Panasonic Digital Imaging Systems For Basic Operations Dp 8060 Operating Instructions

							51
Problem Solving
5
6
7
8
1
2
3
When the optional 2-Bin
Saddle-Stitch Finisher (DA-
FS605) is installed.
■ ■■ ■
■ 2-Bin Saddle-Stitch Finisher only
   (Option) (I)
49
Finisher
Push
Release button
Open
Lower Front
Cover
Turn
Push and Turn
SaddleExit
Cover
Open
Misfed Paper
Misfed Paper
Infeed
Cover
Infeed
CoverReturn
Return 
						

							Problem Solving
52
1
2
35
6
7
8
■ ■■ ■
■ 1-Bin Saddle-Stitch Finisher (Option) (I/F)
When the optional 1-Bin Saddle-Stitch Finisher (DA-
FS355A) is installed. (See page 50)
or
4
Removing Misfed Paper
Open
Finisher Front Cover
Lower
Knob
(Green)
Remove
Stitch Tray
Finisher Front Cover
Finisher
Slide
out
Inner Cover
Open
Misfed PaperRemove
Return
Finisher
Turn
Release Button
Close 
						

							53
Problem Solving
1
2
3
4
■ ■■ ■
■ i-ADF (J)
5
6
7
8
9
2
1
ADF Cover
Inner Cover
Green Mark
Misfed Paper
ADF Tray
Green
Labelled Tab
Exit Guide
Exit Guide
Misfed Paper
Remove
Paper Transport  Knob
ADF Cover
Close 
						

							Replacing Consumables
54
1
Adding Paper
■ ■■ ■
■ Paper Tray (1550-Sheet Paper Tray 1)
●Paper Weight: 16-24 lb
●Paper Capacity: 1550 Sheets (20 lb)
■ ■■ ■
■System Console (550-Sheet Paper
Tray 2-4)
●Paper Weight: 16-24 lb
●Paper Capacity: 550 Sheets (20 lb)
1
22
33
44
Open
Max Level Indicator
Close
Max Level Indicator
Close
Open 
						

							55
Replacing
Consumables
1
1
■ ■■ ■
■ Sheet Bypass
●Slide out the tray until it stops.
●Approximately up to 50
●Letter size sheets/20 lb●Paper Weight: 15-35 lb●To add paper to the Sheet Bypass, remove
the leftover paper from the tray, and align it
with the added paper and load them together
onto the tray.
●Load the paper with the unprinted side facing
upward.
●Do not exceed limit mark when loading paper.
●Incorrect adjustment may cause the paper to
wrinkle, misfeed or skew.
●If the paper size is not detected, remove
paper and press Reset Key. Then, load the
paper again.
■ ■■ ■
■Paper Tray  (3000-Sheet Tray  (LCT)
(Option))
2
1
●Do not touch the tray while it is moving.
●Paper Capacity: 3000 Sheets (20 lb)
●After tray stops, place paper neatly on the tray.
Letter size only (Portrait).
●Letter-R/Legal size is available when optional
Letter-R/Legal Size LCT Adapter (DA-TK31)
is installed.
2
2
3
3
44
Sheet Bypass
Side Guides
Adjust
Paper Feed Tray
Face-Up
Overfill Indicator
Close 
						

							Replacing Consumables
56
ATTENTION
●For optimum copy quality, it is recommended that only Panasonic Brand toner is used in the copier. Store toner in
a cool dark area with low humidity. Do not unseal the toner bottle unless you are ready to use it.
Replacing Toner  Bottle
5
Slide the Corona Cleaner in and out 3
or 4 times slowly, then return the
Corona Cleaner Handle to original
position.
Remove
Cap
1
2
1
2
4 3
Open
Pull
Toner Hopper
Empty Toner  Bottle
New Toner  Bottle
Shake
10 to 15 times
6
8
Toner Hopper
Close
9
Close
2
1Toner Bottle
Hopper
7 
						

							57
Replacing
Consumables
1
2
35
6
7
8
9
Replacing the Staple Cartridge
■ ■■ ■
■ 2-Bin Finisher (DA-FS330)
or
 
2
1
2
1Add Staples

When optional Finisher is installed, an Add
Staple message will be shown on the display.
4
Slide out
Open
Stapler Cover
Stapler Unit
Lock Lever
Pull out
Staple Cartridge
New
Empty
RemoveTape
Return
Close
Stapler Cover
Release Button 
						

							Replacing Consumables
58
■ ■■ ■
■2-Bin Finisher (DA-FS600)/2-Bin
Saddle-Stitch Finisher (DA-FS605)
10
11
12
13
1
2
3
2
1
3
Check the staple operation by following steps 11 to 13.
Place originals.
Select SORT/FINISH, and then select
STAPLE-SORT.
Press the Start key.
●When the Staple jams
The following message will be displayed on the
Touch Panel Display: “Can Not Complete Confirm
Staple Unit”
4
5
2
1
Replacing the Staple Cartridge
Return
Jammed
Staple
Remove
Tape
New
Empty
Pull out
Staple Cartridge
Push down
Staple CoverOpen
Start Key 
						

							59
Replacing
Consumables
6
7
81
2
3
4
Follow the steps 11 to 13 on page 58 to
check the staple operation.
2
1
■ ■■ ■
■ When supplying the 2-bin Saddle-Stitch
Finisher Unit with staples (DA-FS605 only)
●When the Staple jams
The following message will be displayed on the
Touch Panel Display: “Can Not Complete Confirm
Staple Unit”
21
3
5

Staple Cover
Close
Jammed
Staple
Open
Pull out
New
Empty
Staple Cartridge
Return
Until it stops 
						

							Replacing Consumables
60
6
7
8
Follow the steps 11 to 13 on page 58 to
check the staple operation.
■ ■■ ■
■ 1-Bin Saddle-Stitch Finisher (DA-FS355A)
21
1
2
3
4
5
●When the Staple jams
The following message will be displayed on the
Touch Panel Display: “Can Not Complete Confirm
Staple Unit”
1
3
2
4
Replacing the Staple Cartridge
Return
Until it
stops
Close
Open
Finisher Front Cover
Turn
Blue Mark
Stapler Unit
Staple Cartridge
Pull out
Empty Staple Case