Panasonic Digital Imaging Systems For Basic Operations Dp 8060 Operating Instructions

							41
Problem Solving
DA-FS330 DA-FS355
DA-FS355ADA-FS600 DA-FS605
AB
E
F
G HJ
■ ■■ ■
■ Locations/User Error Codes (J Codes)
Removing Misfed Paper
Code Check Points
J19 Paper Feed Section and ADU Section
J29 System Console Section
J82, J83, ADU Section and Fuser/Exit Section
J84, J85,
J88
J30, J31, Paper Feed Section and Fuser/Exit Section
J40,
J42-J45
J41, J50, Fuser/Exit Section and Paper
J51, J52, Transport  Section
J53, J86
J80, J81, Fuser/Exit Section
J87
J54-J55 Paper Transport  Section
J60-J64Optional Finisher Section
J70-J79ADF Section
J92-J94
Code Check Points
J00 Sheet Bypass (Remove the misfed paper,
and then open and close the cover)
J01, J17, Paper Tray 1 and Paper Feed Section
J21 (Paper Tray 1-4 and Sheet Bypass)
J02, J22 Paper Tray 2 and Paper Feed Section
(Paper Tray  2)
J03, J23 Paper Tray 3 and Paper Feed Section
(Paper Tray  2-4)
J04, J24 Paper Tray 4 and Paper Feed Section
(Paper Tray 3, 4)
J07, J08, Paper Feed Section
J09, J27, (Paper Tray 2 and Optional Paper Tray 3
J28 and 4)
J06, J16, LCT  Section
J26 Paper Feed Section
J18, J33 Paper Feed Section
(Paper Tray 1-4 and Sheet Bypass)
Verify that the media type selection in the
control panel matches the media loaded on
the trays.
Ex:
Select Transparency when Transparencies
are loaded in the Sheet Bypass
HH H
I
I
DC
Finisher
i-ADF Copier
ADU
Paper Feed Unit
LCT
H:Finisher (See pages 48-50)
 I:Saddle-Stitch Finisher (See pages 51-52)
J:i-ADF (See page 53)
A:System Console (See page 42)
B:Paper Entry Area (See page 43)
C: Paper Transport Area (See page 44)
D: Paper Exit/Fuser Area (See page 45)
E: ADU Area (See page 46)
F: Reverse Area (See page 47)
G: 3000-Sheet Tray (LCT) Area (See page 47)
●The display indicates the section of the
misfed paper. Remove the misfed paper
and check to see if the misfed location
indicator has been cleared. If other
locations indicate presence of paper,
remove them and check the display again.
●If an unknown error code appears, or
cannot clear the error codes, switch off
the machine and contact the authorized
Panasonic dealer.
Misfed Indicator
●
Indicates to open each cover, check
and remove any misfed paper.
Jam Location 
						

							Problem Solving
42
Open
4
1
2
3
■ ■■ ■
■ System Console (Option) (A)
5
Removing Misfed Paper
Right Lower Cover
Misfed Paper
Remove
Close
Right Lower Cover
CloseOpen
Pull
Remove 
						

							43
Problem Solving
1
2
■ ■■ ■
■ Paper Entry Area (B)
1
4
5
2
3
Right Cover
Open
Misfed Paper
Remove
Remove
Pull
Close
Close
Right Cover 
						

							Problem Solving
44
■ ■■ ■
■ Paper Transport Area (C)
1
24
5
3
Removing Misfed Paper
Open
Transport Release Lever (Green)
Turn
Remove
Paper
Transport
Knob
(Green)
Turn until it stops
Close 
						

							45
Problem Solving
5
6
7
8
■ ■■ ■
■ Paper Exit/Fuser Area (D)
1
2
3
4
Open
Open
Exit Cover
Fuser Knob
(Green)
Magnet
Heat Roller Cover
Remove
Caution
heated
surface
Heat Roller Cover
Magnet
Close
Exit Cover
Close 
						

							Problem Solving
46
1
2
3
4
■ ■■ ■
■ Automatic Duplex Unit (ADU) (E)
5
6
7
8
9
Removing Misfed Paper
Open
Turn
Transport Release Lever (Green)
Pull
Automatic Duplex Unit
Green Knob 5 (Center)
Green Knob 5 (Left)
Automatic Duplex Unit
Push
Green Knob 5 (Right)
Turn until it stops
Close 
						

							47
Problem Solving
■ ■■ ■
■ Reverse Area (F)
1
2
31
2
3
When the optional 3000-
Sheet Tray (LCT) (DA-
MA301) is installed.
■ ■■ ■
■ 3000-Sheet Tray (LCT) (Option) (G)
 Hold the latch and slide the large capacity
     paper tray to the right.
4
Open
Left Cover
Remove
Close
Left Cover
Misfed Paper
Latch
Misfed Paper
Door
Door
Close
Return 
						

							Problem Solving
48
1
2
3
When the optional 2-
Bin Finisher (DA-
FS600/605) is installed.
■ ■■ ■
■ 2-Bin Finisher (Option) (H)
4
5
6
7
8
9
Removing Misfed Paper
Misfed Paper
Remove
Push
Release button
Finisher
Punch Cover
Open
Turn to Mark
Misfed Paper
Punch Cover
Open
Finisher Upper Cover
Transport
Cover
Misfed Paper
Finisher Upper Cover
Return 
						

							49
Problem Solving
1
2
3
4
When the optional 2-
Bin Finisher
(DA-FS330) is
installed.5
6
7
8
9
●When paper cannot be removed:
■ ■■ ■
■ 2-Bin Finisher (Option) (H)
Upper Cover
Misfed Paper
Slide out
Pull out
Knob A
Misfed Paper
Knob B
Finisher Guide
Stapler Cover
Raise
Finisher Entry guide
Trash Box
Return
Release Button
Remove
Remove 
						

							Problem Solving
50
1
2
3
4
When the optional
1-Bin Saddle-Stitch
Finisher (DA-FS355A)
is installed.
■ ■■ ■
■ 1-Bin Saddle-Stitch Finisher
   (Option) (H)
5
Removing Misfed Paper
Remove
Misfed Paper
Slide outFinisher
Remove
Upper Cover
Return
Upper Cover
Return
Finisher
Release Button