Panasonic DLP Based Projector PT-D10000U PT-DW10000U Operating Instructions

ENGLISH – 71
Special Features
 
Back Color
This sets the color for the projection screen when no 
signals are being input.
1. Press ▲▼ to select “BACK 
COLOR”.
2. Press ◄► to switch “BACK 
COLOR”.
The setting will change as follows each time 
◄► is pressed.
BLACKBLUELOGO1
LOGO3LOGO2
BLACK: 
The entire projection area will appear black. 
BLUE:
The entire projection area will appear blue.
LOGO1:
The picture registered by the user will be 
projected in the projection area.
LOGO2:
The picture registered by...

72 – ENGLISH
 AUX DVI EDID (Only when the 
optional input module is installed)
Select the EDID mode setting that corresponds to the 
device to be connected.
1. Press ▲▼ to select “AUX DVI 
EDID”.
2. Press ◄► to switch “AUX DVI 
EDID”.
The setting will change as follows each time 
◄► is pressed.
EDID1EDID2 (PC)
EDID1 (Input signal formats supported) :
480p, 576p, 720/60p, 720/59.94p, 720/50p, 
1 080/60i, 1 080/59.94i, 1 080/50i, 1 080/24sF, 
1 080/23.98sF, 1 080/30p, 1 080/29.97p, 
1 080/25p, 1 080/24p, 1...

ENGLISH – 73
Special Features
4. Press ▲▼ to select the item to 
be set, and press ◄► to switch 
the setting.
MAIN WINDOW:
The input terminal for the main window is 
displayed. The ◄► buttons can be used to 
select the input terminal.
SIZE: The user can specify the display size of 
the main window between 10 % and 100 %.
POSITION: The user can specify the display 
position of the main window on the screen.
SUB WINDOW:
The input terminal for the SUB WINDOW is 
displayed. The ◄► buttons can be used to...

74 – ENGLISH
  Position of on-screen 
indications
The user can specify the position of the on-screen 
indications.
1. Press ▲▼ to select “OSD 
POSITION”.
2. Press ◄► to switch “OSD 
POSITION”.
The setting will change as follows each time 
◄► is pressed.
2 (Left center of the 
screen)
3 (Bottom left of the 
screen)
4 (Top center of the 
screen)
5 (Center of the 
screen)
6 (Bottom center of 
the screen)
1 (Top left of the 
screen)
9 (Bottom right of the 
screen)
8 (Right center of the 
screen)
7 (Top right...

ENGLISH – 75
Special Features
 
Setting a projector ID
The projector has an ID number setting function that 
helps the user to control two or more projectors either 
simultaneously or separately with a single remote 
control. The ID number is set to “ALL” by default.  
Hence the ID number need not be set when only 
one projector is used.
1. Press ▲▼ to select 
“PROJECTOR ID”.
2. Press ◄► to switch 
“PROJECTOR ID”.
The setting will change as follows each time 
◄► is pressed.
ALL1
642
3.  Press MENU...

76 – ENGLISH
Option2 settings (continued)
  Installation Setting
A projection scheme can be chosen depending on 
the installation of the projector. If the picture is shown 
upside down or in reverse, change the projection 
scheme.
Select the setting by displaying the on-screen 
indications using buttons of the remote control or the 
control panel on the main unit.
1. Press ▲▼ to select 
“INSTALLATION”.
2. Press ◄► to switch 
“INSTALLATION”.
The setting will change as follows each time 
◄► is pressed....

ENGLISH – 77
Special Features
 
Direction
The fan is controlled in accordance with the setup 
angle.
1. Press ▲▼ to select 
“DIRECTION”.
2. Press ◄► to switch 
“DIRECTION”.
The setting will change as follows each time 
◄► is pressed.
HV
H (HORIZONTAL):
This is the standard setup.
V (VERTICAL):
Select this if the projector is tilted at a large 
vertical angle (an angle which exceeds 30° from 
the horizontal).  •
•
•
OPTION2
PROJECTOR ID
INSTALLATION
ALTITUDE
DIRECTION
LAMP SELECT
LAMP RELAY
RS-232C
SYSTEM...

78 – ENGLISH
  Lamp select
This lets you switch the four light source lamps to one 
of four brightnesses in accordance with the operating 
conditions and purpose of use.
1. Press ▲▼ to select “LAMP 
SELECT”.
2. Press ◄► to switch “LAMP 
SELECT”.
The setting will change as follows each time 
◄► is pressed.
L1/L4
QUAD
L1
L2
L3
L4
L2/L3
L1/L2/L4
TRIPLE
DUAL
SINGLE
L2/L3/L4
L1/L3/L4
L1/L2/L3
•
OPTION2
PROJECTOR ID
INSTALLATION
ALTITUDE
DIRECTION
LAMP SELECT
LAMP RELAY
RS-232C
SYSTEM INFORMATION
AIR FILTER...

ENGLISH – 79
Special Features
 
Lamp relay
If using the projector for a continuous period of 
24 hours or more, this setting can be used to 
automatically switch the lamps that are turned on in 
order to reduce the lamp deterioration that can occur 
as a result of continuous use.
1. Press ▲▼ to select “LAMP 
RELAY”.
2. Press ◄► to switch “LAMP 
RELAY”.
The time interval for lamps to be switched will 
change as shown in the diagram below each 
time ◄► is pressed.
OFF00:00
23:0001:00
Note
When “SINGLE”,...

80 – ENGLISH
Option2 settings (continued)
  System information
Displays the system information of the projector.
1. Press ▲▼ to select “SYSTEM 
INFORMATION”.
2. Press ENTER.
The “SYSTEM INFORMATION”  screen will be 
displayed.
3. Press ◄► to move to the next 
page.
•
OPTION2
PROJECTOR ID
INSTALLATION
ALTITUDE
DIRECTION
LAMP SELECT
LAMP RELAY
RS-232C
SYSTEM INFORMATION
AIR FILTER CLEANING
DATE AND TIME
STARTUP LOGO
PASSWORD
    MENU SELECT
    SUB MENU2
FRONT-F
LOW
H
QUAD
OFF
LOGO1
ENTER
OPTION2
PROJECTOR...