Panasonic Digital Imaging Systems For Basic Operations Dp 8060 Operating Instructions

							31
Facsimile /
Internet Fax/Email
8
Select whether you wish to add this email
address to Favorites.
9
To enter other Email addresses:
Repeat steps 5 to 8
or
To exit this setting mode:
Press Reset Key.
memo:
Reset Key 
						

							Facsimile / Internet Fax/Email
32
Placing Originals (Facsimile/Internet Fax/Email)
■ ■■ ■
■ How to Place Originals
● ●● ●
● On the ADF/Platen (See page 21)
The original’s border (gray area)
will be lost during scanning.
Scanning
Width:
206 mm
(8.1) Ex:
Original Width:
216 mm (8.5)
Scanning Direction When transmitting non-standard size original(s),
the machine may perform Rotate Transmission
automatically and not transmit the portion of the
original that exceeds the standard size (“P” portion).
P
AA
Rotation XMT
Scanning DirectionThe portion labeled “P”
that exceeds the standard
original size is not sent.● ●● ●
● Sending Non-Standard Size Originals
●When an oversized original is sent
to another machine, sometimes, it is
reduced in accordance with the other
party’s recording paper size.Ex:
A
11 x 17 size
A
8.5 x 11 size
● ●● ●
● Scanning Area
● ●● ●
● Original Size
Maximum Size
Minimum Size
2000 mm (78.7)
Scanning
Direction
279 mm (11)
140 mm (5.5)
Scanning
Direction
140 mm (5.5)
From the Platen Glass
Maximum Size
432 mm (17)
279 mm (11)
From the ADF5 mm
(0.2)
5 mm
(0.2)8 mm (0.3)
with Header Area5 mm (0.2) 
						

							33
Facsimile /
Internet Fax/Email
Sending Scanned data via Facsimile
2
Press Fax/Email key.
Sending Originals (Facsimile)
1
Place Original(s) on the ADF or Platen
Glass.
●When scanning from the ADF, read the Notice
for ADF. (See page 21)
●When scanning from the Platen Glass, read the
Notice for Platen. (See page 21)

Face Up
Up to 85 sheets* (20 lb/Letter)
Face Down
Align with top left corner *70 Sheets : Invoice/Legal/Ledger
Scan
Facsimile Function
Telephone Line
Facsimile Machine 
						

							Facsimile / Internet Fax/Email
34
35
Select either ADDRESS BOOK DIALING,
or MANUAL NUMBER DIALING.
For ADDRESS BOOK DIALING
Telephone numbers should be registered in
advance. (See pages 28-29)
For MANUAL NUMBER DIALING
Facsimile: Enter the telephone number with the
Keypad, and then select OK.
EX:
Memory Transmit STN(s):001
TO:PANASONIC
5551234
PANASONICQUALITY DEPT
5551234
5551234
The document(s) will be stored into memory with
a file number.
Then starts dialing the telephone number
immediately after storing the first page.
The remaining page(s) continue to store into
memory.
4
●For more details, refer to the Operating
Instructions (For Facsimile and Internet Fax/
Email Functions).
Select MODE SETTING to configure
the desired Facsimile mode settings.Press the Start key.
NOTE
●When clearing the sending mode settings, press
the Reset key.
●To stop the transferring job, press the Stop key.
The cancellation message will appear on the
LCD. Follow the instructions on the Touch Panel
Display.
Reset Key
Stop Key Start Key
Sending Originals (Facsimile)
Memory Transmit STN(s):001
Add More STN(s)
Press START To Send
Select the destination 
						

							35
Facsimile /
Internet Fax/Email
Sending Scanned data via Internet Fax/Email
2
Press Fax/Email key.
Sending Originals (Internet Fax/Email)
1
Place Original(s) on the ADF or Platen
Glass.
●When scanning from the ADF, read the Notice
for ADF. (See page 21)
●When scanning from the Platen Glass, read the
Notice for Platen. (See page 21)

Face Up
Up to 85 sheets* (20 lb/Letter)
Face Down
Align with top left corner *70 Sheets : Invoice/Legal/Ledger
Scan
Computer Email Function
LAN/Internet
Internet Fax Function
LAN/Internet
Internet Fax Machine 
						

							Facsimile / Internet Fax/Email
36
MMM-dd-yyyy  15:00     0%
Ready To Fax
Original Set
AFRICA
ASIA AMERICA
ANTARTICA
APOLLO
BERLIN
BRAZIL
3
5
Select either ADDRESS BOOK EMAIL
ADDRESSING, or MANUAL EMAIL
ADDRESSING.
For ADDRESS BOOK EMAIL ADDRESSING
Email addresses should be registered in
advance. (See pages 30-31)
For MANUAL EMAIL ADDRESSING
Enter Addr(TO) STN(s):000
Enter Station(s)
[email protected]
@panasonic.com
@mgcs.co.jp
@abc-net.wxy.com
@host.pana.com
Internet Fax/Email:
Enter the Email address using the KEYBOARD.
Enter the Email address, and then select OK.
EX: [email protected] document(s) will be stored into memory with
a file number.
Then starts connecting to the LAN immediately
after storing the first page.
The remaining page(s) continue to store into
memory.
4
●For more details, refer to the Operating
Instructions (For Facsimile and Internet Fax/
Email Functions).
Select MODE SETTING to configure
the desired Internet Fax/Email mode
settings.
Press the Start key.
●Refer to How to use the Keyboard, in the
Address Book section. (See page 30)
NOTE
●When clearing the sending mode settings, press
the Reset key.
●To stop the transferring job, press the Stop key.
The cancellation message will appear on the
LCD. Follow the instructions on the Touch Panel
Display.
Reset Key
Stop Key Start Key
Sending Originals (Internet Fax/Email)
Memory Transmit STN(s):001
TO:PANASONIC
[email protected]
PANASONICQUALITY DEPT
Select the destination
1
2 
						

