Home > Panasonic > Projector > Panasonic DLP Based Projector PT-D10000U PT-DW10000U Operating Instructions

Panasonic DLP Based Projector PT-D10000U PT-DW10000U Operating Instructions

Here you can view all the pages of manual Panasonic DLP Based Projector PT-D10000U PT-DW10000U Operating Instructions. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 1

TQBJ 0208
Operating Instructions
 DLP® Based Projector
Commercial Use
PT-D10000U
PT-DW10000U
Read these instructions completely before operating this unit.
Models No. 

Page 2

2 – ENGLISH
Dear Panasonic Customer:
This instruction booklet provides all the necessary operating information that you might require. We hope it will help 
you to get the most performance out of your new product, and that you will be pleased with your Panasonic DLP® 
based projector.
The serial number of your product may be found on its back. You should note it in the space provided below and 
retain this booklet in case service is required.
Model number: PT-D10000U/PT-DW10000U
Serial number:  

Page 3

ENGLISH – 3
Getting StartedGetting Started
Basic Operation Special Features Information
Contents
IMPORTANT SAFETY NOTICE ............................................................................................. 4
Precautions with regard to safety ........................................................................................ 6
Before Using ........................................................................................................................ 10
Location and function of each...

Page 4

4 – ENGLISH
IMPORTANT SAFETY NOTICE
WARNING:  TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE 
THIS PRODUCT TO RAIN OR MOISTURE.
The lightning flash with arrowhead symbol, within an equilateral triangle, 
is intended to alert the user to the presence of uninsulated “dangerous 
voltage” within the Product’s enclosure that may be of sufficient magnitude 
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the 
user to the...

Page 5

ENGLISH – 5
Getting Started
WARNING:  This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to part 15 of the FCC Rules. These limits 
are designed to provide reasonable protection against harmful interference 
in a residential installation. This equipment generates, uses and can radiate 
radio frequency energy and, if not installed and used in accordance with 
the instructions, may cause harmful interference to radio communications. 
However, there is...

Page 6

6 – ENGLISH
Precautions with regard to safety
WARNING
If a problem occurs (such as no image) or if you notice smoke or 
a strange smell coming from the projector, turn off the power and 
disconnect the power cord from the wall outlet.
•  Do not continue to use the projector in such cases, otherwise fire or electric shocks could result.
•  Check that no more smoke is coming out, and then contact an Authorized Service Center for repairs.
•  Do not attempt to repair the projector yourself, as this can be...

Page 7

ENGLISH – 7
Getting Started
Insert the power cord plug securely into the wall outlet.
•  If the plug is not inserted correctly, electric shocks or overheating could result.
•  Do not use plugs which are damaged or wall outlets which are coming loose from the wall. 
Do not place the projector on top of surfaces which are unstable.
•  If the projector is placed on top of a surface which is sloped or unstable, it may fall down or tip over, 
and injury or damage could result.
Do not place the projector into...

Page 8

8 – ENGLISH
CAUTION
Precautions with regard to safety (continued)
Do not set up the projector in humid or dusty places or in places 
where the projector may come into contact with smoke or steam.
•  Using the projector under such conditions may result in fire or electric shocks.
When disconnecting the power cord, hold the plug, not the cord.
•  If the power cord itself is pulled, the cord will become damaged, and fire, short-circuits or serious 
electric shocks may result.
Always disconnect all cables...

Page 9

ENGLISH – 9
Getting Started
Disconnect the power cord plug from the wall outlet as a safety 
precaution before carrying out any cleaning.
•  Electric shocks can result if this is not done.
If the lamp has broken, ventilate the room immediately. Do not touch 
or bring your face close to the broken pieces.
•  Failure to observe this may cause the user to absorb the gas which was released when the lamp broke 
and which contains nearly the same amount of mercury as fluorescent lamps, and the broken pieces...

Page 10

10 – ENGLISH
  Accessories
Check that all of the accessories shown below have been included with your projector.
Remote Control
[N2QAYB000076 × 1]Batteries for Remote 
Control (AA)Power cord
[K2CG3YY00015 × 1]Drop-prevention bracket
Eye bolt
[THEA172J × 4]Wire
[TTRA0144 × 4]
Caution when moving the projector
The projection lens is susceptible to vibrations and impacts. Be sure to always remove the lens during transport.
Cautions regarding setup
Be sure to observe the following precautions when installing...
Start reading Panasonic DLP Based Projector PT-D10000U PT-DW10000U Operating Instructions

Related Manuals for Panasonic DLP Based Projector PT-D10000U PT-DW10000U Operating Instructions

All Panasonic manuals