Panasonic Digital Imaging Systems For Basic Operations Dp 8060 Operating Instructions

							61
Replacing
Consumables
6
7
8
9
1011
●When the Staple jams
The following message will be displayed on the
Touch Panel Display: “Can Not Complete Confirm
Staple Unit”
Follow the steps 11 to 13 on page 58 to
check the staple operation.
New Staple Case
Tape
Remove
Staple Cartridge
Return
Stapler Unit
Return
Close
Finisher Front Cover 
						

							Replacing Consumables
62
Dispose of the Punch Hole Residue
1
2
3
45
1
2
3
■ ■■ ■
■ DA-FS355A with optional Punch Unit
(DA-SP41)
When the punch hole container is full, the
punch hole crust indicator will be shown on
the display.
■ ■■ ■
■ DA-FS600/FS605 with optional Punch
Unit (DA-SP31)
4
Open
Return
Pull out
Finisher
Slide out
Close
Pull out
Release Button 
						

							63
Replacing
Consumables
5
1
2
35
■ ■■ ■
■ DA-FS330
4
Return
Finisher
Slide out
Pull out
Finisher Entry guide
Trash Box
Return
Release Button 
						

							Replacing Consumables
64
■ ■■ ■
■ Replacing the Battery
Replacing the Battery
1
23
The copier has an internal battery (Product No.: CR2032) which maintains the date and time.
In the event, the battery requires replacement, the following message will be displayed.
The service life of the battery is approximately 1 year under normal use.
●THIS PRODUCT CONTAINS A LITHIUM BATTERY. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE.
IMPROPER USE OR REPLACEMENT MAY CAUSE OVERHEATING, RUPTURE OR EXPLOSION RESULTING IN
INJURY OR FIRE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS OF YOUR LOCAL
WASTE OFFICIALS AND LOCAL REGULATIONS.
●Be sure to use the specified type of battery only.
●Ensure that the battery is installed with correct polarity.
●Keep the battery away from small children.
■ ■■ ■
■ Notice: California only:
This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material - special handling may apply.See www.dtsc.ca.gov/hazardouswaste/perchlorate
WARNING!
Open the Front Cover.
Remove the Screw and Holder.Reinstall the Holder and Screw.
1
2
NOTE
●Battery Holder is placed behind the print data
LED.
CAUTION! 
						

							65Appendix
Replacing
Consumables
Specifications
TypeSemi Console
Platen TypeFixed
Acceptable OriginalSheets, Books (max. Ledger)
Copying MethodLaser Electrophotography
Fixing MethodHeat Roller Fixing
Imaging MethodDry-Type Two components imaging
ResolutionMaximum: 600 dpi
Operation PanelTouch Panel Display
Maximum Copy SizeLedger - Invoice via Paper Tray
Void AreaMax. 0.2 (5 mm)
Warm Up TimeDP-8060/8045 : Approx. 180 seconds (68 °F/20 °C)
DP-8035 : Approx. 30 seconds (68 °F/20 °C)
First Copy TimeDP-8060 : Approx. 3.5 seconds
(Letter 
, from 1st Tray, platen)DP-8045 : Approx. 4.5 seconds
DP-8035 : Approx. 5.8 seconds
Multi-Copy SpeedDP-8060 : 60 cpm (Letter size)
DP-8045 : 45 cpm (Letter size)
DP-8035 : 35 cpm (Letter size)
Enlargement RatiosPreset: 121 %, 129 %, 155 %, 200 %
Variable: from 101 - 400 % in 1 % increments
Reduction RatiosPreset: 79 %, 77 %, 65 %, 61 %, 50 %
Variable: from 99 - 25 % in 1 % increments
Paper FeedPaper Tray (1550 sheets + 550 sheets) + Sheet Bypass (50 sheets)
+ System Console (1100 sheets)
Paper WeightPaper Tray: 16 - 24 lb (Bypass: 15 - 35 lb)
Quantity SelectorMaximum: 999 sheets (Optional Exit Tray capacity is 250 sheets)
Electrical Consumption120 V AC, 60 Hz, 12 A
Energy ConsumptionLess than 1.45 kW
Dimensions (W x D x H)23.6 (W) x 29.8 (D) x 35.4 (H) (600 x 757 x 900 mm)
WeightDP-8060/8045 :302 lb (137 kg)
DP-8035 :295 lb (134 kg)
Operating EnvironmentTemperature: 50 - 86 °F (10 - 30 °C); Relative Humidity: 30 - 80 %
(However, the humidity should be 70 % or less at a temperature of 86 °F (30 °C),
and the temperature should be 80 °F (27 °C) or less at a humidity level of 80 %.)
●Specifications are subject to change without notice.
DP-8060/8045/8035 (Copier)
Modes Power Consumption Warm  Up Time(Measured 68 °F/20 °C)
Power  Saver  Mode DP-8060 : Approximately 200 W
DP-8045 : Approximately 190 W DP-8060/8045/8035 : Min. 30 sec. recovery
DP-8035 : Approximately 60 W
Sleep  Mode Approximately 35 WDP-8060/8045 :180 sec. recovery
DP-8035 : 30 sec. recovery
Shutdown  Mode Below 4 WDP-8060/8045 :180 sec. recovery
DP-8035 : 30 sec. recovery 
						