							37
Facsimile /
Internet Fax/Email
Receiving an Email from POP Server
Receiving Email Automatically
With “147 Auto POP Receive” set to “Valid” and POP acquisition interval set between 1 and 60 minutes in Fax
Parameters (refer to the Operating Instructions (For Facsimile and Internet Fax/Email Functions)), queries are transmitted
to the POP Server periodically to check for new mail.
If there is Email on the POP Server when a query is transmitted, it is retrieved and printed automatically.
1Press the Fax/Email key.3Check for incoming mail(s).
4Select “GET EMAIL”.
NOTE
●For instructions on how to configure the Internet Fax/Email, refer to the Operating Instructions (For Facsimile and
Internet Fax/Email Functions) on the provided CD-ROM.
Receiving Email Manually
With POP acquisition interval set between 1 and 60 minutes, queries are transmitted to the POP Server periodically to
check for new mail, and the number of the incoming Email messages on the server appears on the display.
2Select “MODE SETTING”.
Internet FAX MachineLAN
Computer
The retrieved Email is printed.
If set to other
function mode 
						

							Problem Solving
38
Troubleshooting
CheckAction
Unit Does Not Operate
Check if the Power Switches (Main Power Switch
on the back and Power Switch on the Left Side
of the machine) are turned ON and if the power
cord is plugged into the AC outlet. Does the display light?
Press Energy Saver key on the control panel.
(See page 15) Does the Energy Saver key flash (or light) and
displays are turned OFF?
Perform actions in accordance with each
message. Does any of the U## codes and messages
appear on the display?
(U1, U4, U6, U7, U11....etc.)
Add Staples (See pages 57-61)
Remove all jammed staples. (See pages 58-61) Does the Add Staples indicator and message
appear on the display?
Add paper. (See pages 54-55) Does the Add Paper indicator and message
appear on the display? ()
Remove the misfed paper. (See pages 41-53) Does the paper misfeed indicator and message
appear on the display? ()
Turn the Power Switch on the Left Side and the
Main Power Switch on the Back of the machine
to the OFF and ON. If the error code does not
clear, call your Service provider. Does E#-## indicator and message appear on
the display?
Turn the Power Switch on the Left Side and the
Main Power Switch on the Back of the machine
to the OFF and ON. The machine would not accept the next job
during operation, instructed job would not be
accepted for a long time period or job would
not be completed.
Light Copies
Touch the “DARKER” button. Does the contrast indicator say “LIGHTER”?
Replace the Toner Bottle.
(See page 56) Does the Add Toner indicator and message
appear on the display? (
) 
						

							39
Problem Solving
Marked Copies
Clean the Platen Glass or Sheet.
(See below) Is the copier Platen Glass or Platen Sheet
dirty?
Cover the original with a sheet of white paper
before copying for an OHP film original, or
lighten the contrast setting before copying a
dark original. Is the original an OHP film, or a dark original?
■ If the measures outlined above do not solve the problem, call your Service provider.
Action
Machine Care
■ As a rule, clean weekly.
Platen Sheet
Platen (Glass)Platen Glass/Platen Sheet
 Wipe marks off with a cloth and a neutral detergent.
 Wipe again with a dry cloth.
Check 
						

							Problem Solving
40
Code Check Points
U 1 Front Cover is open.
U 4 Finisher is separated from the machine.
U 6 Right Cover is open.
U 7 Right Lower Cover is open.
U 9 Left Cover is open.
U12 Finisher Staple Cover/Upper Cover is open.
Trash Box is not installed. (DA-FS330)
U13 Low Toner.
U16 Call your Service provider.
U18 Total Copy Count is limit, consult with your
Key Operator.
Code Check Points
U20 ADF is open.
U21 ADF is opened while scanning from ADF.
U30 Punch Dust Cover is open.
U31 Paper is remained in the Saddle-Stitcher
Unit.
U32 Finsher Infeed/Inner Cover is open.
(DA-FS605/FS355A)
U33 Stapler of Saddle Stitcher Unit is incorrectly
set. (DA-FS605/FS355A)
U34 Finisher Lower Front Cover is open.
(DA-FS605)
U35 Saddle Exit Cover is open. (DA-FS605)
U90 Need to replace the battery. (See page 64)
■ ■■ ■
■ User Error Codes (U Codes)
User (U) / Error Codes
U32
U4, U12
U30
U9
U35
U31, U33, U34U1U20, U21
U6
U13
U7