Panasonic DLP Based Projector PT-D10000U PT-DW10000U Operating Instructions

ENGLISH – 81
Special Features
Note
The air filter cleaning monitor (FILTER CLEANING) 
will flash blue while cleaning of the air filter is in 
progress. If there is a problem with the air filter, the 
air filter cleaning monitor (FILTER CLEANING) will 
light red.
The time taken for cleaning is approximately 30 to 
40 seconds.
The setting time will be the local time. 	p. 81

Automatic cleaning will not be carried out if the 
projector is in standby mode.
If the projector is not in projection mode when the...

82 – ENGLISH
Option2 settings (continued)
  Setting the startup logo
This sets the startup logo that is projected when the 
power is turned on.
1. Press ▲▼ to select “STARTUP 
LOGO”.
2. Press ◄► to switch “STARTUP 
LOGO”.
The setting will change as follows each time 
◄► is pressed.
LOGO3OFF
LOGO2LOGO1
LOGO3:
The Panasonic logo and DIGITAL 
PROJECTOR logo are projected. 
OFF:
No startup logo is projected. 
LOGO1:
The picture registered by the user will be 
projected.
LOGO2:
The picture registered by the...

ENGLISH – 83
Special Features
The projector has 8 types of internal test patterns 
to check the condition of the set.
MENUPress to display the 
MAIN MENU screen.
Press to select “TEST 
PATTERN”.
Press to display the 
“TEST PATTERN” 
screen.
MENUPress to display the 
MAIN MENU screen.
Press to select “TEST 
PATTERN”.
Press to display the 
“TEST PATTERN” 
screen.
MAIN MENU
  PICTURE
  POSITION
  ADVANCED MENU
  DISPLAY LANGUAGE
  OPTION1
  OPTION2
  TEST PATTERN
  SIGNAL LIST
  NETWORK
  SECURITY
    MENU...

84 – ENGLISH
This allows you to use network functions.
MENUPress to display the 
MAIN MENU screen.
Press to select 
“NETWORK”.
Press to display the 
“NETWORK” menu.
MENUPress to display the 
MAIN MENU screen.
Press to select 
“NETWORK”.
Press to display the 
“NETWORK” menu.
MAIN MENU
  PICTURE
  POSITION
  ADVANCED MENU
  DISPLAY LANGUAGE
  OPTION1
  OPTION2
  TEST PATTERN
  SIGNAL LIST
  NETWORK
  SECURITY
    MENU SELECT
    SUB MENU
ENTER
MAIN MENU
  PICTURE
  POSITION
  ADVANCED MENU
  DISPLAY...

ENGLISH – 85
Special Features
Returning the network function 
setting back to the factory setting
The user can return all settings of network function 
such as IP address, password and E-mail setting to 
the factory setting.
1. Press ▲▼ to select “STORE”.
2.  Hold down DEFAULT for 
3 seconds.
A confirmation screen will be displayed.
To cancel, press MENU. The “NETWORK 
SETTING” screen will be displayed.
3. Press ENTER.
The IP address, password, E-mail settings 
and all the other network function settings...

86 – ENGLISH
  Network connections
The projector is equipped with network functions, and web browser controls can be used to carry out the following 
operations from a computer.
Projector settings and adjustments
Projector status display
Transmission of E-mail messages if there is a problem with the projector
Note
A LAN cable is required to use the network function.
Name and function of network function parts
Attention
If the LAN terminal is touched by electrostatically charged hands (or body), failure...

ENGLISH – 87
Special Features
Accessing from the Web browser
1.  Activate the Web browser in the personal computer.
2.  Enter the IP address set by the projector into the URL input field of the 
Web browser.
3.  Enter your “User Name” and “Password”.
At the time of shipment from the factory, the “User Name” is set to “user1” and the “Password” is set to 
“panasonic” (lowercase).
4.  Press OK and the top page will appear.
Password change page
Click [Change password].
Note
Avoid activating two or more Web...

88 – ENGLISH
Basic control page
This page is the first page displayed when the projector is accessed through a web browser.
To move from another page, click [Projector control], then [Basic control]. 
■
Control button
Click this item, and a projector 
control page appears.
Update button
Click this item, and the update page 
of the projector’s firmware appears.
E-mail set up button
Click this item, and an E-mail setting 
page appears. Monitor information button
Click this item, and the status of the...

ENGLISH – 89
Special Features
Detail control page
Click [Projector control], then [Detail control] to display the Detail control page.
Monitor information page
Click [Projector control], then [Status information] to display the Status information page.
This page displays the projector statuses established for the items shown below.
■
■
On-screen status is displayed, even 
if the on-screen of projector is set to 
off.
Lens adjustment
Menu display Test pattern display
This button updates the on-screen...

90 – ENGLISH
Error information page
When  is displayed on the status information screen, click it to display the error 
details.
Depending on the nature of the error, the projector may be placed in the standby mode for its own protection.
When [FAILED] has appeared for an item
■
•
●
OK: Normal operation
FAILED: Occurrence of troubleOK: Normal operation
FAILED: Occurrence of trouble
Parameter Description
MAIN CPU BUS Trouble has occurred in the microcomputer circuitry. Consult your dealer.
FAN Trouble has...