
(4)
(5)
(6)
(1) [ENABLE]
Select [Enable] to use the E-mail function.
(2) [SMTP SERVER NAME] Enter the IP address or the server name of the 
E-mail server (SMTP). To enter the server name, the 
setup of the DNS server is required.
(3) [MAIL FROM] Enter the E-mail address of the projector. (Up to 63 
characters in single byte)
(4) [MEMO] You can enter information such as the location of 
the projector that notifies the sender of the E-mail. 
(Up to 63 characters in single byte)
(5) [MINIMUM TIME] Change the minimum interval for the temperature 
warning mail. The default value is 60 minutes. In this 
case, another E-mail will not be sent for 60 minutes 
after sending the temperature warning mail even if it 
reaches the warning temperature.
(6) [INTAKE AIR TEMPERATURE] Change the temperature setting for the temperature 
warning mail. A temperature warning mail is sent 
when the temperature exceeds this value.
(8)
(7)
(7) [E-MAIL ADDRESS 1]Enter the E-mail address to be sent.
(8) Settings of the conditions to send E-mail Select the conditions to send E-mail.
[MAIL CONTENTS]: Select either [NORMAL] or [SIMPLE].
[ERROR]: An E-mail message is sent when an error 
occurred in the self-diagnosis.
[LAMP1 RUNTIME]: An E-mail message is sent when the remaining 
lamp on time for the lamp 1 has reached the 
value set at the right field.
[LAMP2 RUNTIME]: An E-mail message is sent when the remaining 
lamp on time for the lamp 2 has reached the 
value set at the right field.
[INTAKE AIR TEMPERATURE]: An E-mail message is sent when the air intake 
temperature has reached the value set at the 
above field.
[PERIODIC REPORT]: Place a check mark on this when E-mail is to be 
sent periodically.
It will be sent on the days and time with the 
check mark. 
						

							[NETWORK] menu
96 - ENGLISH
Settings
▶■[E-mail set up] page (continued)
(3)
(2)
(1)
(1) [E-MAIL ADDRESS 2]
Enter the E-mail address to be sent when two E-mail 
addresses are to be used.
Leave it blank when two E-mail addresses are not to 
be used.
(2) Settings of the conditions to send E-mail Select the conditions to send E-mail to the second 
E-mail address.
[MAIL CONTENTS]: Select either [NORMAL] or [SIMPLE].
[ERROR]: An E-mail message is sent when an error 
occurred in the self-diagnosis.
[LAMP1 RUNTIME]: An E-mail message is sent when the remaining 
lamp on time for the lamp 1 has reached the 
value set at the right field.
[LAMP2 RUNTIME]: An E-mail message is sent when the remaining 
lamp on time for the lamp 2 has reached the 
value set at the right field.
[INTAKE AIR TEMPERATURE]: An E-mail message is sent when the air intake 
temperature has reached the value set at the 
above field.
[PERIODIC REPORT]: Place a check mark on this to send E-mail to the 
second E-mail address periodically. It will be sent 
on the days and time with the check mark.
(3) [Submit] Update the settings. 
						

							[NETWORK] menu
ENGLISH - 97
Settings
▶■[Authentication set up] page
You can set the authentication items when POP authentication or SMTP authentication is necessary to send 
an E-mail message.
Click [Detailed set up] → [Authentication set up].
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(1) [Auth] Select the authentication method specified by your 
Internet service provider.
(2) [SMTP Auth] Set when the SMTP authentication is selected.
(3) [POP server name] Enter the POP server name.
Allowed characters:
Alphanumerics (A to Z, a to z, 0 to 9)
Minus sign (-) and period (.)
(4) [User name] Enter the user name for the POP server or the SMTP 
server.
(5) [Password] Enter the password for the POP server or the SMTP 
server.
(6) [SMTP server port] Enter the port number of the SMTP server.
(Normally 25)
(7) [POP server port] Enter the port number of the POP server.
(Normally 110)
(8) [Submit] Update the settings. 
						