							Appendix
66
Printer Unit
*1 Microsoft® Windows® 98 operating system *2 Microsoft® Windows® Millennium Edition operating system
*3 Microsoft® Windows NT® operating system Version 4.0 *4 Microsoft® Windows® 2000 operating system
*5 Microsoft® Windows® XP operating system *6 Microsoft® Windows Server® 2003 operating system
Printing Speed:DP-8060: Up to 60 sheets/minute
DP-8045: Up to 45 sheets/minute
DP-8035: Up to 35 sheets/minute
Resolution (dots per inch):Max. 1200 x 600 dpi
Interface:Ethernet (10Base-T/100Base-TX)
Parallel Port
Applicable OS:Windows 98*
1, Me*2, NT 4.0*3 (with service pack 3 or later is required),
2000*4, XP*5, Server 2003*6
Tray CapacityLetter: Maximum 85 sheets (20 lb: 75 g/m2)
Invoice/Legal/Ledger: Maximum 70 sheets (20 lb: 75 g/m2)
Paper SizeInvoice/Letter/Legal/Ledger
Paper Weight14 - 28 lb (50 - 105 g/m
2)/1-sided
17 - 28 lb (64 - 105 g/m2)/2-sided
Electrical RequirementsSupplied from copier
Dimensions (W x D x H)23.6 x 23.0 x 5.9 in (600 x 583 x 151 mm)
i-ADF*1 (Standard)
CombinationPaper Tray x 1
Storage Tray x 1
Paper SizeInvoice/Letter/Letter-R/Legal/Ledger
Paper Weight16 - 24 lb (60 - 90 g/m2)
Paper CapacityMaximum 550 sheets x 1: 20 lb (75 g/m2)
Electrical RequirementsSupplied from copier
Dimensions (W x D x H)23.6 x 28.7 x 11.4 in (600 x 730 x 290 mm)
Weight64 lb (29 kg)
Applicable ModelsDP-8060/8045/8035
System Console 1 (DA-DS603)
CombinationPaper Tray x 2
Paper SizeInvoice/Letter/Letter-R/Legal/Ledger
Paper Weight16 - 24 lb (60 - 90 g/m2)
Paper CapacityMaximum 550 sheets x 2: 20 lb (75 g/m2)
Electrical RequirementsSupplied from copier
Dimensions (W x D x H)23.6 x 28.7 x 11.4 in (600 x 730 x 290 mm)
Weight66 lb (30 kg)
Applicable ModelsDP-8060/8045/8035
System Console 2 (DA-DS604)
Specifications
*1 inverted-ADF 
						

							67Appendix
CompatibilityITU-T Group 3
Coding SchemeJBIG, MH, MR, MMR (Conforms to ITU-T Recommendations)
Modem TypeITU-T   V.34, V.17, V.29, V.27  ter  and V.21
Modem Speed2,400 - 33,600 bps
Document SizeLedger/Legal/Letter/Letter-R/Invoice/Invoice-R
Max : Platen Glass :  11 x 17 (Ledger)
  ADF :  11 (Originals Width)
Min : Platen Glass :   No  Minimum
  ADF :  5.5 x 8.5 (Invoice)
Scanning MethodSheet Feeding with CCD type image sensor
Effective Scanning Width10.8 (274 mm)
Scanner ResolutionHorizontal
Standard and Fine Resolution: 203 pels/inch (8 pels/mm)
Super Fine Resolution: 406 pels/inch (16 pels/mm)
Vertical
Standard Resolution: 98 lines/inch (3.85 lines/mm)
Fine Resolution: 196 lines/inch (7.7 lines/mm)
Super Fine Resolution: 391 lines/inch (15.4 lines/mm)
Address Book Memory1000 stations
CapacityEach station can register up to 36 digits for each telephone number
(including pauses and spaces) and up to 15 characters for each station name
Image Memory Capacity Base Memory 3 MB: 180 pages
with 4 MB Flash Memory Card: 500 pages
with 8 MB Flash Memory Card: 820 pages
(Based on ITU-T Image No.1 using Standard Resolution)
FCC Registration NumberUS: BTLFA15BMGCS02-01
Ringer Equivalence1.5 B
For G3 Facsimile (Option) [DA-FG600]
Standard Compliance10Base-T Ethernet (IEEE 802.3), 100Base-TX Fast Ethernet (IEEE802.3u)
Connector Interfaces10/100 Base-TX port: RJ-45
Compatibility IETF RFC 3965, ITU-T T.37
Communication ProtocolTCP/IP, SMTP, POP3, MIME
File FormatTIFF [IETF RFC 3949 Profile S, F, J]
PDF
Email Receiving WidthMaximum LEDGER size
For Internet Fax (Email) [Standard] 
						

							Appendix
68
Paper SizeLetter-R/Legal
Paper Weight20 lb (75 g/m2)
Paper CapacityLetter-R : Maximum 2500 sheets
Legal : Maximum 1500 sheets
Applicable ModelDP-8060/8045/8035
Letter-R/Legal Size Adaptor for 3000-Sheet Tray (LCT) (DA-TK31)
2-Bin Finisher (DA-FS600)
Paper SizeLetter (Letter-R/Legal with optional DA-TK31)
Paper Weight16 - 24 lb (60 - 90 g/m2)
Paper CapacityMaximum 3000 sheets x 20 lb (75 g/m2)
Electrical RequirementsSupplied from copier
Dimensions (W x D x H)11.7 x 17.5 x 19.9 in (295 x 445 x 505 mm)
Weight33 lb (15 kg)
Applicable ModelsDP-8060/8045/8035
3000-Sheet Tray (LCT) (DA-MA301)
Specifications
ModeNon-sort/Sort/Staple
Paper SizeInvoice/Letter/Letter-R/Legal/Ledger
Paper Weight16 - 35 lb (60 - 135 g/m2): Non-sort mode
Paper CapacityMaximum: 1000 sheets / 30 set (Stapling mode)
Staple Paper SizeLetter/Letter-R/Legal/Ledger
Paper Weight
17 - 21 lb (64 - 80 g/m2)
Capacity2-50 sheets: Letter (20 lb: 75 g/m
2)
2-30 sheets: Letter-R/Legal/Ledger (20 lb: 75 g/m2)
PointRear 1/Front 1/Middle 2-Point Staple
Electrical RequirementsSupplied from copier
Dimensions (W x D x H)26.4 x 24.2 x 59.1 in (670 x 613 x 1500 mm)
Weight70 lb (32 kg)
Applicable ModelsDP-8060/8045 
						