							[NETWORK] menu
98 - ENGLISH
Settings
▶■Contents of mail sent
▶z
Example of E-mail sent when E-mail is set
The following E-mail is sent when the E-mail settings have been established.
=== Panasonic projector report(CONFIGURE) ===
Projector Type          : DZ770
Serial No               : SH1234567
-----  E-mail setup data -----
TEMPERATURE WARNING SETUP 
MINIMUM TIME           at [ 60] minutes interval 
INTAKE AIR TEMPERATURE Over [ 45C / 113F ] 
ERROR                   [ OFF ] 
LAMP1 RUNTIME           [ OFF ]   at REMAIN [ 400] H 
LAMP1 RUNTIME           [ OFF ]   at REMAIN [ 200] H 
LAMP2 RUNTIME           [ OFF ]   at REMAIN [ 400] H 
LAMP2 RUNTIME           [ OFF ]   at REMAIN [ 200] H 
INTAKE AIR TEMPERATURE  [ OFF ] 
PERIODIC REPORT 
Sunday    [ OFF ]  Monday    [ OFF ]  Tuesday   [ OFF ]  Wednesday [ OFF ] 
Thursday  [ OFF ]  Friday    [ OFF ]  Saturday  [ OFF ] 
00:00  [ OFF ]    01:00  [ OFF ]    02:00  [ OFF ]    03:00  [ OFF ] 
04:00  [ OFF ]    05:00  [ OFF ]    06:00  [ OFF ]    07:00  [ OFF ] 
08:00  [ OFF ]    09:00  [ OFF ]    10:00  [ OFF ]    11:00  [ OFF ] 
12:00  [ OFF ]    13:00  [ OFF ]    14:00  [ OFF ]    15:00  [ OFF ] 
16:00  [ OFF ]    17:00  [ OFF ]    18:00  [ OFF ]    19:00  [ OFF ] 
20:00  [ OFF ]    21:00  [ OFF ]    22:00  [ OFF ]    23:00  [ OFF ] 
-----  check system -----
MAIN CPU BUS 
[   OK   ]
FAN  [   OK   ]
INTAKE AIR TEMPERATURE  [   OK   ]
OPTICS MODULE TEMPERATURE  [   OK   ]
AROUND LAMP TEMPERATURE  [   OK   ]
LAMP1 REMAIN TIME  [   OK   ]
LAMP2 REMAIN TIME  [   OK   ]
LAMP1 STATUS  [   OK   ]
LAMP2 STATUS  [   OK   ]
SHUTTER  [   OK   ]
INTAKE AIR TEMP.SENSOR  [   OK   ]
OPTICS MODULE TEMP.SENSOR  [   OK   ]
AROUND LAMP TEMP.SENSOR  [   OK   ]
BATTERY  [   OK   ]
COLOR WHEEL  [   OK   ]
COVER OPEN  [   OK   ]
FILTER UNIT  [   OK   ]
AIR FILTER  [   OK   ]
(Error code 00 00 00 00 00 00 00 00)
Intake air temperature     : 26 degC /  78 degF
Optics module temperature  : 39 degC / 102 degF
Around lamp temperature    : 30 degC /  86 degF
PROJECTOR RUNTIME     1 H
POWER ON              1 times
LAMP1 ON              1 times
LAMP1 ECO             0 H
LAMP1 NORMAL          0 H
LAMP1 REMAIN       1999 H
LAMP2 ON              1 times
LAMP2 ECO             0 H
LAMP2 NORMAL          1 H
LAMP2 REMAIN       1999 H
-------- Current status ---------
MAIN VERSION         1.00 
NETWORK VERSION      1.00 
SUB VERSION          1.00 
LAMP STATUS          LAMP1=ON  LAMP2=ON 
INPUT SIGNAL         RGB1   ---
                     0.00kHz / 0.00Hz
REMOTE2 STATUS       DISABLE 
----- Wired Network configuration -----
DHCP Client  OFF 
IP address   192.168.10.100
MAC address  70:58:12:00:00:00
Wed Jan 18 11:42:37 2012
----- Memo ----- 
						

							[NETWORK] menu
ENGLISH - 99
Settings
▶zExample of the E-mail sent for an error
The following E-mail is sent when an error has occurred.
=== Panasonic projector report(CONFIGURE) ===
Projector Type          : DZ770
Serial No               : SH1234567
-----  check system -----
MAIN CPU BUS 
 [   OK   ]
FAN   [   OK   ]
INTAKE AIR TEMPERATURE   [   OK   ]
OPTICS MODULE TEMPERATURE   [   OK   ]
AROUND LAMP TEMPERATURE   [   OK   ]
LAMP1 REMAIN TIME   [   OK   ]
LAMP2 REMAIN TIME   [   OK   ]
LAMP1 STATUS   [   OK   ]
LAMP2 STATUS   [   OK   ]
SHUTTER    [   OK   ]
INTAKE AIR TEMP.SENSOR    [   OK   ]
OPTICS MODULE TEMP.SENSOR   [   OK   ]
AROUND LAMP TEMP.SENSOR   [   OK   ]
BATTERY   [   OK   ]
COLOR WHEEL   [   OK   ]
COVER OPEN   [   OK   ]
FILTER UNIT   [ FAILED ]
AIR FILTER   [   OK   ]
(Error code 04 00 00 00 00 00 00 00)
Intake air temperature     : 26 degC /  78 degF
Optics module temperature  : 39 degC / 102 degF
Around lamp temperature    : 30 degC /  86 degF
PROJECTOR RUNTIME     1 H
POWER ON              1 times
LAMP1 ON              1 times
LAMP1 ECO             0 H
LAMP1 NORMAL          0 H
LAMP1 REMAIN       1999 H
LAMP2 ON              1 times
LAMP2 ECO             0 H
LAMP2 NORMAL          1 H
LAMP2 REMAIN       1999 H
-------- Current status ---------
MAIN VERSION         1.00 
NETWORK VERSION      1.00 
SUB VERSION          1.00 
LAMP STATUS          LAMP1=ON  LAMP2=ON 
INPUT SIGNAL         RGB1   ---
                     0.00kHz / 0.00Hz
REMOTE2 STATUS       DISABLE 
----- Wired Network configuration -----
DHCP Client  OFF 
IP address   192.168.10.100
MAC address  70:58:12:00:00:00
Wed Jan 18 11:42:37 2012
----- Memo ----- 
						

							[NETWORK] menu
100 - ENGLISH
Settings
▶■[Change password] page
Click [Change password].
(1)
(2)
(3)
(1) [Administrator]
Used to change the setting of the [Administrator].
(2) [User] Used to change the setting of the [User].
(3) [Next] Used to change the setting of the password.
▶z[Administrator] account
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(1) [Account]
Displays the account to change.
(2) [Current] [User name] Enter the user name before the change.
(3) [Current] [Password] Enter the current password.
(4) [New] [User name] Enter the desired new user name. (Up to 16 characters 
in single byte)
(5) [New] [Password] Enter the desired new password. (Up to 16 characters 
in single byte)
(6) [New] [Password(Retype)] Enter the desired new password again.
(7) [OK] Determines the change of password.