							69Appendix
Mode 1 Bin and 2 BinNon-sort/Sort/Staple
Stitch TraySaddle-Stitch
Paper  Size 1 Bin and 2 BinInvoice/Letter/Letter-R/Legal/Ledger
Stitch TrayLetter-R/Ledger
Paper Weight16 - 35 lb (60 - 135 g/m2): Non-sort mode
Paper 1 Bin and 2 BinMaximum: 1000 sheets / 30 set (Stapling mode)
Capacity
Stitch TrayMaximum: 30 set
Staple Paper SizeLetter/Letter-R/Legal/Ledger
Paper Weight17 - 21 lb (64 - 80 g/m2)
Capacity2 - 50 sheets: Letter (20 lb: 75 g/m
2)
2 - 30 sheets: Letter-R/Legal/Ledger (20 lb: 75 g/m2)
PointRear 1/Front 1/Middle 2-Point Staple
Saddle-Stitch Paper SizeLetter-R/Ledger
Paper Weight17 - 21 lb (64 - 80 g/m2)
Stack11 - 15 sheets: 10 sets/6 - 10 sheets: 15 sets/2 - 5 sheets: 25 sets
Electrical RequirementsSupplied from copier
Dimensions (W x D x H)26.4 x 24.2 x 59.1 in (670 x 613 x 1500 mm)
Weight114 lb (52 kg)
Applicable ModelsDP-8060/8045
2-Bin Saddle-Stitch Finisher (DA-FS605)
Paper SizeLetter/Ledger : 3-hole / Letter-R/Legal : 2-hole
Paper Weight17 - 35 lb (64 - 133 g/m2)
Applicable ModelsDP-8060/8045
Punch Unit (DA-SP31) [for DA-FS600/605]
2-Bin Finisher (DA-FS330) (1/2)

Mode 1 BinNon-sort/Sort
2 BinNon-sort/Shift-Sort (Letter Portrait only)/Staple (Letter Portrait only)
Paper Size 1 BinInvoice/Letter/Letter-R/Legal/Ledger
2 BinLetter
Paper Weight16 - 35 lb (60 - 135 g/m2): Non-sort mode
Paper 1 Bin100 sheets
Capacity
2 BinMaximum: 1000 sheets / 30 set (Stapling mode)
Staple Paper SizeLetter
Paper Weight17 - 21 lb (64 - 80 g/m2)
Capacity2 - 30 sheets: 20 lb (75 g/m2)
Point1-Point Staple 
						

							Appendix
70
1-Bin Saddle-Stitch Finisher (DA-FS355A)
Paper SizeLetter/Ledger : 3-hole
Letter-R/Legal : 2-hole
Paper Weight17 - 35 lb (64 - 133 g/m2)
Applicable ModelDP-8045/8035
Punch Unit (DA-SP41) [for DA-FS355A]
PunchPaper SizeLetter/Ledger: 3-hole
Paper Weight16 - 28 lb (60 - 105 g/m2)
Electrical RequirementsSupplied from copier
Dimensions (W x D x H)16.6 x 20.5 x 17.0 in (420 x 520 x 430 mm)
Weight33 lb (15 kg)
Applicable ModelDP-8035
2-Bin Finisher (DA-FS330) (2/2)
Specifications
Mode BinNon-sort/Sort/Staple
Stitch TraySaddle-Stitch
Paper Size BinInvoice/Letter/Letter-R/Legal/Ledger
Stitch TrayLetter-R/Ledger
Paper Weight16 - 35 lb (60 - 135 g/m2): Non-sort mode
Paper BinMaximum:  1000 sheets / 30 set (Stapling mode)
CapacityBin
Stitch TrayMaximum:  20 set
Staple Paper SizeLetter/Letter-R/Legal/Ledger
Paper Weight17 - 21 lb (64 - 80 g/m2)
Capacity2 - 50 sheets: Letter/Letter-R (20 lb 75 g/m
2)
2 - 25 sheets: Legal/Ledger (20 lb 75 g/m2)
PointRear 1/Front 1/Middle 2-Point Staple
Saddle-Stitch Paper SizeLetter-R/Ledger
Paper Weight17 - 21 lb (64 - 80 g/m2)
Stack6 - 10 sheets: 10 sets/1 - 5 sheets: 20 sets
Electrical RequirementsSupplied from copier
Dimensions (W x D x H)21.7  x 23.7 x 18.3 in (550 x 600 x 464 mm)
Weight62 lb (28 kg)
Applicable ModelsDP-8045/8035